From e31b736d90b38d7868eb0baf88ab59a7887c7beb Mon Sep 17 00:00:00 2001 From: Benjamin Mako Hill Date: Mon, 18 Mar 2013 05:44:57 -0400 Subject: [PATCH 1/1] initial import of pristine upstream template --- README.tex | 37 + envlab.cfg | 47 ++ envlab.drv | 105 +++ envlab.dtx | 1759 +++++++++++++++++++++++++++++++++++++++ envlab.ins | 25 + envlab.sty | 617 ++++++++++++++ mitletter1.cls | 97 +++ mitlogo.eps | 2160 ++++++++++++++++++++++++++++++++++++++++++++++++ 8 files changed, 4847 insertions(+) create mode 100644 README.tex create mode 100644 envlab.cfg create mode 100644 envlab.drv create mode 100644 envlab.dtx create mode 100644 envlab.ins create mode 100644 envlab.sty create mode 100644 mitletter1.cls create mode 100644 mitlogo.eps diff --git a/README.tex b/README.tex new file mode 100644 index 0000000..38ae598 --- /dev/null +++ b/README.tex @@ -0,0 +1,37 @@ +\documentclass{mitletter1} +\makelabels +\begin{document} +\name{Your Name} +\signature{Your Name\\{\it Your Title}} + + + +\begin{letter}{Addressee's Name\\ +Title\\ +Company Name\\ +Street Address\\ +City, State/Province\\ +Zip/Postal code} + + +\opening{Dear Recipient,} +This a template for writing letters using the PSB LaTeX templates. There +are three new document classes, one for each letter template, called +"mitletter1", "mitletter2", and "mitletter3" respectively. + +First, one must modify each of the class files "mitletter1.cls", +"mitletter2.cls", and "mitletter3.cls" so that his/her personal +information is set. The parameters to change are: Office Name, Room +Number, Phone Number, Fax Number, website, E-mail, name, and title. The +last two parameters (name and title) are called "person" and "ID" within +the class files. + +Next, to compose a letter, one must: set the document class to one of the +above document classes, specify a name and (optionally) a signature, and +then proceed with writing the letter as if it were a standard letter. + +\closing{Sincerely} + +\end{letter} + +\end{document} diff --git a/envlab.cfg b/envlab.cfg new file mode 100644 index 0000000..f9a0262 --- /dev/null +++ b/envlab.cfg @@ -0,0 +1,47 @@ +%% +%% This is file `envlab.cfg', +%% generated with the docstrip utility. +%% +%% The original source files were: +%% +%% envlab.dtx (with options: `cfg') +%% +%% You are allowed and encouraged to modify THIS file. +%% +%% The first part of this file contains default options for your site. +%% The second part (inside AtEndOfPackage declaration) should contain +%% customization commands specific to your site. +%% +%% Good luck +%% +\ProvidesFile{envlab.cfg} +[1997/07/16 v1.2 Envelopes and Labels] +%% +%% \CharacterTable +%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z +%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z +%% Digits \0\1\2\3\4\5\6\7\8\9 +%% Exclamation \! Double quote \" Hash (number) \# +%% Dollar \$ Percent \% Ampersand \& +%% Acute accent \' Left paren \( Right paren \) +%% Asterisk \* Plus \+ Comma \, +%% Minus \- Point \. Solidus \/ +%% Colon \: Semicolon \; Less than \< +%% Equals \= Greater than \> Question mark \? +%% Commercial at \@ Left bracket \[ Backslash \\ +%% Right bracket \] Circumflex \^ Underscore \_ +%% Grave accent \` Left brace \{ Vertical bar \| +%% Right brace \} Tilde \~} +%% \changes{v1.2}{1996/07/16}{Updated User Guide} +%% +%% The default options go here +%% +\ExecuteOptions{businessenvelope,rotateenvelopes,centerenvelopes} +\ExecuteOptions{printbarcodes,capaddress} +\ExecuteOptions{nopswait,printreturnaddress,nopsautotray,nore} +%% +\AtEndOfPackage{\relax % Customization goes here +} +\endinput +%% +%% End of file `envlab.cfg'. diff --git a/envlab.drv b/envlab.drv new file mode 100644 index 0000000..52f0add --- /dev/null +++ b/envlab.drv @@ -0,0 +1,105 @@ +%% +%% This is file `envlab.drv', +%% generated with the docstrip utility. +%% +%% The original source files were: +%% +%% envlab.dtx (with options: `driver') +%% +%% IMPORTANT NOTICE: +%% +%% For the copyright see the source file. +%% +%% Any modified versions of this file must be renamed +%% with new filenames distinct from envlab.drv. +%% +%% For distribution of the original source see the terms +%% for copying and modification in the file envlab.dtx. +%% +%% This generated file may be distributed as long as the +%% original source files, as listed above, are part of the +%% same distribution. (The sources need not necessarily be +%% in the same archive or directory.) +\ProvidesFile{envlab.drv} +[1997/07/16 v1.2 Envelopes and Labels] +%% +%% Copyright Boris Veytsman 1996, 1997 +%% +%% +%% \CharacterTable +%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z +%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z +%% Digits \0\1\2\3\4\5\6\7\8\9 +%% Exclamation \! Double quote \" Hash (number) \# +%% Dollar \$ Percent \% Ampersand \& +%% Acute accent \' Left paren \( Right paren \) +%% Asterisk \* Plus \+ Comma \, +%% Minus \- Point \. Solidus \/ +%% Colon \: Semicolon \; Less than \< +%% Equals \= Greater than \> Question mark \? +%% Commercial at \@ Left bracket \[ Backslash \\ +%% Right bracket \] Circumflex \^ Underscore \_ +%% Grave accent \` Left brace \{ Vertical bar \| +%% Right brace \} Tilde \~} +\documentclass{ltxdoc} +\DoNotIndex{\@Alph,\@alph,\@arabic,\@badmath} +\DoNotIndex{\@centercr} +\DoNotIndex{\@empty,\@ignoretrue} +\DoNotIndex{\@ixpt} +\DoNotIndex{\@M,\@minus,\@ne,\@plus} +\DoNotIndex{\\,\addtolength} +\DoNotIndex{\advance} +\DoNotIndex{\ast,\begin,\begingroup,\bfseries,\bgroup,\box} +\DoNotIndex{\bullet} +\DoNotIndex{\cdot,\cr,\day,\DeclareOption} +\DoNotIndex{\def,\DocInput,\documentclass} +\DoNotIndex{\DoNotIndex,\egroup,\ifx,\else,\fi,\endtrivlist} +\DoNotIndex{\EnableCrossrefs,\end,\end@dblfloat,\end@float,\endgroup} +\DoNotIndex{\endlist,\everycr,\ExecuteOptions} +\DoNotIndex{\filedate,\filename,\fileversion} +\DoNotIndex{\global,\halign,\hangindent,\hbox,\hfil,\hfill,\hrule} +\DoNotIndex{\hsize,\hskip,\hspace,\hss,\ifcase,\or,\fi} +\DoNotIndex{\ifvmode,\fi,\ifnum,\fi,\input} +\DoNotIndex{\kern,\leavevmode,\let,\leftmark} +\DoNotIndex{\list,\llap,\long,\m@ne,\m@th,\mark} +\DoNotIndex{\month,\newcommand,\newcounter,\newenvironment} +\DoNotIndex{\NeedsTeXFormat,\newdimen} +\DoNotIndex{\newpage,\nobreak,\noindent,\number} +\DoNotIndex{\p@} +\DoNotIndex{\pagestyle,\par} +\DoNotIndex{\penalty,\PrintChanges,\PrintIndex,\ProcessOptions} +\DoNotIndex{\protect,\ProvidesClass,\raggedbottom,\raggedright} +\DoNotIndex{\refstepcounter,\relax,\renewcommand,\reset@font} +\DoNotIndex{\rightmargin,\rlap,\rmfamily} +\DoNotIndex{\setbox,\setcounter,\setlength} +\DoNotIndex{\skip,\slshape,\space} +\DoNotIndex{\trivlist,\typeout,\tw@} +\DoNotIndex{\vskip,\vspace,\year,\z@} +\DoNotIndex{\@ptsize,\@sptoken,\addtocounter,\afterassignment} +\DoNotIndex{\AtEndOfPackage,\baselineskip,\boxmaxdepth,\clearpage} +\DoNotIndex{\clubpenalty,\csname,\CurrentOption,\DeclareRobustCommand} +\DoNotIndex{\eject,\endcsname,\evensidemargin,\expandafter} +\DoNotIndex{\footnotesize,\footskip,\fromaddress,\futurelet} +\DoNotIndex{\headheight,\headsep,\hfuzz,\ignorespaces} +\DoNotIndex{\InputIfFileExists,\large,\lineskip,\loop} +\DoNotIndex{\MakeUppercase,\MessageBreak,\mbox,\multiply} +\DoNotIndex{\newcount,\newif,\newlength,\newtoks,\nolinebreak} +\DoNotIndex{\nopagebreak,\normalfont,\normalsize,\null,\newline} +\DoNotIndex{\oddsidemargin,\PackageError,\PackageInfo} +\DoNotIndex{\paperheight,\paperwidth,\parbox,\parindent} +\DoNotIndex{\PassOptionsToPackage,\ProvidesPackage,\RequirePackage} +\DoNotIndex{\rule,\selectfont,\sffamily,\sloppy,\small,\spaceskip} +\DoNotIndex{\stepcounter,\textheight,\textwidth,\the,\topmargin} +\DoNotIndex{\unhbox,\voidb@x,\vsize,\vfuzz,\widowpenalty,\xspaceskip} +\DoNotIndex{\AtBeginDocument,\AtEndDocument} +\usepackage{enumerate} +\CodelineIndex +\RecordChanges +\EnableCrossrefs +\begin{document} + \DocInput{envlab.dtx} +\end{document} +%% \changes{v1.2}{1996/07/16}{Updated User Guide} +\endinput +%% +%% End of file `envlab.drv'. diff --git a/envlab.dtx b/envlab.dtx new file mode 100644 index 0000000..6e479b4 --- /dev/null +++ b/envlab.dtx @@ -0,0 +1,1759 @@ +% \iffalse +%<*driver> +\ProvidesFile{envlab.drv} +% +%<*driver|package|cfg> +%<+package>\ProvidesPackage{envlab} +%<+cfg>\ProvidesFile{envlab.cfg} +[1997/07/16 v1.2 Envelopes and Labels] +% +%<*driver|package> +%% +%% Copyright Boris Veytsman 1996, 1997 +%% +% +%<*driver|package|cfg> +% \fi +%% +% \CheckSum{1378} +%% \CharacterTable +%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z +%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z +%% Digits \0\1\2\3\4\5\6\7\8\9 +%% Exclamation \! Double quote \" Hash (number) \# +%% Dollar \$ Percent \% Ampersand \& +%% Acute accent \' Left paren \( Right paren \) +%% Asterisk \* Plus \+ Comma \, +%% Minus \- Point \. Solidus \/ +%% Colon \: Semicolon \; Less than \< +%% Equals \= Greater than \> Question mark \? +%% Commercial at \@ Left bracket \[ Backslash \\ +%% Right bracket \] Circumflex \^ Underscore \_ +%% Grave accent \` Left brace \{ Vertical bar \| +%% Right brace \} Tilde \~} +% \iffalse +% +% +% \section{Documentation driver} +%<*driver> +% Nothing interesting here\dots +% \begin{macrocode} +\documentclass{ltxdoc} +\DoNotIndex{\@Alph,\@alph,\@arabic,\@badmath} +\DoNotIndex{\@centercr} +\DoNotIndex{\@empty,\@ignoretrue} +\DoNotIndex{\@ixpt} +\DoNotIndex{\@M,\@minus,\@ne,\@plus} +\DoNotIndex{\\,\addtolength} +\DoNotIndex{\advance} +\DoNotIndex{\ast,\begin,\begingroup,\bfseries,\bgroup,\box} +\DoNotIndex{\bullet} +\DoNotIndex{\cdot,\cr,\day,\DeclareOption} +\DoNotIndex{\def,\DocInput,\documentclass} +\DoNotIndex{\DoNotIndex,\egroup,\ifx,\else,\fi,\endtrivlist} +\DoNotIndex{\EnableCrossrefs,\end,\end@dblfloat,\end@float,\endgroup} +\DoNotIndex{\endlist,\everycr,\ExecuteOptions} +\DoNotIndex{\filedate,\filename,\fileversion} +\DoNotIndex{\global,\halign,\hangindent,\hbox,\hfil,\hfill,\hrule} +\DoNotIndex{\hsize,\hskip,\hspace,\hss,\ifcase,\or,\fi} +\DoNotIndex{\ifvmode,\fi,\ifnum,\fi,\input} +\DoNotIndex{\kern,\leavevmode,\let,\leftmark} +\DoNotIndex{\list,\llap,\long,\m@ne,\m@th,\mark} +\DoNotIndex{\month,\newcommand,\newcounter,\newenvironment} +\DoNotIndex{\NeedsTeXFormat,\newdimen} +\DoNotIndex{\newpage,\nobreak,\noindent,\number} +\DoNotIndex{\p@} +\DoNotIndex{\pagestyle,\par} +\DoNotIndex{\penalty,\PrintChanges,\PrintIndex,\ProcessOptions} +\DoNotIndex{\protect,\ProvidesClass,\raggedbottom,\raggedright} +\DoNotIndex{\refstepcounter,\relax,\renewcommand,\reset@font} +\DoNotIndex{\rightmargin,\rlap,\rmfamily} +\DoNotIndex{\setbox,\setcounter,\setlength} +\DoNotIndex{\skip,\slshape,\space} +\DoNotIndex{\trivlist,\typeout,\tw@} +\DoNotIndex{\vskip,\vspace,\year,\z@} +% +\DoNotIndex{\@ptsize,\@sptoken,\addtocounter,\afterassignment} +\DoNotIndex{\AtEndOfPackage,\baselineskip,\boxmaxdepth,\clearpage} +\DoNotIndex{\clubpenalty,\csname,\CurrentOption,\DeclareRobustCommand} +\DoNotIndex{\eject,\endcsname,\evensidemargin,\expandafter} +\DoNotIndex{\footnotesize,\footskip,\fromaddress,\futurelet} +\DoNotIndex{\headheight,\headsep,\hfuzz,\ignorespaces} +\DoNotIndex{\InputIfFileExists,\large,\lineskip,\loop} +\DoNotIndex{\MakeUppercase,\MessageBreak,\mbox,\multiply} +\DoNotIndex{\newcount,\newif,\newlength,\newtoks,\nolinebreak} +\DoNotIndex{\nopagebreak,\normalfont,\normalsize,\null,\newline} +\DoNotIndex{\oddsidemargin,\PackageError,\PackageInfo} +\DoNotIndex{\paperheight,\paperwidth,\parbox,\parindent} +\DoNotIndex{\PassOptionsToPackage,\ProvidesPackage,\RequirePackage} +\DoNotIndex{\rule,\selectfont,\sffamily,\sloppy,\small,\spaceskip} +\DoNotIndex{\stepcounter,\textheight,\textwidth,\the,\topmargin} +\DoNotIndex{\unhbox,\voidb@x,\vsize,\vfuzz,\widowpenalty,\xspaceskip} +\DoNotIndex{\AtBeginDocument,\AtEndDocument} +\usepackage{enumerate} +\CodelineIndex +\RecordChanges +\EnableCrossrefs +\begin{document} + \DocInput{envlab.dtx} +\end{document} +% \end{macrocode} +% +% \fi +% +% \changes{v0.9}{1996/05/31}{Beta version} +% \changes{v0.91}{1996/05/31}{Added new option---"alwaysbarcodes"} +% \changes{v1.0}{1996/06/09}{First released version} +% \changes{v1.1}{1996/07/08}{Fixed typos in "elold.ins"} +% \changes{v1.1}{1996/07/08}{Updated User Guide} +% \changes{v1.2}{1996/07/10}{Changed envlab.ins: made it parallel.