From: Benjamin Mako Hill Date: Sat, 8 Jun 2013 21:52:53 +0000 (-0400) Subject: initial version of coverletter sent to UW X-Git-Url: https://projects.mako.cc/source/bmh-jobmarket_coverletter/commitdiff_plain/9ef7aaaf0a10daacc9ec48ab815902051ce5191d?ds=inline initial version of coverletter sent to UW --- 9ef7aaaf0a10daacc9ec48ab815902051ce5191d diff --git a/Makefile b/Makefile new file mode 100644 index 0000000..6d56555 --- /dev/null +++ b/Makefile @@ -0,0 +1,20 @@ +#!/usr/bin/make + +all: $(patsubst %.tex,%.pdf,$(wildcard *.tex)) +pdf: all + +%.pdf: %.tex + rubber -fd $< + +clean: + rubber -d --clean *.tex + rm -f *.tmp + +viewpdf: all + evince *.pdf + +spell: + aspell -c -t --tex-check-comments -b text.tex + + +.PHONY: clean all diff --git a/envlab.cfg b/envlab.cfg new file mode 100644 index 0000000..f9a0262 --- /dev/null +++ b/envlab.cfg @@ -0,0 +1,47 @@ +%% +%% This is file `envlab.cfg', +%% generated with the docstrip utility. +%% +%% The original source files were: +%% +%% envlab.dtx (with options: `cfg') +%% +%% You are allowed and encouraged to modify THIS file. +%% +%% The first part of this file contains default options for your site. +%% The second part (inside AtEndOfPackage declaration) should contain +%% customization commands specific to your site. +%% +%% Good luck +%% +\ProvidesFile{envlab.cfg} +[1997/07/16 v1.2 Envelopes and Labels] +%% +%% \CharacterTable +%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z +%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z +%% Digits \0\1\2\3\4\5\6\7\8\9 +%% Exclamation \! Double quote \" Hash (number) \# +%% Dollar \$ Percent \% Ampersand \& +%% Acute accent \' Left paren \( Right paren \) +%% Asterisk \* Plus \+ Comma \, +%% Minus \- Point \. Solidus \/ +%% Colon \: Semicolon \; Less than \< +%% Equals \= Greater than \> Question mark \? +%% Commercial at \@ Left bracket \[ Backslash \\ +%% Right bracket \] Circumflex \^ Underscore \_ +%% Grave accent \` Left brace \{ Vertical bar \| +%% Right brace \} Tilde \~} +%% \changes{v1.2}{1996/07/16}{Updated User Guide} +%% +%% The default options go here +%% +\ExecuteOptions{businessenvelope,rotateenvelopes,centerenvelopes} +\ExecuteOptions{printbarcodes,capaddress} +\ExecuteOptions{nopswait,printreturnaddress,nopsautotray,nore} +%% +\AtEndOfPackage{\relax % Customization goes here +} +\endinput +%% +%% End of file `envlab.cfg'. diff --git a/envlab.drv b/envlab.drv new file mode 100644 index 0000000..52f0add --- /dev/null +++ b/envlab.drv @@ -0,0 +1,105 @@ +%% +%% This is file `envlab.drv', +%% generated with the docstrip utility. +%% +%% The original source files were: +%% +%% envlab.dtx (with options: `driver') +%% +%% IMPORTANT NOTICE: +%% +%% For the copyright see the source file. +%% +%% Any modified versions of this file must be renamed +%% with new filenames distinct from envlab.drv. +%% +%% For distribution of the original source see the terms +%% for copying and modification in the file envlab.dtx. +%% +%% This generated file may be distributed as long as the +%% original source files, as listed above, are part of the +%% same distribution. (The sources need not necessarily be +%% in the same archive or directory.) +\ProvidesFile{envlab.drv} +[1997/07/16 v1.2 Envelopes and Labels] +%% +%% Copyright Boris Veytsman 