} +%% \changes{v1.2}{1996/07/16}{Updated User Guide} +% +% \newcommand{\EL}{\textsl{EnvLab}} +% +% +% \GetFileInfo{envlab.drv} +% +% \title{Printing Envelopes and Labels in \LaTeXe: \EL\ Package +% \thanks{This file +% has version number \fileversion, last +% revised \filedate.} +% \thanks{\copyright Boris Veytsman, 1996, 1997} +% } +% \author{Boris Veytsman} +% \date{\filedate} +% \maketitle +% +% \tableofcontents +% +% +% \section{Introduction} +% \MakeShortVerb{\"} +% The standard "\makelabels" command in the \LaTeXe\ "letter.cls" +% documentclass typesets labels on Avery 5352 sheets. A typical user +% may want more. \EL\ redefines "\makelabels" in\footnote{hopefully} +% a more useful and customizable way +% +% The detailed usage of the package is described in the file +% "elguide.tex". Here we just comment the macros. +% +% \StopEventually +% +% \section{Identification} +% +% First, we must say ``Hello world.'' +% \begin{macrocode} +%<*package> +\NeedsTeXFormat{LaTeX2e} +% \end{macrocode} +% +% \begin{macro}{\envlab@ok} +% \begin{macro}{\envlab@oops} +% \changes{v1.2}{1997/07/10}{Used \cs{@ifundefined} instead of direct check} +% Now let us check whether we in the letter documentclass. Actually we +% will accept any class that has "\makelabels" defined (custom letter +% classes, etc.) +% \begin{macrocode} +\def\envlab@oops{% + \PackageError{envlab}% + {Envlab is used outside of \MessageBreak% + a letter-compatible documentclass}% + {You are trying to use Envelopes & Labels\MessageBreak% + package, but your documentclass does not\MessageBreak% + understand address formatting commands.\MessageBreak% + Try standard document class letter\MessageBreak}} +\def\envlab@ok{% + \PackageInfo{envlab}% + {Envelopes & Labels package: found makelabels...\MessageBreak% + Seems everything is OK. Good luck.}} +\@ifundefined{makelabels}{\envlab@oops}{\envlab@ok} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \section{Preliminary code} +% +% \subsection{Switches, etc.} +% +% +% \DescribeMacro{\if@envelope} +% \DescribeMacro{\if@biglabel} +% \changes{v1.2}{1997/07/13}{Added Big Labels---thanks to Genick +% Bar-Meir, "meyerson@msi.umn.edu"} +% There are three kinds of things we can print: envelopes (default) +% labels and big labels The differences are summarized in +% Table~\ref{tab:diffs}. +% \begin{table} +% \begin{center} +% \begin{tabular}{cccc} +% \hline +% Media & Number per page & Rotation & Return address \\ +% \hline +% Envelopes & One & Settable & Yes\\ +% Labels & Several & Not rotated & No\\ +% Big Labels & Several & Not rotated & Yes\\ +% \hline +% \end{tabular} +% \end{center} +% \caption{Differences between envelopes, labels and big labels} +% \label{tab:diffs} +% \end{table} +% +% \begin{macrocode} +\newif\if@envelope +\@envelopetrue +\newif\if@biglabel +\@biglabelfalse +% \end{macrocode} +% +% \DescribeMacro{\if@rotateenvelopes} +% \DescribeMacro{\if@printreturnaddress} +% Now we must determine whether we want to rotate envelopes and +% whether to include return address (both yes by default). +% \begin{macrocode} +\newif\if@rotateenvelopes +\@rotateenvelopestrue +\newif\if@printreturnaddress +\@printreturnaddresstrue +% \end{macrocode} +% +% \DescribeMacro{\@envelopeposition} +% Now let us decide how to print envelopes. They can be either centered +% (default) \emph{or} shifted to the left or to the right of the paper +% tray. The +% counter "\@envelopeposition" can be, correspondingly, either 0 or 1 +% or 2. The value of +% 3 corresponds to the ``custom placing'', when the user sets +% "\EnvelopeLeftMargin" manually. +% +% \begin{macrocode} +\newcount\@envelopeposition +\@envelopeposition=0\relax +% \end{macrocode} +% +% \begin{macro}{\if@pswait} +% \changes{v1.1}{1996/07/08}{Added \cs{if@pswait}} +% \begin{macro}{\if@psautotray} +% \changes{v1.1}{1997/07/13}{Added \cs{if@psautotray}} +% \begin{macro}{\PSEnvelopeTray} +% \changes{v1.1}{1997/07/13}{Added \cs{PSEnvelopeTray}} +% The switches "\if@pswait" and "\if@psautotray" control optional manual +% feeding of envelopes and labels in \textsl{Postscript} printers +% (see Section~\ref{sec:Print} for details). The register +% "\PSEnvelopeTray" contains the name of the required tray. +% \begin{macrocode} +\newif\if@pswait +\@pswaitfalse +\newif\if@psautotray +\@psautotrayfalse +\newtoks\PSEnvelopeTray +\PSEnvelopeTray={/otherenvelopetray } +% \end{macrocode} +% +% \end{macro} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\if@barcodes} +% \begin{macro}{\if@alwaysbarcodes} +% We can either print bar codes (default) or not. The second switch +% forces to print barcodes even if they are not last in the address +% (like "Pa 16801\\USA") +% \begin{macrocode} +\newif\if@barcodes +\newif\if@alwaysbarcodes +\@barcodestrue +\@alwaysbarcodesfalse +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\if@EL@redefine@opening} +% \changes{v1.2}{1997/07/14}{Wrote new command} +% Now let us decide whether to mess with the "\opening" command. +% \begin{macrocode} +\newif\if@EL@redefine@opening +\@EL@redefine@openingfalse +% \end{macrocode} +% \end{macro} +% +% +% \begin{macro}{\if@capitalizeaddress} +% Also, we can either capitalize the address (default) or not. +% \begin{macrocode} +\newif\if@capitalizeaddress +\@capitalizeaddresstrue +% \end{macrocode} +% \end{macro} +% +% \subsection{Lengths and numbers} +% +% We want all lengths to be user settable, so no "@" in the names. +% +% +% \DescribeMacro{\EnvelopeWidth} +% \DescribeMacro{\EnvelopeHeight} +% \DescribeMacro{\EnvelopeTopMargin} +% \DescribeMacro{\EnvelopeLeftMargin} +% An envelope has four basic lengths. +% The first two are self-evident. The third is the distance between the +% edge of the paper and the leading edge of the envelope. All +% pre-defined envelope sizes set this to zero. The fourth is the distance +% between the left edge of the paper and the envelope. Its value depends +% on the value of the "\@envelopeposition" variable. We will preset it to +% zero +% \begin{macrocode} +\newlength{\EnvelopeWidth} +\newlength{\EnvelopeHeight} +\newlength{\EnvelopeTopMargin} +\newlength{\EnvelopeLeftMargin} +\setlength{\EnvelopeLeftMargin}{0pt} +% \end{macrocode} +% +% +% \DescribeMacro{\LabelWidth} +% \DescribeMacro{\LabelHeight} +% \DescribeMacro{\LabelTopMargin} +% \DescribeMacro{\LabelLeftMargin} +% \DescribeMacro{\LabelRightMargin} +% A label has more parameters. +% The first two are the same as for the envelopes. The next two define the +% distances from the paper edges to the beginning of the labels. The +% last one describes the distance between the labels. +% \begin{macrocode} +\newlength{\LabelWidth} +\newlength{\LabelHeight} +\newlength{\LabelTopMargin} +\newlength{\LabelLeftMargin} +\newlength{\LabelRightMargin} +% \end{macrocode} +% +% \DescribeMacro{\c@LabelMaxCol} +% \DescribeMacro{\c@LabelMaxRow} +% The following numbers define, how many labels are in each row and how +% many rows are on each page +% \begin{macrocode} +\newcounter{LabelMaxCol} +\newcounter{LabelMaxRow} +% \end{macrocode} +% +% The lengths above are \emph{external} parameters that determine an +% envelope or a label. Now we will describe \emph{internal} lengths. We +% define them here because the commands "\SetEnvelope" and "\SetLabel" +% determine them basing on the given envelope or label type. +% +% +% \DescribeMacro{\FromAddressTopMargin} +% \DescribeMacro{\FromAddressLeftMargin} +% \DescribeMacro{\FromAddressHeight} +% \DescribeMacro{\FromAddressWidth} +% \DescribeMacro{\ToAddressTopMargin} +% \DescribeMacro{\ToAddressLeftMargin} +% \DescribeMacro{\ToAddressWidth} +% The following lengths are self-evident. +% \begin{macrocode} +\newlength{\FromAddressTopMargin} +\newlength{\FromAddressLeftMargin} +\newlength{\FromAddressHeight} +\newlength{\FromAddressWidth} +\newlength{\ToAddressTopMargin} +\newlength{\ToAddressLeftMargin} +\newlength{\ToAddressWidth} +% \end{macrocode} +% +% \subsection{Main setting commands} +% +% OK, we are ready to set up envelopes and labels. +% +% \begin{macro}{\SetEnvelope} +% \changes{v1.2}{1997/07/14}{Added \cs{@biglabelfalse}} +% The command "\SetEnvelope" has three parameters: optional top Margin, +% width and height of the envelope. +% \begin{macrocode} +\DeclareRobustCommand{\SetEnvelope}[3][0pt]{% + \@envelopetrue% + \@biglabelfalse% + \setlength{\EnvelopeTopMargin}{#1}% + \setlength{\EnvelopeWidth}{#2}% + \setlength{\EnvelopeHeight}{#3}% + \setlength{\FromAddressTopMargin}{0.5in}% + \setlength{\FromAddressLeftMargin}{0.5in}% + \setlength{\FromAddressHeight}{0.33\EnvelopeHeight}% + \setlength{\FromAddressWidth}{0.5\EnvelopeWidth}% + \setlength{\ToAddressTopMargin}{0.5in}% + \setlength{\ToAddressLeftMargin}{0.5in}% + \setlength{\ToAddressWidth}{3in}} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\SetLabel} +% \changes{v1.2}{1997/07/14}{Added \cs{@biglabelfalse}} +% The command "\SetLabel" has seven parameters: five lengths and two +% numbers. All are mandatory: +% \begin{macrocode} +\DeclareRobustCommand{\SetLabel}[7]{% + \@envelopefalse% + \@biglabelfalse% + \setlength{\LabelWidth}{#1}% + \setlength{\LabelHeight}{#2}% + \setlength{\LabelTopMargin}{#3}% + \setlength{\LabelLeftMargin}{#4}% + \setlength{\LabelRightMargin}{#5}% + \setcounter{LabelMaxCol}{#6}% + \setcounter{LabelMaxRow}{#7}% + \setlength{\ToAddressTopMargin}{0.1in}% + \setlength{\ToAddressLeftMargin}{0.2in}% + \setlength{\ToAddressWidth}{\LabelWidth}% + \addtolength{\ToAddressWidth}{-\ToAddressLeftMargin}% + \addtolength{\ToAddressWidth}{-\LabelRightMargin}} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\SetBigLabel} +% \changes{v1.2}{1997/07/14}{Wrote new command} +% The command "\SetBigLabel" has seven parameters: five lengths and two +% numbers. All are mandatory: +% \begin{macrocode} +\DeclareRobustCommand{\SetBigLabel}[7]{% + \@envelopefalse% + \@biglabeltrue% + \setlength{\LabelWidth}{#1}% + \setlength{\LabelHeight}{#2}% + \setlength{\LabelTopMargin}{#3}% + \setlength{\LabelLeftMargin}{#4}% + \setlength{\LabelRightMargin}{#5}% + \setcounter{LabelMaxCol}{#6}% + \setcounter{LabelMaxRow}{#7}% + \setlength{\FromAddressTopMargin}{0.0in}% + \setlength{\FromAddressLeftMargin}{0.5in}% + \setlength{\FromAddressHeight}{0.33\LabelHeight}% + \setlength{\ToAddressTopMargin}{0.1in}% + \setlength{\ToAddressLeftMargin}{0.5in}% + \setlength{\ToAddressWidth}{\LabelWidth}% + \addtolength{\ToAddressWidth}{-\ToAddressLeftMargin}% + \addtolength{\ToAddressWidth}{-\LabelRightMargin}% + \setlength{\FromAddressWidth}{\ToAddressWidth}} +% \end{macrocode} +% \end{macro} +% +% \section{Defining options} +% +% \subsection{Envelope Sizes} +% \changes{v1.2}{1996/07/22}{Added new option: dlenvelope (thanks to +% "J.P.Jansen@net.HCC.nl")} +% \changes{v1.2}{1997/07/13}{Added \cs{PSEnvelopeTray} to envelope +% options} +% \begin{macrocode} +\DeclareOption{businessenvelope}{\SetEnvelope{9.5in}{4.125in}% + \PSEnvelopeTray={/com10envelopetray }} +\DeclareOption{executiveenvelope}{\SetEnvelope{7.5in}{3.875in}% + \PSEnvelopeTray={/monarcenvelopetray }} +\DeclareOption{bookletenvelope}{\SetEnvelope{10.5in}{7.5in}} +\DeclareOption{personalenvelope}{\SetEnvelope{6.5in}{3.625in}} +\DeclareOption{c6envelope}{\SetEnvelope{162mm}{114mm}} +\DeclareOption{c65envelope}{\SetEnvelope{224mm}{114mm}} +\DeclareOption{c5envelope}{\SetEnvelope{229mm}{162mm}% + \PSEnvelopeTray={/162x229cenvelopetray }} +\DeclareOption{dlenvelope}{\SetEnvelope{220mm}{110mm}% + \PSEnvelopeTray={/dlenvelopetray }} +% \end{macrocode} +% +% \subsection{Labels sizes} +% +% \changes{v1.2}{1996/07/22}{Added new option: herma4625label (thanks to +% "J.P.Jansen@net.HCC.nl")} +% \changes{v1.2}{1996/09/06}{Added new option: avery5262label (thanks to +% Uri Blumenthal "uri@ibm.net")} +% \changes{v1.2}{1997/07/13}{Added new option: avery5164biglabel} +% \changes{v1.2}{1997/07/13}{Added new option: avery5163biglabel} +% +% \begin{macrocode} +\DeclareOption{avery5160label}{% + \SetLabel{2.75in}{1in}{0.5in}{0.19in}{0.12in}{3}{10}} +\DeclareOption{avery5161label}{% + \SetLabel{4.19in}{1in}{0.5in}{0.16in}{0.19in}{2}{10}} +\DeclareOption{avery5162label}{% + \SetLabel{4.19in}{1.33in}{0.83in}{0.16in}{0.19in}{2}{7}} +\DeclareOption{avery5163label}{% + \SetLabel{4.19in}{2in}{0.5in}{0.16in}{0.19in}{2}{5}} +\DeclareOption{avery5164label}{% + \SetLabel{4.19in}{3.33in}{0.5in}{0.16in}{0.19in}{2}{3}} +\DeclareOption{herma4625label}{% + \SetLabel{105mm}{42.3mm}{0mm}{5mm}{5mm}{2}{7}} +\DeclareOption{avery5262label}{% + \SetLabel{110mm}{34mm}{21mm}{4mm}{5mm}{2}{7}} +\DeclareOption{avery5163biglabel}{% + \SetBigLabel{4.19in}{2in}{0.5in}{0.16in}{0.19in}{2}{5}% + \setlength{\ToAddressTopMargin}{0.1in}}% +\DeclareOption{avery5164biglabel}{% + \SetBigLabel{4.19in}{3.33in}{0.5in}{0.16in}{0.19in}{2}{3}}% +% \end{macrocode} +% +% \subsection{Optional switches} +% +% \changes{v1.1}{1996/07/08}{Added new options: "printreturnaddress", +% "noprintreturnaddress"} +% \changes{v1.1}{1996/07/08}{Added new options: "pswait", +% "nopswait"} +% \changes{v1.2}{1997/07/13}{Added new options: "psautotray", +% "nopsautotray"} +% \changes{v1.2}{1997/07/14}{Added new options: "re", "nore"} +% All this should be evident\dots +% +% \begin{macrocode} +\DeclareOption{rotateenvelopes}{\@rotateenvelopestrue} +\DeclareOption{norotateenvelopes}{\@rotateenvelopesfalse} +\DeclareOption{centerenvelopes}{\@envelopeposition=0\relax} +\DeclareOption{leftenvelopes}{\@envelopeposition=1\relax} +\DeclareOption{rightenvelopes}{\@envelopeposition=2\relax} +\DeclareOption{customenvelopes}{\@envelopeposition=3\relax} +\DeclareOption{printbarcodes}{\@barcodestrue} +\DeclareOption{noprintbarcodes}{\@barcodesfalse\@alwaysbarcodesfalse} +\DeclareOption{alwaysbarcodes}{\@alwaysbarcodestrue\@barcodestrue} +\DeclareOption{noalwaysbarcodes}{\@alwaysbarcodesfalse} +\DeclareOption{capaddress}{\@capitalizeaddresstrue} +\DeclareOption{nocapaddress}{\@capitalizeaddressfalse} +\DeclareOption{printreturnaddress}{\@printreturnaddresstrue} +\DeclareOption{noprintreturnaddress}{\@printreturnaddressfalse} +\DeclareOption{pswait}{\@pswaittrue\@psautotrayfalse} +\DeclareOption{nopswait}{\@pswaitfalse} +\DeclareOption{psautotray}{\@psautotraytrue\@pswaitfalse} +\DeclareOption{nopsautotray}{\@psautotrayfalse} +\DeclareOption{re}{\@EL@redefine@openingtrue} +\DeclareOption{nore}{\@EL@redefine@openingfalse} +% \end{macrocode} +% +% \subsection{Unknown options} +% +% All options we did not declare above are probably the options for the +% "graphics" package; let us send them there. +% \begin{macrocode} +\DeclareOption*{\PassOptionsToPackage{\CurrentOption}{graphics}} +% \end{macrocode} +% +% \subsection{Default options}\label{sec:DefOpt} +% +% \changes{v1.1}{1996/07/08}{Fixed typo in "businessenvelope" option} +% \changes{v1.1}{1996/07/09}{Added default options: "nopswait", +% "printreturnaddress"} +% +% \begin{macrocode} +\ExecuteOptions{businessenvelope,rotateenvelopes,centerenvelopes} +\ExecuteOptions{printbarcodes,capaddress} +\ExecuteOptions{nopswait,printreturnaddress,nopsautotray,nore} +% \end{macrocode} +% +% \section{Configuration file} +% +% At this point we will look for the configuration file. This file is +% named "envlab.cfg". The options declared in this file will supersede +% the ones declared in Section~\ref{sec:DefOpt}, but will be in their +% turn be superseded by the options explicitly defined when the package +% is loaded. +% \begin{macrocode} +\InputIfFileExists{envlab.cfg}{% + \typeout{Loading configuration file envlab.cfg}}{% + \typeout{Configuration file envlab.cfg is not found}} +% \end{macrocode} +% +% Now let us discuss the structure of the configuration file. We want it +% to contain default options, and therefore to be loaded before the +% "\ProcessOptions" command. On the other hand we want it to contain +% some definitions that \emph{supersede} the ones in this package. The +% hook "\AtEndOfPackage" helps to do this: we will just delay all +% definitions until later. +% +% OK, let's construct an example of "envlab.cfg" file. The commands here +% essentially repeat Section~\ref{sec:DefOpt}, but we want to be +% foolproof\dots +% \begin{macrocode} +% +%<*cfg> +%% +%% The default options go here +%% +\ExecuteOptions{businessenvelope,rotateenvelopes,centerenvelopes} +\ExecuteOptions{printbarcodes,capaddress} +\ExecuteOptions{nopswait,printreturnaddress,nopsautotray,nore} +%% +\AtEndOfPackage{\relax % Customization goes here +} +% +%<*package> +% \end{macrocode} +% +% \section{Processing options and loading packages} +% \changes{v0.92}{1996/06/06}{Added \cs{IfFileExists} when loading packages} +% \begin{macrocode} +\ProcessOptions +\IfFileExists{graphics.sty}{% + \RequirePackage{graphics}}{% + \PackageWarning{envlab}{% + You don't have the graphics package!\MessageBreak + Probably you will not be able to print\MessageBreak + envelopes sidewise. \MessageBreak}} +% \end{macrocode} +% +% \section{Document layout} +% +% \subsection{Printer specific commands} +% \label{sec:Print} +% +% \DescribeMacro{\@beginlabelshook} +% \changes{v1.1}{1996/07/09}{Replaced \cs{@printpreamble} with +% \cs{@beginlabelshook}} +% The command "\@beginlabelshook" is called at the beginning of the +% printing of envelopes and labels. We define it to be a no-op, but it +% is possible to introduce some printer-specific commands (like paper +% change). +% \begin{macrocode} +\def\@beginlabelshook{\relax} +% \end{macrocode} +% +% \DescribeMacro{\@beginlabelpagehook} +% \changes{v1.1}{1996/07/09}{Introduced new command +% \cs{@beginlabelpagehook}} +% The command "\@beginlabelpagehook" is like "\@beginlabelshook", but is +% called at the beginning of each \emph{page} +% of envelopes and labels. +% \begin{macrocode} +\def\@beginlabelpagehook{\relax} +% \end{macrocode} +% +% \begin{macro}{\AtBeginLabels} +% \changes{v1.1}{1996/07/08}{Made \cs{AtBeginLabels} cumulative} +% \begin{macro}{\AtBeginLabelPage} +% \changes{v1.1}{1996/07/09}{Introduced \cs{AtBeginLabelPage}} +% The hooks "\AtBeginLabels" and "\AtBeginLabelPage" redefine +% "\@beginlabelshook" and "\@beginlabelpagehook". They are built like +% the standard \LaTeXe\ hooks +% "\AtBeginDocument", "\AtBeginDvi", etc. In the implementation we use the +% \emph{internal} \LaTeXe\ command "\g@addto@macro". In the current +% (June~1996) \LaTeXe\ release it is defined as: +% \DescribeMacro{\g@addto@macro} +% \begin{verbatim} +% \long\def\g@addto@macro#1#2{{% +% \toks@\expandafter{#1#2}% +% \xdef#1{\the\toks@}}} +% \end{verbatim} +% We quote this definition in case \emph{They} change Their minds\dots\ +% \begin{macrocode} +\def\AtBeginLabels{\g@addto@macro\@beginlabelshook} +\def\AtBeginLabelPage{\g@addto@macro\@beginlabelpagehook} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\PSwait} +% \changes{v1.1}{1996/07/09}{Put William Slough's code in a separate macro} +% \textsl{PostScript} printers can be switched to the manual feeding mode +% with the following code by \emph{William Slough} "". +% \begin{macrocode} +\def\PSwait{\special{ps: clear grestore @manualfeed 0 0 bop}} +% \end{macrocode} +% The author explains his code in the following way: +% \begin{quotation} +% Here is a possible explanation: +% +% The clear removes operands from the PostScript stack, which has the +% effect of reversing some actions from the *previous* bop. Unfortunately, +% it reverses other important actions too (such as font size), but the +% grestore seems to get these back. Then the desired @manualfeed, followed +% by the ``bop'' for the beginning of page. The pair of 0's are used for +% bop and are completely bogus. However, from what I could detect, 0's are +% as good as anything. The values that DVIPS provides for bop seem to be +% related to DVI page numbers. +% +% I make no guarantee about the reliability of this solution, but initial +% tests indicate it will work for my environment. +% \end{quotation} +% \end{macro} +% +% \begin{macro}{\PSautotray} +% \changes{v1.2}{1997/07/13}{Wrote new command} +% This implements the code by \emph{Uri Blumenthal} +% "". +% \begin{macrocode} +\edef\PSautotray{% + \special{ps:clear grestore + statusdict begin false setduplexmode + /manualfeed true def + \the\PSEnvelopeTray end 0 0 bop }} +% \end{macrocode} +% \end{macro} +% +% \changes{v1.1}{1996/07/08}{Added implementation of the "pswait" option} +% \changes{v1.1}{1996/07/09}{Moved \cs{PSwait} code to \cs{AtBeginLabelPage}} +% \changes{v1.1}{1996/07/15}{Moved \cs{PSwait} code to +% \cs{AtBeginLabels}} +% \changes{v1.1}{1997/07/13}{Added implementation of the "psautotray" option} +% The option "pswait" puts the "\PSwait" code in the beginning of each +% page. The option "\psautotray" puts there the "\PSautotray" code. +% \begin{macrocode} +\if@pswait + \AtBeginLabels{\PSwait}% +\else + \if@psautotray + \AtBeginLabels{\PSautotray}% + \fi +\fi +% \end{macrocode} +% +% +% \subsection{Some useful counters for labels} +% +% +% +% \DescribeMacro{\c@LabelCountCol} +% \DescribeMacro{\c@LabelCountRow} +% These counters store the position of the currently printed label: +% \begin{macrocode} +\newcounter{LabelCountCol} +\newcounter{LabelCountRow} +% \end{macrocode} +% +% +% \DescribeMacro{\c@LabelOffsetCol} +% \DescribeMacro{\c@LabelOffsetRow} +% And these counters provide the offset for the label printed on a +% partially used sheet: +% \begin{macrocode} +\newcounter{LabelOffsetCol} +\newcounter{LabelOffsetRow} +\setcounter{LabelOffsetCol}{1} +\setcounter{LabelOffsetRow}{1} +% \end{macrocode} +% +% \begin{macro}{\FirstLabel} +% \changes{v1.1}{1996/07/08}{Introduced new command \cs{FirstLabel}} +% The command "\FirstLabel"\marg{Row}\marg{Col} sets the counters +% "LabelOffsetRow" and "LabelOffsetCol". +% \begin{macrocode} +\DeclareRobustCommand{\FirstLabel}[2]{% + \setcounter{LabelOffsetRow}{#1}% + \setcounter{LabelOffsetCol}{#2}} +% \end{macrocode} +% \end{macro} +% +% +% \subsection{Fonts} +% +% +% \begin{macro}{\@toaddressfont} +% \begin{macro}{\@fromaddressfont} +% \changes{v1.1}{1996/07/08}{Fixed documentation about \cs{@fromaddressfont}} +% We want the address to be printed in \textsf{\large 12pt sans serif} +% font. The return address will be printed in 10pt normal font. +% \begin{macrocode} +\def\@toaddressfont{% + \ifcase\@ptsize \large\or\normalsize\or\small\fi% + \sffamily\selectfont} +\def\@fromaddressfont{% + \ifcase\@ptsize \normalsize\or\small\or\footnotesize\fi% + \normalfont} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \subsection{Return address} +% +% \begin{macro}{\returnaddress} +% \changes{v1.2}{1997/07/13}{Deleted check for \cs{if@envelope}} +% The standard letter class defines "\returnaddress" to be null. This +% is sensible if we are printing labels, but not so good if we are +% printing \emph{envelopes}. Therefore let us redefine it: +% \begin{macrocode} +\def\returnaddress{\fromaddress} +% \end{macrocode} +% \end{macro} +% +% \subsection{Margins, page styles, etc.