1996, 1997 +%% +%% +%% \CharacterTable +%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z +%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z +%% Digits \0\1\2\3\4\5\6\7\8\9 +%% Exclamation \! Double quote \" Hash (number) \# +%% Dollar \$ Percent \% Ampersand \& +%% Acute accent \' Left paren \( Right paren \) +%% Asterisk \* Plus \+ Comma \, +%% Minus \- Point \. Solidus \/ +%% Colon \: Semicolon \; Less than \< +%% Equals \= Greater than \> Question mark \? +%% Commercial at \@ Left bracket \[ Backslash \\ +%% Right bracket \] Circumflex \^ Underscore \_ +%% Grave accent \` Left brace \{ Vertical bar \| +%% Right brace \} Tilde \~} +\documentclass{ltxdoc} +\DoNotIndex{\@Alph,\@alph,\@arabic,\@badmath} +\DoNotIndex{\@centercr} +\DoNotIndex{\@empty,\@ignoretrue} +\DoNotIndex{\@ixpt} +\DoNotIndex{\@M,\@minus,\@ne,\@plus} +\DoNotIndex{\\,\addtolength} +\DoNotIndex{\advance} +\DoNotIndex{\ast,\begin,\begingroup,\bfseries,\bgroup,\box} +\DoNotIndex{\bullet} +\DoNotIndex{\cdot,\cr,\day,\DeclareOption} +\DoNotIndex{\def,\DocInput,\documentclass} +\DoNotIndex{\DoNotIndex,\egroup,\ifx,\else,\fi,\endtrivlist} +\DoNotIndex{\EnableCrossrefs,\end,\end@dblfloat,\end@float,\endgroup} +\DoNotIndex{\endlist,\everycr,\ExecuteOptions} +\DoNotIndex{\filedate,\filename,\fileversion} +\DoNotIndex{\global,\halign,\hangindent,\hbox,\hfil,\hfill,\hrule} +\DoNotIndex{\hsize,\hskip,\hspace,\hss,\ifcase,\or,\fi} +\DoNotIndex{\ifvmode,\fi,\ifnum,\fi,\input} +\DoNotIndex{\kern,\leavevmode,\let,\leftmark} +\DoNotIndex{\list,\llap,\long,\m@ne,\m@th,\mark} +\DoNotIndex{\month,\newcommand,\newcounter,\newenvironment} +\DoNotIndex{\NeedsTeXFormat,\newdimen} +\DoNotIndex{\newpage,\nobreak,\noindent,\number} +\DoNotIndex{\p@} +\DoNotIndex{\pagestyle,\par} +\DoNotIndex{\penalty,\PrintChanges,\PrintIndex,\ProcessOptions} +\DoNotIndex{\protect,\ProvidesClass,\raggedbottom,\raggedright} +\DoNotIndex{\refstepcounter,\relax,\renewcommand,\reset@font} +\DoNotIndex{\rightmargin,\rlap,\rmfamily} +\DoNotIndex{\setbox,\setcounter,\setlength} +\DoNotIndex{\skip,\slshape,\space} +\DoNotIndex{\trivlist,\typeout,\tw@} +\DoNotIndex{\vskip,\vspace,\year,\z@} +\DoNotIndex{\@ptsize,\@sptoken,\addtocounter,\afterassignment} +\DoNotIndex{\AtEndOfPackage,\baselineskip,\boxmaxdepth,\clearpage} +\DoNotIndex{\clubpenalty,\csname,\CurrentOption,\DeclareRobustCommand} +\DoNotIndex{\eject,\endcsname,\evensidemargin,\expandafter} +\DoNotIndex{\footnotesize,\footskip,\fromaddress,\futurelet} +\DoNotIndex{\headheight,\headsep,\hfuzz,\ignorespaces} +\DoNotIndex{\InputIfFileExists,\large,\lineskip,\loop} +\DoNotIndex{\MakeUppercase,\MessageBreak,\mbox,\multiply} +\DoNotIndex{\newcount,\newif,\newlength,\newtoks,\nolinebreak} +\DoNotIndex{\nopagebreak,\normalfont,\normalsize,\null,\newline} +\DoNotIndex{\oddsidemargin,\PackageError,\PackageInfo} +\DoNotIndex{\paperheight,\paperwidth,\parbox,\parindent} +\DoNotIndex{\PassOptionsToPackage,\ProvidesPackage,\RequirePackage} +\DoNotIndex{\rule,\selectfont,\sffamily,\sloppy,\small,\spaceskip} +\DoNotIndex{\stepcounter,\textheight,\textwidth,\the,\topmargin} +\DoNotIndex{\unhbox,\voidb@x,\vsize,\vfuzz,\widowpenalty,\xspaceskip} +\DoNotIndex{\AtBeginDocument,\AtEndDocument} +\usepackage{enumerate} +\CodelineIndex +\RecordChanges +\EnableCrossrefs +\begin{document} + \DocInput{envlab.dtx} +\end{document} +%% \changes{v1.2}{1996/07/16}{Updated User Guide} +\endinput +%% +%% End of file `envlab.drv'. diff --git a/envlab.dtx b/envlab.dtx new file mode 100644 index 0000000..6e479b4 --- /dev/null +++ b/envlab.dtx @@ -0,0 +1,1759 @@ +% \iffalse +%<*driver> +\ProvidesFile{envlab.drv} +% +%<*driver|package|cfg> +%<+package>\ProvidesPackage{envlab} +%<+cfg>\ProvidesFile{envlab.cfg} +[1997/07/16 v1.2 Envelopes and Labels] +% +%<*driver|package> +%% +%% Copyright Boris Veytsman 1996, 1997 +%% +% +%<*driver|package|cfg> +% \fi +%% +% \CheckSum{1378} +%% \CharacterTable +%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z +%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z +%% Digits \0\1\2\3\4\5\6\7\8\9 +%% Exclamation \! Double quote \" Hash (number) \# +%% Dollar \$ Percent \% Ampersand \& +%% Acute accent \' Left paren \( Right paren \) +%% Asterisk \* Plus \+ Comma \, +%% Minus \- Point \. Solidus \/ +%% Colon \: Semicolon \; Less than \< +%% Equals \= Greater than \> Question mark \? +%% Commercial at \@ Left bracket \[ Backslash \\ +%% Right bracket \] Circumflex \^ Underscore \_ +%% Grave accent \` Left brace \{ Vertical bar \| +%% Right brace \} Tilde \~} +% \iffalse +% +% +% \section{Documentation driver} +%<*driver> +% Nothing interesting here\dots +% \begin{macrocode} +\documentclass{ltxdoc} +\DoNotIndex{\@Alph,\@alph,\@arabic,\@badmath} +\DoNotIndex{\@centercr} +\DoNotIndex{\@empty,\@ignoretrue} +\DoNotIndex{\@ixpt} +\DoNotIndex{\@M,\@minus,\@ne,\@plus} +\DoNotIndex{\\,\addtolength} +\DoNotIndex{\advance} +\DoNotIndex{\ast,\begin,\begingroup,\bfseries,\bgroup,\box} +\DoNotIndex{\bullet} +\DoNotIndex{\cdot,\cr,\day,\DeclareOption} +\DoNotIndex{\def,\DocInput,\documentclass} +\DoNotIndex{\DoNotIndex,\egroup,\ifx,\else,\fi,\endtrivlist} +\DoNotIndex{\EnableCrossrefs,\end,\end@dblfloat,\end@float,\endgroup} +\DoNotIndex{\endlist,\everycr,\ExecuteOptions} +\DoNotIndex{\filedate,\filename,\fileversion} +\DoNotIndex{\global,\halign,\hangindent,\hbox,\hfil,\hfill,\hrule} +\DoNotIndex{\hsize,\hskip,\hspace,\hss,\ifcase,\or,\fi} +\DoNotIndex{\ifvmode,\fi,\ifnum,\fi,\input} +\DoNotIndex{\kern,\leavevmode,\let,\leftmark} +\DoNotIndex{\list,\llap,\long,\m@ne,\m@th,\mark} +\DoNotIndex{\month,\newcommand,\newcounter,\newenvironment} +\DoNotIndex{\NeedsTeXFormat,\newdimen} +\DoNotIndex{\newpage,\nobreak,\noindent,\number} +\DoNotIndex{\p@} +\DoNotIndex{\pagestyle,\par} +\DoNotIndex{\penalty,\PrintChanges,\PrintIndex,\ProcessOptions} +\DoNotIndex{\protect,\ProvidesClass,\raggedbottom,\raggedright} +\DoNotIndex{\refstepcounter,\relax,\renewcommand,\reset@font} +\DoNotIndex{\rightmargin,\rlap,\rmfamily} +\DoNotIndex{\setbox,\setcounter,\setlength} +\DoNotIndex{\skip,\slshape,\space} +\DoNotIndex{\trivlist,\typeout,\tw@} +\DoNotIndex{\vskip,\vspace,\year,\z@} +% +\DoNotIndex{\@ptsize,\@sptoken,\addtocounter,\afterassignment} +\DoNotIndex{\AtEndOfPackage,\baselineskip,\boxmaxdepth,\clearpage} +\DoNotIndex{\clubpenalty,\csname,\CurrentOption,\DeclareRobustCommand} +\DoNotIndex{\eject,\endcsname,\evensidemargin,\expandafter} +\DoNotIndex{\footnotesize,\footskip,\fromaddress,\futurelet} +\DoNotIndex{\headheight,\headsep,\hfuzz,\ignorespaces} +\DoNotIndex{\InputIfFileExists,\