} +% +% +% \begin{macro}{\startlabels} +% \changes{v1.2}{1996/09/07}{Added \cs{clearpage}} +% \changes{v1.2}{1996/09/20}{Added percent signs} +% \changes{v1.2}{1997/07/10}{Moved here calculations for +% \cs{EnvelopeLeftMargin}} +% \changes{v1.2}{1997/07/10}{Added \cs{LabelLeftMargin}} +% The command "\startlabels" is the internal command that prepares +% the paper for labels or envelopes, resets the internal counters and +% calls "\@beginlabelshook". +% \begin{macrocode} +\def\startlabels{% + \clearpage% + \pagestyle{empty}% + \setlength{\topmargin}{-1.0in}% + \if@envelope% + \addtolength{\topmargin}{\EnvelopeTopMargin}% + \else \addtolength{\topmargin}{\LabelTopMargin}% + \fi% + \setlength{\headheight}{0pt}% + \setlength{\headsep}{0pt}% + \setlength{\footskip}{0pt}% + \setlength{\textheight}{200in}% + \setlength\paperheight{\textheight}% + \global\vsize=200in\relax% + \addtolength{\textheight}{-\topmargin}% + \addtolength{\textheight}{-1.0in}% + \setlength{\oddsidemargin}{-1.0in}% + \if@envelope\relax% + \else% + \addtolength{\oddsidemargin}{\LabelLeftMargin}% + \fi% + \setlength{\evensidemargin}{\oddsidemargin}% + \setlength{\textwidth}{20in}% + \hsize=20in% + \baselineskip=0pt% + \lineskip=0pt% + \parindent=0pt% + \if@envelope +% \end{macrocode} +% +% Now we can calculate "\EnvelopeLeftMargin" +% +% \begin{macrocode} + \ifcase\the\@envelopeposition% + \setlength{\EnvelopeLeftMargin}{\paperwidth}% + \if@rotateenvelopes% + \addtolength{\EnvelopeLeftMargin}{-\EnvelopeHeight}% + \else% + \addtolength{\EnvelopeLeftMargin}{-\EnvelopeWidth}% + \fi% + \setlength{\EnvelopeLeftMargin}{0.5\EnvelopeLeftMargin}% + \or% + \setlength{\EnvelopeLeftMargin}{0pt}% + \or% + \setlength{\EnvelopeLeftMargin}{\paperwidth}% + \if@rotateenvelopes% + \addtolength{\EnvelopeLeftMargin}{-\EnvelopeHeight}% + \else% + \addtolength{\EnvelopeLeftMargin}{-\EnvelopeWidth}% + \fi% + \else% + \relax% + \fi% + \else% +% \end{macrocode} +% +% Initializing labels counters\ldots +% +% \begin{macrocode} + \setcounter{LabelCountCol}{\theLabelOffsetCol}% + \setcounter{LabelCountRow}{\theLabelOffsetRow}% + \ifnum\theLabelOffsetRow>1% + \null% + \loop \vspace*{\LabelHeight}% + \addtocounter{LabelOffsetRow}{-1} \ifnum\theLabelOffsetRow>1% + \repeat% + \fi% + \ifnum\theLabelOffsetCol>1% + \loop \hspace*{\LabelWidth}\nolinebreak% + \addtocounter{LabelOffsetCol}{-1} \ifnum\theLabelOffsetCol>1% + \repeat% + \fi% + \nopagebreak% + \fi% + \spaceskip0pt\relax% + \xspaceskip 0pt\relax% + \clubpenalty=0% + \widowpenalty=0% + \raggedbottom% + \sloppy% + \setlength\hfuzz{5in}% + \setlength\vfuzz{5in}% + \ignorespaces% + \@beginlabelshook% + \@beginlabelpagehook% + \nopagebreak}% +% \end{macrocode} +% \end{macro} +% +% \subsection{Printing of the addresses} +% +% \DescribeMacro{\PrintReturnAddress} +% This macro uses the text as an argument and prints it according to +% the conventions. +% \begin{macrocode} +\newcommand{\PrintReturnAddress}[1]{% + \vspace*{\FromAddressTopMargin} + \null\hspace{\FromAddressLeftMargin} + \parbox[t][\FromAddressHeight]{\FromAddressWidth}% + {\@fromaddressfont \lineskip=1pt + \if@printreturnaddress #1\else\relax\fi}} +% \end{macrocode} +% +% \DescribeMacro{\PrintAddress} +% This macro works like "\PrintReturnAddress", with several important +% differences: it prints barcodes if necessary \emph{and} +% capitalizes the address. +% \begin{macrocode} +\newcommand{\PrintAddress}[1]{% + \vspace*{\ToAddressTopMargin} + \leavevmode + \null\hspace*{\ToAddressLeftMargin} + \parbox[t]{\ToAddressWidth}{% + \lineskip=1pt + \if@barcodes \PrintBarCode{#1} \fi + \@toaddressfont + \if@capitalizeaddress \@make@capitalize{#1} \else #1 \fi}} +% \end{macrocode} +% +% \subsection{Label setup} +% +% \begin{macro}{\PrintLabel} +% \changes{v1.2}{1996/09/20}{Added percent signs} +% This macro prints a label in a parbox +% \begin{macrocode} +\newcommand{\PrintLabel}[1]{% + \parbox[t][\LabelHeight]{\LabelWidth}{% + \PrintAddress{#1}}} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\PrintBigLabel} +% \changes{v1.2}{1997/07/13}{Wrote new command} +% This macro makes a minipage with addresses on it, similarly to +% "\PrintEnvelope" below. +% \begin{macrocode} +\newcommand{\PrintBigLabel}[2]{% + \begin{minipage}[t][\LabelHeight]{\LabelWidth}% + \baselineskip=0pt% + \lineskip=0pt% + \parindent=0pt% + \begin{center}% + \PrintReturnAddress{#1}\\% + \rule{\ToAddressWidth}{0.1pt}% + \PrintAddress{#2}% + \end{center}% + \end{minipage}} +% \end{macrocode} +% +% +% \subsection{Envelope setup} +% +% Labels include one box per label, so their setup is simple. The +% situation with envelopes is different: they contain several boxes, and +% could be rotated, centered, etc. +% +% \begin{macro}{\PrintEnvelope} +% \changes{v1.2}{1996/09/20}{Added percent signs} +% This macro makes a minipage with addresses on it. +% \begin{macrocode} +\newcommand{\PrintEnvelope}[2]{% + \begin{minipage}[t][\EnvelopeHeight]{\EnvelopeWidth}% + \baselineskip=0pt% + \lineskip=0pt% + \parindent=0pt% + \PrintReturnAddress{#1}\\% + \begin{center}% + \PrintAddress{#2}% + \end{center}% + \end{minipage}} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\@PrintEnvelope} +% The following macro checks for rotation: +% \begin{macrocode} +\newcommand{\@PrintEnvelope}[2]{% + \if@rotateenvelopes\rotatebox{90}{\PrintEnvelope{#1}{#2}}% + \else\PrintEnvelope{#1}{#2}% + \fi} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \section{Printing of envelopes and labels} +% +% \subsection{Main Command} +% +% \begin{macro}{\mlabel} +% Now we are prepared to print actual envelopes and labels. It is done by +% the "\mlabel" command. It has two forms: for labels and envelopes. +% \begin{macrocode} +\renewcommand{\mlabel}[2]{\ignorespaces% + \spaceskip 0pt\relax% + \xspaceskip 0pt\relax% +% \end{macrocode} +% +% \subsection{Printing of one envelope} +% \changes{v1.1}{1996/07/09}{Put \cs{@beginlabelpagehook} in the envelope +% printing} +% \begin{macrocode} + \if@envelope% + \leavevmode% + \hspace*{\EnvelopeLeftMargin}% + \@PrintEnvelope{#1}{#2}% + \clearpage% + \@beginlabelpagehook% +% \end{macrocode} +% \subsection{Printing of one label} +% \changes{v1.1}{1996/07/09}{Put \cs{@beginlabelpagehook} in the label +% printing} +% \changes{v1.2}{1997/07/14}{Added printing of big labels} +% \begin{macrocode} + \else% + \ignorespaces% + \ifnum\theLabelCountCol>\theLabelMaxCol% + \\\nopagebreak% + \stepcounter{LabelCountRow}% + \setcounter{LabelCountCol}{1}% + \fi% + \ifnum\theLabelCountRow>\theLabelMaxRow% + \vfill\eject\@beginlabelpagehook% + \setcounter{LabelCountRow}{1}% + \setcounter{LabelCountCol}{1}% + \fi% + \if@biglabel% + \PrintBigLabel{#1}{#2}% + \else% + \PrintLabel{#2}% + \fi% + \ignorespaces\nolinebreak% + \stepcounter{LabelCountCol}% + \fi}% +% \end{macrocode} +% \end{macro} +% +% \subsection{Printing of return labels} +% +% We print only mailing addresses on labels. The user is supposed to have +% preprinted return labels. Here we describe a utility for printing them. +% This utility should be used in a separate document. +% +% \DescribeMacro{\@numreturnlabels} +% The counter "\@numreturnlabels" stores the number of return labels to +% be printed. Note that it is a \TeX\ counter, not a \LaTeX\ one. +% \begin{macrocode} +\newcount\@numreturnlabels +% \end{macrocode} +% +% \DescribeMacro{\printreturnlabels} +% This macro has two parameters: the number of labels to be printed and +% the text that is printed. It is the same on all labels. +% \begin{macrocode} +\newcommand{\printreturnlabels}[2]{% + \@numreturnlabels=#1 + \def\@toaddressfont{\@fromaddressfont} + \@capitalizeaddressfalse + \@barcodesfalse + \startlabels + \loop \mlabel{\relax}{#2} \advance\@numreturnlabels by -1 + \ifnum\@numreturnlabels>0\repeat} +% \end{macrocode} +% +% \section{Barcodes} +% +% \subsection{Main command} +% +% The USPS Postnet codes are printed accordingly to the specifications +% Ref.~\cite{Pub25}. The scanning algorithm +% is stolen from David Carlisle's \textsf{enumerate} package~\cite{Enum}. +% +% \DescribeMacro{\PrintBarCode} +% First, we extract barcodes by the command "\@extractbarcode". Then +% we print them by "\@printbarcode". +% \begin{macrocode} +\newcommand{\PrintBarCode}[1]{% + \@extractbarcode{#1} + \@printbarcode} +% \end{macrocode} +% +% \subsection{Extraction of barcodes}\label{sec:Extract} +% \changes{v1.2}{1996/07/10}{Deleted \cs{global} from zipcode +% extracting commands} +% We define zipcode as a sequence of digits (0--9) that: +% \begin{itemize} +% \item Has no characters other than digits and dashes (-) inside it +% \item Has no bracketed groups inside it and is not bracketed itself +% \item Is the last in the address field unless "\if@alwaysbarcodes=true" +% \end{itemize} +% +% We print this sequence plus the \emph{control character}. +% The latter is defined as minus sum of digits of the +% zip code +% modulo 10 (that is, the complement of the sum of digits to a +% multiple of 10). +% +% First, some internal registers. +% \DescribeMacro{\@zipcode} +% \DescribeMacro{\@zipcodesum} +% \DescribeMacro{\@zipcodefound} +% The token list "\@zipcode" contains barcode found so far. The register +% "\@zipcodesum" first contains the sum of digits of the barcode, and +% then the control character. The +% switch "\@zipcodefound" shows whether we found zip code so far. +% \begin{macrocode} +\newtoks\@zipcode +\newcount\@zipcodesum +\newif\if@zipcodefound +% \end{macrocode} +% +% +% +% There are two modes for gobbling tokens: +% \begin{enumerate}[{State} A:] +% \item We are outside a potential zipcode sequence +% ("\if@zipcodefound=false")\label{state:notfound} +% \item We are inside a potential zipcode sequence +% ("\if@zipcodefound=true")\label{state:found} +% \end{enumerate} +% +% \begin{itemize} +% +% \item \DescribeMacro{\@endaddress} \DescribeMacro{\@finishzipcode} +% If we meet in any state the special token "\@endaddress", we +% gobble it and finish the loop. +% \begin{macrocode} +\long\def\@finishzipcode#1{} +% \end{macrocode} +% +% \item \DescribeMacro{\@firstzipcode} If we meet a number (0--9) in +% state~\ref{state:notfound}, we initialize registers, process the +% token and go to state~\ref{state:found} +% \begin{macrocode} +\long\def\@firstzipcode#1{% + \@zipcode{#1} + \@zipcodesum=#1\relax + \@zipcodefoundtrue + \@zipcodeloop} +% \end{macrocode} +% +% \item \DescribeMacro{\@continuezipcode} If we meet a number (0--9) +% in state~\ref{state:found}, we just process it. +% \begin{macrocode} +\long\def\@continuezipcode#1{% + \@zipcode=\expandafter{\the\@zipcode#1} + \advance\@zipcodesum by #1 + \@zipcodeloop} +% \end{macrocode} +% +% \item \DescribeMacro{\@dashzipcode} If we meet a dash in +% state~\ref{state:found}, we gobble it. +% \begin{macrocode} +\long\def\@dashzipcode#1{\@zipcodeloop} +% \end{macrocode} +% +% \item \DescribeMacro{\@spacezipcode} If we meet a space in any +% state, we gobble it and go to the state~\ref{state:notfound}. The +% trick is from Carlisle's \textsf{enumerate} package. +% \begin{macrocode} +\def\@spacezipcode{% + \@zipcodefoundfalse + \afterassignment\@zipcodeloop\let\EL@temp= } +% \end{macrocode} +% +% \item \DescribeMacro{\@abortzipcode} If we meet anything else in any +% mode, we gobble it and go to state~\ref{state:notfound} +% \begin{macrocode} +\long\def\@abortzipcode#1{% + \@zipcodefoundfalse + \@zipcodeloop} +% \end{macrocode} +% +% \end{itemize} +% +% +% \DescribeMacro{\@zipcodeloop} +% \DescribeMacro{\EL@temp} +% \changes{v1.2}{1997/07/14}{Changed \cs{@temp} to \cs{EL@temp} to +% avoid clashes with amsmath} +% This macro is simple. We just put the next token into "\EL@temp" and +% process it through "\@zipcodeloop@". +% \begin{macrocode} +\def\@zipcodeloop{\futurelet\EL@temp\@zipcodeloop@} +% \end{macrocode} +% +% \DescribeMacro{\@zipcodeloop@} +% \DescribeMacro{\EL@tempa} +% \changes{v1.2}{1997/07/14}{Changed \cs{@tempa} to \cs{EL@tempa} to +% avoid clashes with amsmath} +% This macro performs actual processing\dots We put the command +% that gobbles the next token into "\EL@tempa" +% \begin{macrocode} +\def\@zipcodeloop@{% + \ifx \@endaddress\EL@temp \def\EL@tempa{\@finishzipcode} \else + \ifx 0\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 1\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 2\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 3\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 4\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 5\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 6\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 7\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 8\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 9\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx -\EL@temp \if@zipcodefound \def\EL@tempa{\@dashzipcode} + \else \def\EL@tempa{\@abortzipcode} \fi \else + \ifx \@sptoken\EL@temp \def\EL@tempa{\@spacezipcode} \else + \def\EL@tempa{\@abortzipcode} + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi + \EL@tempa} +% \end{macrocode} +% +% +% \DescribeMacro{\@extractbarcode} +% The command "\@extractbarcode" puts barcode into the "\@zipcode", +% and calculates the control character (10 minus sum of the digits +% of the barcode). +% \begin{macrocode} +\long\def\@extractbarcode#1{% + \@zipcodefoundfalse + \@zipcodeloop#1\@endaddress + \if@alwaysbarcodes \@zipcodefoundtrue \fi + \if@zipcodefound + \ifnum\the\@zipcodesum>0 + \loop \advance \@zipcodesum by -10 \ifnum\the\@zipcodesum>0 + \repeat + \fi + \multiply\@zipcodesum by -1 + \fi} +% \end{macrocode} +% +% \subsection{Printing barcodes} +% +% \DescribeMacro{\@barcodewidth} +% \DescribeMacro{\@barcodeLheight} +% \DescribeMacro{\@barcodeSheight} +% \DescribeMacro{\@barcodeskip} +% First, some lengths. ``L'' and ``S'' below refer to ``long'' and +% ``short'' bars correspondingly. +% \begin{macrocode} +\newlength{\@barcodewidth} +\newlength{\@barcodeLheight} +\newlength{\@barcodeSheight} +\newlength{\@barcodeskip} +\setlength{\@barcodewidth}{0.020in} +\setlength{\@barcodeLheight}{0.125in} +\setlength{\@barcodeSheight}{0.050in} +\setlength{\@barcodeskip}{0.026in} +% \end{macrocode} +% +% \DescribeMacro{\@barL} +% \DescribeMacro{\@barS} +% The following macros print long and short bars. +% \begin{macrocode} +\DeclareRobustCommand{\@barL}{% + \rule{\@barcodewidth}{\@barcodeLheight}\hspace{\@barcodeskip}} +\DeclareRobustCommand{\@barS}{% + \rule{\@barcodewidth}{\@barcodeSheight}\hspace{\@barcodeskip}} +% \end{macrocode} +% +% \DescribeMacro{\@printonezip} +% \DescribeMacro{\@printbarcode} +% The scanning of "\@zipcode" is simpler than the scanning of the address: +% the only tokens we can meet are digits. Well, we will add an end marking +% token to the list. Let it be the letter ``S'' (from ``Stop''). +% \begin{macrocode} +\def\@printonezip#1{% + \ifx1#1\@barS\@barS\@barS\@barL\@barL\else + \ifx2#1\@barS\@barS\@barL\@barS\@barL\else + \ifx3#1\@barS\@barS\@barL\@barL\@barS\else + \ifx4#1\@barS\@barL\@barS\@barS\@barL\else + \ifx5#1\@barS\@barL\@barS\@barL\@barS\else + \ifx6#1\@barS\@barL\@barL\@barS\@barS\else + \ifx7#1\@barL\@barS\@barS\@barS\@barL\else + \ifx8#1\@barL\@barS\@barS\@barL\@barS\else + \ifx9#1\@barL\@barS\@barL\@barS\@barS\else + \ifx0#1\@barL\@barL\@barS\@barS\@barS\else + \ifx S#1\def\EL@tempa{\relax}% + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi% + \EL@tempa} +\def\@printbarcode{% + \if@zipcodefound + \mbox{% + \@barL% + \def\EL@tempa{\@printonezip}% + \expandafter\EL@tempa\the\@zipcode S% + \def\EL@tempa{\@printonezip}% + \expandafter\EL@tempa\the\@zipcodesum S% + \@barL} + \\[1ex] + \fi} +% \end{macrocode} +% +% +% +% \section{Capitalization} +% +% +% \changes{v1.2}{1996/07/10}{Deleted \cs{global} from capitalization commands} +% +% +% +% These macros process the address (actually, any string) according to the +% USPS recommendations. Specifically, they: +% \begin{itemize} +% \item Strip dots (.) and commas (,) from the address unless they are +% enclosed in brackets +% \item Make all letters uppercase +% \item Add 1pt space between letters +% \item Add 1em space between words +% \end{itemize} +% An interesting question is whether we should de-accent accented +% letters. USPS says nothing about it. In the present version accents +% are \emph{not} stripped. However due to the scanning algorithm they +% should be enclosed by brackets, like this: +% "{\u S}andor {\c C}edi". +% +% +% +% \DescribeMacro{\@addr@cap} +% We store the capitalized address in the token list "\@addr@cap". +% \begin{macrocode} +\newtoks\@addr@cap +% \end{macrocode} +% +% The following macros process the tokens one by one. +% +% \DescribeMacro{\@finishaddrcap} +% If we meet the special token "\@endaddress", we gobble it and stop. +% \begin{macrocode} +\long\def\@finishaddrcap#1{} +% \end{macrocode} +% +% \DescribeMacro{\@dotcommaaddrcap} +% If we meet comma or dot, we gobble it and do \emph{not} stop. This macro +% is also useful for gobbling \LaTeXe\ \textsf{letter} commands like +% "\voidb@x" and "\unhbox". +% \begin{macrocode} +\long\def\@dotcommaaddrcap#1{% + \@addrcaploop} +% \end{macrocode} +% +% \DescribeMacro{\@newlineaddrcap} +% If we meet "\\", we add it to the list +% \begin{macrocode} +\long\def\@newlineaddrcap#1{% + \@addr@cap=\expandafter{\the\@addr@cap #1} + \@addrcaploop} +% \end{macrocode} +% +% \DescribeMacro{\@bgroupaddrcap} +% If we meet "\bgroup", we add it to the list the complete group (uppercase) +% \begin{macrocode} +\long\def\@bgroupaddrcap#1{% + \@addr@cap=\expandafter{\the\@addr@cap {\MakeUppercase{#1}}} + \@addrcaploop} +% \end{macrocode} +% +% \DescribeMacro{\@spaceaddrcap} +% If we meet a space we gobble it (oh-oh) and add it to the list. +% \begin{macrocode} +\def\@spaceaddrcap{% + \@addr@cap=\expandafter{\the\@addr@cap\hspace{0.6em}} + \afterassignment\@addrcaploop\let\EL@temp= } +% \end{macrocode} +% +% \DescribeMacro{\@otheraddrcap} +% And if we meet anything else, we make it uppercase and add to the +% list +% \begin{macrocode} +\def\@otheraddrcap#1{% + \@addr@cap=\expandafter{\the\@addr@cap% + \MakeUppercase{#1}\kern1pt\relax} + \@addrcaploop} +% \end{macrocode} +% +% +% \DescribeMacro{\@addrcaploop} +% This macro is simple. We just put the next token into "\EL@temp" and +% process it through "\@addrcaploop@". +% \begin{macrocode} +\def\@addrcaploop{\futurelet\EL@temp\@addrcaploop@} +% \end{macrocode} +% +% \DescribeMacro{\@addrcaploop@} +% This macro performs actual processing\dots +% \begin{macrocode} +\def\@addrcaploop@{% + \ifx \@endaddress\EL@temp \def\EL@tempa{\@finishaddrcap} \else + \ifx .\EL@temp \def\EL@tempa{\@dotcommaaddrcap} \else + \ifx ,\EL@temp \def\EL@tempa{\@dotcommaaddrcap} \else + \ifx \voidb@x\EL@temp \def\EL@tempa{\@dotcommaaddrcap} \else + \ifx \unhbox\EL@temp \def\EL@tempa{\@dotcommaaddrcap} \else + \ifx \\\EL@temp \def\EL@tempa{\@newlineaddrcap} \else + \ifx \bgroup\EL@temp \def\EL@tempa{\@bgroupaddrcap} \else + \ifx \@sptoken\EL@temp \def\EL@tempa{\@spaceaddrcap} \else + \def\EL@tempa{\@otheraddrcap} + \fi\fi\fi\fi\fi\fi\fi\fi + \EL@tempa} +% \end{macrocode} +% +% \DescribeMacro{\@make@capitalize} +% \begin{macrocode} +\long\def\@make@capitalize#1{% + \@addr@cap={\relax} + \@addrcaploop#1\@endaddress + \the\@addr@cap} +% \end{macrocode} +% +% +% \section{Games with \texttt{.aux} file} +% +% The commands described in this section write something to the +% |.aux| file, and thus change the way \EL\ treats the labels and +% envelopes. Since the action is delayed till the |.aux| file is +% processed, these commands affect only the labels automatically +% extracted from the |letter| environment, and do not affect the +% labels explicitly defined by the |\mlabel| commands in the main +% file. +% +% +% \changes{v1.2}{1996/09/07}{Added \cs{@@mlabel}} +% \DescribeMacro{\@@mlabel} +% The macro |\@@mlabel| stores the status of the |\@mlabel| as +% determined by |\makelabels|. It is a no-op at the start. +% If |\makelabels| redefines |\@mlabel|, we catch it through the +% |\AtEndDocument| hook. Note that since |\makelabel| is allowed +% only in the preamble, we are not in danger of redefining commands too +% early. +% \begin{macrocode} +\let\@@mlabel=\@gobbletwo +\AtEndDocument{\let\@@mlabel=\@mlabel} +% \end{macrocode} +% +% +% The next four commands redefine |\@mlabel| to suppress or resume +% printing mailing labels. +% +% \begin{macro}{\suppresslabels} +% \changes{v1.2}{1996/09/06}{Wrote new command} +% This command suppress printing labels and envelopes until it is +% resumed by |\resumelabels| or similar commands. +% \begin{macrocode} +\def\suppresslabels{\if@filesw\immediate\write\@auxout{% + \string\@suppresslabels}\fi} +% \end{macrocode} +% +% \begin{macro}{\@suppresslabels} +% \changes{v1.2}{1996/09/07}{Deleted the \cs{AtBeginDocument} hook} +% This is the internal command that performs the actual +% processing. +% \begin{macrocode} +\def\@suppresslabels{\let\@mlabel=\@gobbletwo} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\resumelabels} +% \changes{v1.2}{1996/09/06}{Wrote new command} +% \begin{macro}{\@resumelabels} +% \changes{v1.2}{1996/09/07}{Changed \cs{mlabel} to \cs{@@mlabel} and +% deleted the \cs{AtBeginDocument} hook} +% These commands resume printing labels and envelopes if it was +% suppressed by |\suppresslabels| or similar commands. +% \begin{macrocode} +\def\resumelabels{\if@filesw\immediate\write\@auxout{% + \string\@resumelabels}\fi} +\def\@resumelabels{\let\@mlabel=\@@mlabel} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% +% \begin{macro}{\suppressonelabel} +% \changes{v1.2}{1996/06/09}{Wrote new command} +% \begin{macro}{\@suppressonelabel} +% \changes{v1.2}{1996/09/07}{Deleted the \cs{AtBeginDocument} hook} +% \begin{macro}{\@old@mlabel} +% These commands suppress printing of one label or envelope. +% The macro |\@old@mlabel| is used to store the +% system state. +% \begin{macrocode} +\def\suppressonelabel{\if@filesw\immediate\write\@auxout{% + \string\@suppressonelabel}\fi} +\def\@suppressonelabel{\let\@old@mlabel=\@mlabel% + \def\@mlabel{% + \let\@mlabel=\@old@mlabel% + \@gobbletwo}} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\printonelabel} +% \changes{v1.2}{1996/06/09}{Wrote new command} +% \begin{macro}{\@printonelabel} +% \changes{v1.2}{1996/09/07}{Changed \cs{mlabel} to \cs{@@mlabel} and +% deleted the \cs{AtBeginDocument} hook} +% These commands resume printing for one label or envelope +% The macro |\@old@mlabel| is used to store the +% system state. +% \begin{macrocode} +\def\printonelabel{\if@filesw\immediate\write\@auxout{% + \string\@printonelabel}\fi} +\def\@printonelabel{\let\@old@mlabel=\@mlabel% + \def\@mlabel{% + \let\@mlabel=\@old@mlabel% + \@@mlabel}} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% +% \begin{macro}{\ChangeEnvelope} +% \changes{v1.2}{1996/09/07}{Wrote new command} +% \begin{macro}{\@ChangeEnvelope} +% \begin{macro}{\@ChangeEnvelopeStar} +% This macro writes |\@SetEnvelope| to the |.aux| file. It has +% two forms: starred and and unstarred. In the unstarred mode it also +% writes |\@startlabels| to the |.aux| file. In the unstarred form it +% does not. +% Since we want to treat \emph{both} stars and optional arguments, we +% introduce two internal commands that can be invoked by the main +% macro. +% \begin{macrocode} +\def\ChangeEnvelope{\@ifstar{\@ChangeEnvelopeStar}{\@ChangeEnvelope}} +\newcommand\@ChangeEnvelopeStar[3][0pt]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetEnvelope[#1]{#2}{#3}}% + \fi} +\newcommand\@ChangeEnvelope[3][0pt]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetEnvelope[#1]{#2}{#3}} + \immediate\write\@auxout{\string\@startlabels} + \fi} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\@SetEnvelope} +% We define this command as no-op at beginning, and then redefine it +% before reading |.aux| file. +% \begin{macrocode} +\def\@SetEnvelope[#1]#2#3{} +\AtEndDocument{\let\@SetEnvelope=\SetEnvelope} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\ChangeLabel} +% \changes{v1.2}{1997/07/11}{Wrote new command} +% \begin{macro}{\@ChangeLabel} +% \begin{macro}{\@ChangeLabelStar} +% This macro writes |\@SetLabel| to the |.aux| file. It has +% two forms: starred and and unstarred. In the unstarred mode it also +% writes |\@startlabels| to the |.aux| file. In the unstarred form it +% does not. +% Since we want to treat \emph{both} stars and optional arguments, we +% introduce two internal commands that can be invoked by the main +% macro. +% \begin{macrocode} +\def\ChangeLabel{\@ifstar{\@ChangeLabelStar}{\@ChangeLabel}} +\newcommand\@ChangeLabelStar[7]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetLabel{#1}{#2}{#3}{#4}{#5}{#6}{#7}}% + \fi} +\newcommand\@ChangeLabel[7]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetLabel{#1}{#2}{#3}{#4}{#5}{#6}{#7}} + \immediate\write\@auxout{\string\@startlabels} + \fi} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\@SetLabel} +% We define this command as no-op at beginning, and then redefine it +% before reading |.aux| file. +% \begin{macrocode} +\def\@SetLabel#1#2#3#4#5#6#7{} +\AtEndDocument{\let\@SetLabel=\SetLabel} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\ChangeBigLabel} +% \changes{v1.2}{1997/07/13}{Wrote new command} +% \begin{macro}{\@ChangeBigLabel} +% \begin{macro}{\@ChangeBigLabelStar} +% This macro writes |\@SetBigLabel| to the |.aux| file. It has +% two forms: starred and and unstarred. In the unstarred mode it also +% writes |\@startlabels| to the |.aux| file. In the unstarred form it +% does not. +% Since we want to treat \emph{both} stars and optional arguments, we +% introduce two internal commands that can be invoked by the main +% macro. +% \begin{macrocode} +\def\ChangeBigLabel{\@ifstar{\@ChangeBigLabelStar}{\@ChangeBigLabel}} +\newcommand\@ChangeBigLabelStar[7]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetBigLabel{#1}{#2}{#3}{#4}{#5}{#6}{#7}}% + \fi} +\newcommand\@ChangeBigLabel[7]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetBigLabel{#1}{#2}{#3}{#4}{#5}{#6}{#7}} + \immediate\write\@auxout{\string\@startlabels} + \fi} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\@SetLabel} +% We define this command as no-op at beginning, and then redefine it +% before reading |.aux| file. +% \begin{macrocode} +\def\@SetBigLabel#1#2#3#4#5#6#7{} +\AtEndDocument{\let\@SetBigLabel=\SetBigLabel} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \section{Reimplementation of the \cs{opening} command} +% \DescribeMacro{\re} +% Some people like to put below the address information like +% \begin{quote} +% Re: our recent talk +% \end{quote} +% A way to do this is to include it in the address like this: +% \begin{verbatim} +% \begin{letter}{% +% Dr.~Austin Tankel\\ +% Some University\\ +% Anytown, Pa 12345\\[1ex] +% Re: Our recent talk} +% \opening{Dear Austin:} +% \end{verbatim} +% However, this additional info will be put in the mailing label, +% which is wrong. Here we describe a macro that works like this: +% \begin{verbatim} +% \begin{letter}{% +% Dr.~Austin Tankel\\ +% Some University\\ +% Anytown, Pa 12345} +% \re{Our recent talk} +% \opening{Dear Austin:} +% \end{verbatim} +% +% +% Now, the implementation. +% First, lets us check whether the option "re" is chosen (otherwise we +% don't bother to redefine the commands): +% \begin{macrocode} +\if@EL@redefine@opening +% \end{macrocode} +% +% \begin{macro}{\re} +% \changes{v1.2}{1997/07/14}{Wrote new command} +% \begin{macro}{\recontentents} +% \changes{v1.2}{1997/07/14}{Wrote new command} +% The command "\re" just defines "\recontents". Also, we initialize +% "\recontents" to be initially empty +% \begin{macrocode} + \newcommand*{\re}[1]{\def\recontents{#1}}% +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% +% \begin{macro}{\ReName} +% \changes{v1.2}{1997/07/14}{Wrote new command} +% By default it is just plain style ``Re: '' (note the space!) +% \begin{macrocode} + \def\ReName{Re: }% +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\opening} +% \changes{v1.2}{1997/07/14}{Reimplemented standard command +% \cs{opening}} +% Now we redefine the standard "\opening" command to include the "\re" +% info. Here is the quote from the standard "letter" +% class~\cite{letter}: +% \begin{quotation} +% Text is begun with the |\opening| command, whose argument +% generates the salutation, as in +%\begin{verbatim} +% \opening{Dear Henry,} +%\end{verbatim} +% This should produce everything up to and including the +% `Dear Henry,' and a |\par| command that follows. +% Since there's a |\vfil| at the bottom of every page, +% it can add vertical fill to position a short letter. +% It should use the following commands: +% \begin{itemize} +% \item |\toname| : name part of `to' address. +% Will be one line long. +% \item |\toaddress| : address part of `to' address. +% The lines separated by |\\|. +% \item |\fromname| : name of sender. +% \item |\fromaddress| : argument of current |\address| +% declaration-- null if none. Should use standard institutional +% address if null. +% \item |\fromlocation| : argument of current |\location| +% declaration--null if none. +% \item |\telephonenum| : argument of current |\telephone| +% declaration--null if none. +% \end{itemize} +% \end{quotation} +% We just "\ReName" and "\recontents" here\ldots +% \begin{macrocode} + \renewcommand*{\opening}[1]{\ifx\@empty\fromaddress + \thispagestyle{firstpage}% + {\raggedleft\@date\par}% + \else % home address + \thispagestyle{empty}% + {\raggedleft\begin{tabular}{l}\ignorespaces + \fromaddress \\*[2\parskip]% + \@date \end{tabular}\par}% + \fi + \vspace{2\parskip}% + {\raggedright \toname \\ \toaddress \par}% + \ifx\@empty\recontents\relax + \else + {\raggedright \ReName \recontents \par}% + \fi + \vspace{2\parskip}% + #1\par\nobreak}% +% \end{macrocode} +% \end{macro} +% +% Now we close \cs{if@EL@redefine@opening}: +% \begin{macrocode} +\fi +% \end{macrocode} +% +% And the last line: +% \begin{macrocode} +% +% \end{macrocode} +% +% \Finale +% +% \clearpage +% \addcontentsline{toc}{section}{\protect\refname} +% \begin{thebibliography}{1} +% \bibitem{Enum} +% David Carlisle. +% \newblock {\em The \textsf{enumerate} package}. +% \newblock {CTAN}, v2.02 edition, January 1994. +% \bibitem{letter} +% Leslie Lamport, Frank Mittelbach, and Rainer Sch{\"o}pf. +% \newblock Standard letter document class for {\LaTeX} version 2e. +% \newblock CTAN, 199c. +% \bibitem{Pub25} +% USPS. +% \newblock {\em Designing Business Letter Mail (Pub 25)}, August 1995. +% \end{thebibliography} +% +% \clearpage +% \addcontentsline{toc}{section}{Change History} +% \PrintChanges +% +% \clearpage +% \addcontentsline{toc}{section}{Index} +% \PrintIndex +% +\endinput + diff --git a/envlab.ins b/envlab.ins new file mode 100644 index 0000000..68e4ced --- /dev/null +++ b/envlab.ins @@ -0,0 +1,25 @@ +\def\batchfile{envlab.ins} +\input docstrip +\keepsilent + + +\declarepreamble\cfg + +You are allowed and encouraged to modify THIS file. + +The first part of this file contains default options for your site. +The second part (inside AtEndOfPackage declaration) should contain +customization commands specific to your site. + +Good luck + +\endpreamble + +\generate{% + \file{envlab.drv}{\from{envlab.dtx}{driver}} + \file{envlab.sty}{\from{envlab.dtx}{package}} + \usepreamble\empty\usepreamble\cfg\file{envlab.cfg}{\from{envlab.dtx}{cfg}}} + + + + diff --git a/envlab.sty b/envlab.sty new file mode 100644 index 0000000..9d63b5a --- /dev/null +++ b/envlab.sty @@ -0,0 +1,617 @@ +%% +%% This is file `envlab.sty', +%% generated with the docstrip utility. +%% +%% The original source files were: +%% +%% envlab.dtx (with options: `package') +%% +%% IMPORTANT NOTICE: +%% +%% For the copyright see the source file. +%% +%% Any modified versions of this file must be renamed +%% with new filenames distinct from envlab.sty. +%% +%% For distribution of the original source see the terms +%% for copying and modification in the file envlab.dtx. +%% +%% This generated file may be distributed as long as the +%% original source files, as listed above, are part of the +%% same distribution. (The sources need not necessarily be +%% in the same archive or directory.) +\ProvidesPackage{envlab} +[1997/07/16 v1.2 Envelopes and Labels] +%% +%% Copyright Boris Veytsman 1996, 1997 +%% +%% +%% \CharacterTable +%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z +%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z +%% Digits \0\1\2\3\4\5\6\7\8\9 +%% Exclamation \! Double quote \" Hash (number) \# +%% Dollar \$ Percent \% Ampersand \& +%% Acute accent \' Left paren \( Right paren \) +%% Asterisk \* Plus \+ Comma \, +%% Minus \- Point \. Solidus \/ +%% Colon \: Semicolon \; Less than \< +%% Equals \= Greater than \> Question mark \? +%% Commercial at \@ Left bracket \[ Backslash \\ +%% Right bracket \] Circumflex \^ Underscore \_ +%% Grave accent \` Left brace \{ Vertical bar \| +%% Right brace \} Tilde \~} +%% \changes{v1.2}{1996/07/16}{Updated User Guide} +\NeedsTeXFormat{LaTeX2e} +\def\envlab@oops{% + \PackageError{envlab}% + {Envlab is used outside of \MessageBreak% + a letter-compatible documentclass}% + {You are trying to use Envelopes & Labels\MessageBreak% + package, but your documentclass does not\MessageBreak% + understand address formatting commands.\MessageBreak% + Try standard document class letter\MessageBreak}} +\def\envlab@ok{% + \PackageInfo{envlab}% + {Envelopes & Labels package: found makelabels...\MessageBreak% + Seems everything is OK. Good luck.}} +\@ifundefined{makelabels}{\envlab@oops}{\envlab@ok} +\newif\if@envelope +\@envelopetrue +\newif\if@biglabel +\@biglabelfalse +\newif\if@rotateenvelopes +\@rotateenvelopestrue +\newif\if@printreturnaddress +\@printreturnaddresstrue +\newcount\@envelopeposition +\@envelopeposition=0\relax +\newif\if@pswait +\@pswaitfalse +\newif\if@psautotray +\@psautotrayfalse +\newtoks\PSEnvelopeTray +\PSEnvelopeTray={/otherenvelopetray } +\newif\if@barcodes +\newif\if@alwaysbarcodes +\@barcodestrue +\@alwaysbarcodesfalse +\newif\if@EL@redefine@opening +\@EL@redefine@openingfalse +\newif\if@capitalizeaddress +\@capitalizeaddresstrue +\newlength{\EnvelopeWidth} +\newlength{\EnvelopeHeight} +\newlength{\EnvelopeTopMargin} +\newlength{\EnvelopeLeftMargin} +\setlength{\EnvelopeLeftMargin}{0pt} +\newlength{\LabelWidth} +\newlength{\LabelHeight} +\newlength{\LabelTopMargin} +\newlength{\LabelLeftMargin} +\newlength{\LabelRightMargin} +\newcounter{LabelMaxCol} +\newcounter{LabelMaxRow} +\newlength{\FromAddressTopMargin} +\newlength{\FromAddressLeftMargin} +\newlength{\FromAddressHeight} +\newlength{\FromAddressWidth} +\newlength{\ToAddressTopMargin} +\newlength{\ToAddressLeftMargin} +\newlength{\ToAddressWidth} +\DeclareRobustCommand{\SetEnvelope}[3][0pt]{% + \@envelopetrue% + \@biglabelfalse% + \setlength{\EnvelopeTopMargin}{#1}% + \setlength{\EnvelopeWidth}{#2}% + \setlength{\EnvelopeHeight}{#3}% + \setlength{\FromAddressTopMargin}{0.5in}% + \setlength{\FromAddressLeftMargin}{0.5in}% + \setlength{\FromAddressHeight}{0.33\EnvelopeHeight}% + \setlength{\FromAddressWidth}{0.5\EnvelopeWidth}% + \setlength{\ToAddressTopMargin}{0.5in}% + \setlength{\ToAddressLeftMargin}{0.5in}% + \setlength{\ToAddressWidth}{3in}} +\DeclareRobustCommand{\SetLabel}[7]{% + \@envelopefalse% + \@biglabelfalse% + \setlength{\LabelWidth}{#1}% + \setlength{\LabelHeight}{#2}% + \setlength{\LabelTopMargin}{#3}% + \setlength{\LabelLeftMargin}{#4}% + \setlength{\LabelRightMargin}{#5}% + \setcounter{LabelMaxCol}{#6}% + \setcounter{LabelMaxRow}{#7}% + \setlength{\ToAddressTopMargin}{0.1in}% + \setlength{\ToAddressLeftMargin}{0.2in}% + \setlength{\ToAddressWidth}{\LabelWidth}% + \addtolength{\ToAddressWidth}{-\ToAddressLeftMargin}% + \addtolength{\ToAddressWidth}{-\LabelRightMargin}} +\DeclareRobustCommand{\SetBigLabel}[7]{% + \@envelopefalse% + \@biglabeltrue% + \setlength{\LabelWidth}{#1}% + \setlength{\LabelHeight}{#2}% + \setlength{\LabelTopMargin}{#3}% + \setlength{\LabelLeftMargin}{#4}% + \setlength{\LabelRightMargin}{#5}% + \setcounter{LabelMaxCol}{#6}% + \setcounter{LabelMaxRow}{#7}% + \setlength{\FromAddressTopMargin}{0.0in}% + \setlength{\FromAddressLeftMargin}{0.5in}% + \setlength{\FromAddressHeight}{0.33\LabelHeight}% + \setlength{\ToAddressTopMargin}{0.1in}% + \setlength{\ToAddressLeftMargin}{0.5in}% + \setlength{\ToAddressWidth}{\LabelWidth}% + \addtolength{\ToAddressWidth}{-\ToAddressLeftMargin}% + \addtolength{\ToAddressWidth}{-\LabelRightMargin}% + \setlength{\FromAddressWidth}{\ToAddressWidth}} +\DeclareOption{businessenvelope}{\SetEnvelope{9.5in}{4.125in}% + \PSEnvelopeTray={/com10envelopetray }} +\DeclareOption{executiveenvelope}{\SetEnvelope{7.5in}{3.875in}% + \PSEnvelopeTray={/monarcenvelopetray }} +\DeclareOption{bookletenvelope}{\SetEnvelope{10.5in}{7.5in}} +\DeclareOption{personalenvelope}{\SetEnvelope{6.5in}{3.625in}} +\DeclareOption{c6envelope}{\SetEnvelope{162mm}{114mm}} +\DeclareOption{c65envelope}{\SetEnvelope{224mm}{114mm}} +\DeclareOption{c5envelope}{\SetEnvelope{229mm}{162mm}% + \PSEnvelopeTray={/162x229cenvelopetray }} +\DeclareOption{dlenvelope}{\SetEnvelope{220mm}{110mm}% + \PSEnvelopeTray={/dlenvelopetray }} +\DeclareOption{avery5160label}{% + \SetLabel{2.75in}{1in}{0.5in}{0.19in}{0.12in}{3}{10}} +\DeclareOption{avery5161label}{% + \SetLabel{4.19in}{1in}{0.5in}{0.16in}{0.19in}{2}{10}} +\DeclareOption{avery5162label}{% + \SetLabel{4.19in}{1.33in}{0.83in}{0.16in}{0.19in}{2}{7}} +\DeclareOption{avery5163label}{% + \SetLabel{4.19in}{2in}{0.5in}{0.16in}{0.19in}{2}{5}} +\DeclareOption{avery5164label}{% + \SetLabel{4.19in}{3.33in}{0.5in}{0.16in}{0.19in}{2}{3}} +\DeclareOption{herma4625label}{% + \SetLabel{105mm}{42.3mm}{0mm}{5mm}{5mm}{2}{7}} +\DeclareOption{avery5262label}{% + \SetLabel{110mm}{34mm}{21mm}{4mm}{5mm}{2}{7}} +\DeclareOption{avery5163biglabel}{% + \SetBigLabel{4.19in}{2in}{0.5in}{0.16in}{0.19in}{2}{5}% + \setlength{\ToAddressTopMargin}{0.1in}}% +\DeclareOption{avery5164biglabel}{% + \SetBigLabel{4.19in}{3.33in}{0.5in}{0.16in}{0.19in}{2}{3}}% +\DeclareOption{rotateenvelopes}{\@rotateenvelopestrue} +\DeclareOption{norotateenvelopes}{\@rotateenvelopesfalse} +\DeclareOption{centerenvelopes}{\@envelopeposition=0\relax} +\DeclareOption{leftenvelopes}{\@envelopeposition=1\relax} +\DeclareOption{rightenvelopes}{\@envelopeposition=2\relax} +\DeclareOption{customenvelopes}{\@envelopeposition=3\relax} +\DeclareOption{printbarcodes}{\@barcodestrue} +\DeclareOption{noprintbarcodes}{\@barcodesfalse\@alwaysbarcodesfalse} +\DeclareOption{alwaysbarcodes}{\@alwaysbarcodestrue\@barcodestrue} +\DeclareOption{noalwaysbarcodes}{\@alwaysbarcodesfalse} +\DeclareOption{capaddress}{\@capitalizeaddresstrue} +\DeclareOption{nocapaddress}{\@capitalizeaddressfalse} +\DeclareOption{printreturnaddress}{\@printreturnaddresstrue} +\DeclareOption{noprintreturnaddress}{\@printreturnaddressfalse} +\DeclareOption{pswait}{\@pswaittrue\@psautotrayfalse} +\DeclareOption{nopswait}{\@pswaitfalse} +\DeclareOption{psautotray}{\@psautotraytrue\@pswaitfalse} +\DeclareOption{nopsautotray}{\@psautotrayfalse} +\DeclareOption{re}{\@EL@redefine@openingtrue} +\DeclareOption{nore}{\@EL@redefine@openingfalse} +\DeclareOption*{\PassOptionsToPackage{\CurrentOption}{graphics}} +\ExecuteOptions{businessenvelope,rotateenvelopes,centerenvelopes} +\ExecuteOptions{printbarcodes,capaddress} +\ExecuteOptions{nopswait,printreturnaddress,nopsautotray,nore} +\InputIfFileExists{envlab.cfg}{% + \typeout{Loading configuration file envlab.cfg}}{% + \typeout{Configuration file envlab.cfg is not found}} +\ProcessOptions +\IfFileExists{graphics.sty}{% + \RequirePackage{graphics}}{% + \PackageWarning{envlab}{% + You don't have the graphics package!\MessageBreak + Probably you will not be able to print\MessageBreak + envelopes sidewise. \MessageBreak}} +\def\@beginlabelshook{\relax} +\def\@beginlabelpagehook{\relax} +\def\AtBeginLabels{\g@addto@macro\@beginlabelshook} +\def\AtBeginLabelPage{\g@addto@macro\@beginlabelpagehook} +\def\PSwait{\special{ps: clear grestore @manualfeed 0 0 bop}} +\edef\PSautotray{% + \special{ps:clear grestore + statusdict begin false setduplexmode + /manualfeed true def + \the\PSEnvelopeTray end 0 0 bop }} +\if@pswait + \AtBeginLabels{\PSwait}% +\else + \if@psautotray + \AtBeginLabels{\PSautotray}% + \fi +\fi +\newcounter{LabelCountCol} +\newcounter{LabelCountRow} +\newcounter{LabelOffsetCol} +\newcounter{LabelOffsetRow} +\setcounter{LabelOffsetCol}{1} +\setcounter{LabelOffsetRow}{1} +\DeclareRobustCommand{\FirstLabel}[2]{% + \setcounter{LabelOffsetRow}{#1}% + \setcounter{LabelOffsetCol}{#2}} +\def\@toaddressfont{% + \ifcase\@ptsize \normalsize\or\small\fi% + \rmfamily\selectfont} +\def\@fromaddressfont{% + \ifcase\@ptsize \normalsize\or\small\or\footnotesize\fi% + \normalfont} +\def\returnaddress{\fromaddress} +\def\startlabels{% + \clearpage% + \pagestyle{empty}% + \setlength{\topmargin}{-1.0in}% + \if@envelope% + \addtolength{\topmargin}{\EnvelopeTopMargin}% + \else \addtolength{\topmargin}{\LabelTopMargin}% + \fi% + \setlength{\headheight}{0pt}% + \setlength{\headsep}{0pt}% + \setlength{\footskip}{0pt}% + \setlength{\textheight}{200in}% + \setlength\paperheight{\textheight}% + \global\vsize=200in\relax% + \addtolength{\textheight}{-\topmargin}% + \addtolength{\textheight}{-1.0in}% + \setlength{\oddsidemargin}{-1.0in}% + \if@envelope\relax% + \else% + \addtolength{\oddsidemargin}{\LabelLeftMargin}% + \fi% + \setlength{\evensidemargin}{\oddsidemargin}% + \setlength{\textwidth}{20in}% + \hsize=20in% + \baselineskip=0pt% + \lineskip=0pt% + \parindent=0pt% + \if@envelope + \ifcase\the\@envelopeposition% + \setlength{\EnvelopeLeftMargin}{\paperwidth}% + \if@rotateenvelopes% + \addtolength{\EnvelopeLeftMargin}{-\EnvelopeHeight}% + \else% + \addtolength{\EnvelopeLeftMargin}{-\EnvelopeWidth}% + \fi% + \setlength{\EnvelopeLeftMargin}{0.5\EnvelopeLeftMargin}% + \or% + \setlength{\EnvelopeLeftMargin}{0pt}% + \or% + \setlength{\EnvelopeLeftMargin}{\paperwidth}% + \if@rotateenvelopes% + \addtolength{\EnvelopeLeftMargin}{-\EnvelopeHeight}% + \else% + \addtolength{\EnvelopeLeftMargin}{-\EnvelopeWidth}% + \fi% + \else% + \relax% + \fi% + \else% + \setcounter{LabelCountCol}{\theLabelOffsetCol}% + \setcounter{LabelCountRow}{\theLabelOffsetRow}% + \ifnum\theLabelOffsetRow>1% + \null% + \loop \vspace*{\LabelHeight}% + \addtocounter{LabelOffsetRow}{-1} \ifnum\theLabelOffsetRow>1% + \repeat% + \fi% + \ifnum\theLabelOffsetCol>1% + \loop \hspace*{\LabelWidth}\nolinebreak% + \addtocounter{LabelOffsetCol}{-1} \ifnum\theLabelOffsetCol>1% + \repeat% + \fi% + \nopagebreak% + \fi% + \spaceskip0pt\relax% + \xspaceskip 0pt\relax% + \clubpenalty=0% + \widowpenalty=0% + \raggedbottom% + \sloppy% + \setlength\hfuzz{5in}% + \setlength\vfuzz{5in}% + \ignorespaces% + \@beginlabelshook% + \@beginlabelpagehook% + \nopagebreak}% +\newcommand{\PrintReturnAddress}[1]{% + \vspace*{\FromAddressTopMargin} + \null\hspace{\FromAddressLeftMargin} + \parbox[t][\FromAddressHeight]{\FromAddressWidth}% + {\@fromaddressfont \lineskip=1pt + \if@printreturnaddress #1\else\relax\fi}} +\newcommand{\PrintAddress}[1]{% + \vspace*{\ToAddressTopMargin} + \leavevmode + \null\hspace*{\ToAddressLeftMargin} + \parbox[t]{\ToAddressWidth}{% + \lineskip=1pt + \if@barcodes \PrintBarCode{#1} \fi + \@toaddressfont + \if@capitalizeaddress \@make@capitalize{#1} \else #1 \fi}} +\newcommand{\PrintLabel}[1]{% + \parbox[t][\LabelHeight]{\LabelWidth}{% + \PrintAddress{#1}}} +\newcommand{\PrintBigLabel}[2]{% + \begin{minipage}[t][\LabelHeight]{\LabelWidth}% + \baselineskip=0pt% + \lineskip=0pt% + \parindent=0pt% + \begin{center}% + \PrintReturnAddress{#1}\\% + \rule{\ToAddressWidth}{0.1pt}% + \PrintAddress{#2}% + \end{center}% + \end{minipage}} +\newcommand{\PrintEnvelope}[2]{% + \begin{minipage}[t][\EnvelopeHeight]{\EnvelopeWidth}% + \baselineskip=0pt% + \lineskip=0pt% + \parindent=0pt% + \PrintReturnAddress{#1}\\% + \begin{center}% + \PrintAddress{#2}% + \end{center}% + \end{minipage}} +\newcommand{\@PrintEnvelope}[2]{% + \if@rotateenvelopes\rotatebox{90}{\PrintEnvelope{#1}{#2}}% + \else\PrintEnvelope{#1}{#2}% + \fi} +\renewcommand{\mlabel}[2]{\ignorespaces% + \spaceskip 0pt\relax% + \xspaceskip 0pt\relax% + \if@envelope% + \leavevmode% + \hspace*{\EnvelopeLeftMargin}% + \@PrintEnvelope{#1}{#2}% + \clearpage% + \@beginlabelpagehook% + \else% + \ignorespaces% + \ifnum\theLabelCountCol>\theLabelMaxCol% + \\\nopagebreak% + \stepcounter{LabelCountRow}% + \setcounter{LabelCountCol}{1}% + \fi% + \ifnum\theLabelCountRow>\theLabelMaxRow% + \vfill\eject\@beginlabelpagehook% + \setcounter{LabelCountRow}{1}% + \setcounter{LabelCountCol}{1}% + \fi% + \if@biglabel% + \PrintBigLabel{#1}{#2}% + \else% + \PrintLabel{#2}% + \fi% + \ignorespaces\nolinebreak% + \stepcounter{LabelCountCol}% + \fi}% +\newcount\@numreturnlabels +\newcommand{\printreturnlabels}[2]{% + \@numreturnlabels=#1 + \def\@toaddressfont{\@fromaddressfont} + \@capitalizeaddressfalse + \@barcodesfalse + \startlabels + \loop \mlabel{\relax}{#2} \advance\@numreturnlabels by -1 + \ifnum\@numreturnlabels>0\repeat} +\newcommand{\PrintBarCode}[1]{% + \@extractbarcode{#1} + \@printbarcode} +\newtoks\@zipcode +\newcount\@zipcodesum +\newif\if@zipcodefound +\long\def\@finishzipcode#1{} +\long\def\@firstzipcode#1{% + \@zipcode{#1} + \@zipcodesum=#1\relax + \@zipcodefoundtrue + \@zipcodeloop} +\long\def\@continuezipcode#1{% + \@zipcode=\expandafter{\the\@zipcode#1} + \advance\@zipcodesum by #1 + \@zipcodeloop} +\long\def\@dashzipcode#1{\@zipcodeloop} +\def\@spacezipcode{% + \@zipcodefoundfalse + \afterassignment\@zipcodeloop\let\EL@temp= } +\long\def\@abortzipcode#1{% + \@zipcodefoundfalse + \@zipcodeloop} +\def\@zipcodeloop{\futurelet\EL@temp\@zipcodeloop@} +\def\@zipcodeloop@{% + \ifx \@endaddress\EL@temp \def\EL@tempa{\@finishzipcode} \else + \ifx 0\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 1\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 2\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 3\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 4\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 5\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 6\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 7\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 8\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 9\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx -\EL@temp \if@zipcodefound \def\EL@tempa{\@dashzipcode} + \else \def\EL@tempa{\@abortzipcode} \fi \else + \ifx \@sptoken\EL@temp \def\EL@tempa{\@spacezipcode} \else + \def\EL@tempa{\@abortzipcode} + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi + \EL@tempa} +\long\def\@extractbarcode#1{% + \@zipcodefoundfalse + \@zipcodeloop#1\@endaddress + \if@alwaysbarcodes \@zipcodefoundtrue \fi + \if@zipcodefound + \ifnum\the\@zipcodesum>0 + \loop \advance \@zipcodesum by -10 \ifnum\the\@zipcodesum>0 + \repeat + \fi + \multiply\@zipcodesum by -1 + \fi} +\newlength{\@barcodewidth} +\newlength{\@barcodeLheight} +\newlength{\@barcodeSheight} +\newlength{\@barcodeskip} +\setlength{\@barcodewidth}{0.020in} +\setlength{\@barcodeLheight}{0.125in} +\setlength{\@barcodeSheight}{0.050in} +\setlength{\@barcodeskip}{0.026in} +\DeclareRobustCommand{\@barL}{% + \rule{\@barcodewidth}{\@barcodeLheight}\hspace{\@barcodeskip}} +\DeclareRobustCommand{\@barS}{% + \rule{\@barcodewidth}{\@barcodeSheight}\hspace{\@barcodeskip}} +\def\@printonezip#1{% + \ifx1#1\@barS\@barS\@barS\@barL\@barL\else + \ifx2#1\@barS\@barS\@barL\@barS\@barL\else + \ifx3#1\@barS\@barS\@barL\@barL\@barS\else + \ifx4#1\@barS\@barL\@barS\@barS\@barL\else + \ifx5#1\@barS\@barL\@barS\@barL\@barS\else + \ifx6#1\@barS\@barL\@barL\@barS\@barS\else + \ifx7#1\@barL\@barS\@barS\@barS\@barL\else + \ifx8#1\@barL\@barS\@barS\@barL\@barS\else + \ifx9#1\@barL\@barS\@barL\@barS\@barS\else + \ifx0#1\@barL\@barL\@barS\@barS\@barS\else + \ifx S#1\def\EL@tempa{\relax}% + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi% + \EL@tempa} +\def\@printbarcode{% + \if@zipcodefound + \mbox{% + \@barL% + \def\EL@tempa{\@printonezip}% + \expandafter\EL@tempa\the\@zipcode S% + \def\EL@tempa{\@printonezip}% + \expandafter\EL@tempa\the\@zipcodesum S% + \@barL} + \\[1ex] + \fi} +\newtoks\@addr@cap +\long\def\@finishaddrcap#1{} +\long\def\@dotcommaaddrcap#1{% + \@addrcaploop} +\long\def\@newlineaddrcap#1{% + \@addr@cap=\expandafter{\the\@addr@cap #1} + \@addrcaploop} +\long\def\@bgroupaddrcap#1{% + \@addr@cap=\expandafter{\the\@addr@cap {\MakeUppercase{#1}}} + \@addrcaploop} +\def\@spaceaddrcap{% + \@addr@cap=\expandafter{\the\@addr@cap\hspace{0.6em}} + \afterassignment\@addrcaploop\let\EL@temp= } +\def\@otheraddrcap#1{% + \@addr@cap=\expandafter{\the\@addr@cap% + \MakeUppercase{#1}\kern1pt\relax} + \@addrcaploop} +\def\@addrcaploop{\futurelet\EL@temp\@addrcaploop@} +\def\@addrcaploop@{% + \ifx \@endaddress\EL@temp \def\EL@tempa{\@finishaddrcap} \else + \ifx .\EL@temp \def\EL@tempa{\@dotcommaaddrcap} \else + \ifx ,\EL@temp \def\EL@tempa{\@dotcommaaddrcap} \else + \ifx \voidb@x\EL@temp \def\EL@tempa{\@dotcommaaddrcap} \else + \ifx \unhbox\EL@temp \def\EL@tempa{\@dotcommaaddrcap} \else + \ifx \\\EL@temp \def\EL@tempa{\@newlineaddrcap} \else + \ifx \bgroup\EL@temp \def\EL@tempa{\@bgroupaddrcap} \else + \ifx \@sptoken\EL@temp \def\EL@tempa{\@spaceaddrcap} \else + \def\EL@tempa{\@otheraddrcap} + \fi\fi\fi\fi\fi\fi\fi\fi + \EL@tempa} +\long\def\@make@capitalize#1{% + \@addr@cap={\relax} + \@addrcaploop#1\@endaddress + \the\@addr@cap} +\let\@@mlabel=\@gobbletwo +\AtEndDocument{\let\@@mlabel=\@mlabel} +\def\suppresslabels{\if@filesw\immediate\write\@auxout{% + \string\@suppresslabels}\fi} +\def\@suppresslabels{\let\@mlabel=\@gobbletwo} +\def\resumelabels{\if@filesw\immediate\write\@auxout{% + \string\@resumelabels}\fi} +\def\@resumelabels{\let\@mlabel=\@@mlabel} +\def\suppressonelabel{\if@filesw\immediate\write\@auxout{% + \string\@suppressonelabel}\fi} +\def\@suppressonelabel{\let\@old@mlabel=\@mlabel% + \def\@mlabel{% + \let\@mlabel=\@old@mlabel% + \@gobbletwo}} +\def\printonelabel{\if@filesw\immediate\write\@auxout{% + \string\@printonelabel}\fi} +\def\@printonelabel{\let\@old@mlabel=\@mlabel% + \def\@mlabel{% + \let\@mlabel=\@old@mlabel% + \@@mlabel}} +\def\ChangeEnvelope{\@ifstar{\@ChangeEnvelopeStar}{\@ChangeEnvelope}} +\newcommand\@ChangeEnvelopeStar[3][0pt]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetEnvelope[#1]{#2}{#3}}% + \fi} +\newcommand\@ChangeEnvelope[3][0pt]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetEnvelope[#1]{#2}{#3}} + \immediate\write\@auxout{\string\@startlabels} + \fi} +\def\@SetEnvelope[#1]#2#3{} +\AtEndDocument{\let\@SetEnvelope=\SetEnvelope} +\def\ChangeLabel{\@ifstar{\@ChangeLabelStar}{\@ChangeLabel}} +\newcommand\@ChangeLabelStar[7]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetLabel{#1}{#2}{#3}{#4}{#5}{#6}{#7}}% + \fi} +\newcommand\@ChangeLabel[7]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetLabel{#1}{#2}{#3}{#4}{#5}{#6}{#7}} + \immediate\write\@auxout{\string\@startlabels} + \fi} +\def\@SetLabel#1#2#3#4#5#6#7{} +\AtEndDocument{\let\@SetLabel=\SetLabel} +\def\ChangeBigLabel{\@ifstar{\@ChangeBigLabelStar}{\@ChangeBigLabel}} +\newcommand\@ChangeBigLabelStar[7]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetBigLabel{#1}{#2}{#3}{#4}{#5}{#6}{#7}}% + \fi} +\newcommand\@ChangeBigLabel[7]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetBigLabel{#1}{#2}{#3}{#4}{#5}{#6}{#7}} + \immediate\write\@auxout{\string\@startlabels} + \fi} +\def\@SetBigLabel#1#2#3#4#5#6#7{} +\AtEndDocument{\let\@SetBigLabel=\SetBigLabel} +\if@EL@redefine@opening + \newcommand*{\re}[1]{\def\recontents{#1}}% + \def\ReName{Re: }% + \renewcommand*{\opening}[1]{\ifx\@empty\fromaddress + \thispagestyle{firstpage}% + {\raggedleft\@date\par}% + \else % home address + \thispagestyle{empty}% + {\raggedleft\begin{tabular}{l}\ignorespaces + \fromaddress \\*[2\parskip]% + \@date \end{tabular}\par}% + \fi + \vspace{2\parskip}% + {\raggedright \toname \\ \toaddress \par}% + \ifx\@empty\recontents\relax + \else + {\raggedright \ReName \recontents \par}% + \fi + \vspace{2\parskip}% + #1\par\nobreak}% +\fi +\endinput +%% +%% End of file `envlab.sty'. diff --git a/mitletter1.cls b/mitletter1.cls new file mode 100644 index 0000000..1ddb16d --- /dev/null +++ b/mitletter1.cls @@ -0,0 +1,97 @@ +\NeedsTeXFormat{LaTeX2e} +\ProvidesClass{mitletter1} +\DeclareOption*{\PassOptionsToClass{\CurrentOption}{letter}} +\ProcessOptions +\LoadClass{letter} +\usepackage[dvips]{graphics} +\usepackage[businessenvelope]{envlab} + +\raggedright +\setlength{\topmargin}{-1in} +\setlength{\oddsidemargin}{.25in} +\setlength{\evensidemargin}{.25in} +\setlength{\textwidth}{6.5in} +\setlength{\textheight}{8in} +\setlength{\headsep}{1in} +\setlength{\footskip}{1.625in} + +\DeclareFixedFont{\boldfont}{OT1}{cmss}{bx}{n}{8} +\DeclareFixedFont{\regularfont}{OT1}{cmss}{m}{n}{8} +\DeclareFixedFont{\boldfontb}{OT1}{cmss}{bx}{n}{9} +\DeclareFixedFont{\regularfontb}{OT1}{cmss}{m}{n}{9} +\DeclareFixedFont{\italicfont}{OT1}{cmr}{m}{it}{10} + + +\renewcommand{\ps@headings}{% + \let\@oddfoot\@empty\let\@evenfoot\@empty + \def\@oddhead{\slshape\headtoname{} \ignorespaces\toname + \@date + \hfil \pagename{} \thepage}% + \let\@evenhead\@oddhead} +\renewcommand*{\opening}[1]{\ifx\@empty\fromaddress + \thispagestyle{firstpage}% + \@date\\% + \else % home address + \thispagestyle{empty}% + {\raggedleft\begin{tabular}{l@{}}\ignorespaces + \fromaddress \\*[2\parskip]% + \@date \end{tabular}\par}% + \fi + \vspace{2\parskip}% + {\raggedright \toname \\ \toaddress \par}% + \vspace{2\parskip}% + #1\par\nobreak\reversemarginpar\marginpar{\hspace*{.35in}\raisebox{.2in}{\scalebox{.33}{\includegraphics*{mitlogo.eps}}}\normalmarginpar}} +\renewcommand*{\signature}[1]{\def\fromsig{\italicfont #1}} +\newcommand{\officename}{Office Name} +\newcommand{\associateofficename}{Associate Office Name} +\newcommand{\roomnumber}{X00-000} +\newcommand{\phonenum}{617.000.0000} +\newcommand{\faxnum}{617.000.0000} +\newcommand{\website}{web.mit.edu/abcdefghijk} +\newcommand{\email}{user@mit.edu} +\newcommand{\person}{Your name} +\newcommand{\ID}{Your title} + +\newsavebox{\headone} +\sbox{\headone}{\parbox[t]{2.5in}{\boldfont{Massachusetts Institute of Technology}}} +\newsavebox{\headtwo} +\sbox{\headtwo} + {\parbox[t]{2in}{\setlength{\baselineskip}{9.2pt}\boldfontb{\person}\\\regularfontb{\ID}}} +\newsavebox{\headthree} +\sbox{\headthree} + {\parbox[t]{2in}{\setlength{\baselineskip}{9.2pt}\boldfont{\officename}\\ + \regularfont{Building \roomnumber}}} +\newsavebox{\headfour} +\sbox{\headfour} + {\parbox[t]{2in}{\setlength{\baselineskip}{9.2pt}\regularfont{77 Massachusetts Avenue}\\ + \regularfont{Cambridge, Massachusetts}\\ + \regularfont{02139-4307}}} +\newsavebox{\headfive} +\sbox{\headfive} + {\parbox[t]{2in}{\setlength{\baselineskip}{9.2pt}\regularfont{Phone \hspace{.13cm}\phonenum}\\ + \regularfont{Fax \hspace{.47cm}\faxnum}\\ + \regularfont{Email \hspace{.22cm}\email}\\ + \regularfont{\website}}} +\newsavebox{\header} +\sbox{\header} + {\begin{tabular*}{\textwidth}{lll@{\extracolsep{\fill}}} + \usebox{\headone} & \usebox{\headtwo} & \usebox{\headfour} \\ + & \usebox{\headthree} & \raisebox{-.1in}{\usebox{\headfive}} + \end{tabular*}} + +\newsavebox{\envelope} +\sbox{\envelope} + {\parbox[t]{7cm}{\setlength{\baselineskip}{9.2pt}\boldfont{\officename\\\associateofficename\\\\Massachusetts Institute of Technology}\\\regularfont{77 Massachusetts Avenue, Building \roomnumber} \\\regularfont{Cambridge, MA 02139-4307} \\\\\\\\\\\\\\\\ \scalebox{.30}{\includegraphics*{mitlogo.eps}}}} + +\renewcommand{\returnaddress}{\protect\usebox{\envelope}} + + +\renewcommand{\ps@firstpage} + {\setlength{\headheight}{70pt}\setlength{\headsep}{25pt}% + \renewcommand{\@oddhead}{\usebox{\header}}% + \renewcommand{\@evenhead}{}\renewcommand{\@evenfoot}{}} + +\providecommand{\@evenhead}{}\providecommand{\@oddhead}{} +\providecommand{\@evenfoot}{}\providecommand{\@oddfoot}{} + +\pagestyle{headings} diff --git a/mitlogo.eps b/mitlogo.eps new file mode 100644 index 0000000..1b5ebac --- /dev/null +++ b/mitlogo.eps @@ -0,0 +1,2160 @@ +%!PS-Adobe-3.0 EPSF-3.0 +%%BoundingBox: 0 0 145 75 +%%HiResBoundingBox: 0.000000 0.000000 145.000000 75.000000 +%........................................... +%%Creator: AFPL Ghostscript 703 (epswrite) +%%CreationDate: 2003/07/01 16:59:26 +%%DocumentData: Clean7Bit +%%LanguageLevel: 2 +%%EndComments +%%BeginProlog +% This copyright applies to everything between here and the %%EndProlog: +% Copyright (C) 2001 artofcode LLC, Benicia, CA. All rights reserved. +%%BeginResource: procset GS_epswrite_2_0_1001 +/GS_epswrite_2_0_1001 80 dict dup begin +/PageSize 2 array def/setpagesize{ PageSize aload pop 3 index eq exch +4 index eq and{ pop pop pop}{ PageSize dup 1 +5 -1 roll put 0 4 -1 roll put dup where{ exch get exec} +{ pop/setpagedevice where +{ pop 1 dict dup /PageSize PageSize put setpagedevice} +{ /setpage where{ pop PageSize aload pop pageparams 3 {exch pop} repeat +setpage}if}ifelse}ifelse}ifelse} bind def +/!{bind def}bind def/#{load def}!/N/counttomark # +/rG{3{3 -1 roll 255 div}repeat setrgbcolor}!/G{255 div setgray}!/K{0 G}! +/r6{dup 3 -1 roll rG}!/r5{dup 3 1 roll rG}!/r3{dup rG}! +/w/setlinewidth #/J/setlinecap # +/j/setlinejoin #/M/setmiterlimit #/d/setdash #/i/setflat # +/m/moveto #/l/lineto #/c/rcurveto # +/p{N 2 idiv{N -2 roll rlineto}repeat}! +/P{N 0 gt{N -2 roll moveto p}if}! +/h{p closepath}!/H{P closepath}! +/lx{0 rlineto}!/ly{0 exch rlineto}!/v{0 0 6 2 roll c}!/y{2 copy c}! +/re{4 -2 roll m exch dup lx exch ly neg lx h}! +/^{3 index neg 3 index neg}! +/f{P fill}!/f*{P eofill}!/s{H stroke}!/S{P stroke}! +/q/gsave #/Q/grestore #/rf{re fill}! +/Y{P clip newpath}!/Y*{P eoclip newpath}!/rY{re Y}! +/|={pop exch 4 1 roll 3 array astore cvx exch 1 index def exec}! +/|{exch string readstring |=}! +/+{dup type/nametype eq{2 index 7 add -3 bitshift 2 index mul}if}! +/@/currentfile #/${+ @ |}! +/B{{2 copy string{readstring pop}aload pop 4 array astore cvx +3 1 roll}repeat pop pop true}! +/Ix{[1 0 0 1 11 -2 roll exch neg exch neg]exch}! +/,{true exch Ix imagemask}!/If{false exch Ix imagemask}!/I{exch Ix image}! +/Ic{exch Ix false 3 colorimage}! +/F{/Columns counttomark 3 add -2 roll/Rows exch/K -1/BlackIs1 true>> +/CCITTFaxDecode filter}!/FX{<