large,\lineskip,\loop} +\DoNotIndex{\MakeUppercase,\MessageBreak,\mbox,\multiply} +\DoNotIndex{\newcount,\newif,\newlength,\newtoks,\nolinebreak} +\DoNotIndex{\nopagebreak,\normalfont,\normalsize,\null,\newline} +\DoNotIndex{\oddsidemargin,\PackageError,\PackageInfo} +\DoNotIndex{\paperheight,\paperwidth,\parbox,\parindent} +\DoNotIndex{\PassOptionsToPackage,\ProvidesPackage,\RequirePackage} +\DoNotIndex{\rule,\selectfont,\sffamily,\sloppy,\small,\spaceskip} +\DoNotIndex{\stepcounter,\textheight,\textwidth,\the,\topmargin} +\DoNotIndex{\unhbox,\voidb@x,\vsize,\vfuzz,\widowpenalty,\xspaceskip} +\DoNotIndex{\AtBeginDocument,\AtEndDocument} +\usepackage{enumerate} +\CodelineIndex +\RecordChanges +\EnableCrossrefs +\begin{document} + \DocInput{envlab.dtx} +\end{document} +% \end{macrocode} +% +% \fi +% +% \changes{v0.9}{1996/05/31}{Beta version} +% \changes{v0.91}{1996/05/31}{Added new option---"alwaysbarcodes"} +% \changes{v1.0}{1996/06/09}{First released version} +% \changes{v1.1}{1996/07/08}{Fixed typos in "elold.ins"} +% \changes{v1.1}{1996/07/08}{Updated User Guide} +% \changes{v1.2}{1996/07/10}{Changed envlab.ins: made it parallel.} +%% \changes{v1.2}{1996/07/16}{Updated User Guide} +% +% \newcommand{\EL}{\textsl{EnvLab}} +% +% +% \GetFileInfo{envlab.drv} +% +% \title{Printing Envelopes and Labels in \LaTeXe: \EL\ Package +% \thanks{This file +% has version number \fileversion, last +% revised \filedate.} +% \thanks{\copyright Boris Veytsman, 1996, 1997} +% } +% \author{Boris Veytsman} +% \date{\filedate} +% \maketitle +% +% \tableofcontents +% +% +% \section{Introduction} +% \MakeShortVerb{\"} +% The standard "\makelabels" command in the \LaTeXe\ "letter.cls" +% documentclass typesets labels on Avery 5352 sheets. A typical user +% may want more. \EL\ redefines "\makelabels" in\footnote{hopefully} +% a more useful and customizable way +% +% The detailed usage of the package is described in the file +% "elguide.tex". Here we just comment the macros. +% +% \StopEventually +% +% \section{Identification} +% +% First, we must say ``Hello world.'' +% \begin{macrocode} +%<*package> +\NeedsTeXFormat{LaTeX2e} +% \end{macrocode} +% +% \begin{macro}{\envlab@ok} +% \begin{macro}{\envlab@oops} +% \changes{v1.2}{1997/07/10}{Used \cs{@ifundefined} instead of direct check} +% Now let us check whether we in the letter documentclass. Actually we +% will accept any class that has "\makelabels" defined (custom letter +% classes, etc.) +% \begin{macrocode} +\def\envlab@oops{% + \PackageError{envlab}% + {Envlab is used outside of \MessageBreak% + a letter-compatible documentclass}% + {You are trying to use Envelopes & Labels\MessageBreak% + package, but your documentclass does not\MessageBreak% + understand address formatting commands.\MessageBreak% + Try standard document class letter\MessageBreak}} +\def\envlab@ok{% + \PackageInfo{envlab}% + {Envelopes & Labels package: found makelabels...\MessageBreak% + Seems everything is OK. Good luck.}} +\@ifundefined{makelabels}{\envlab@oops}{\envlab@ok} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \section{Preliminary code} +% +% \subsection{Switches, etc.} +% +% +% \DescribeMacro{\if@envelope} +% \DescribeMacro{\if@biglabel} +% \changes{v1.2}{1997/07/13}{Added Big Labels---thanks to Genick +% Bar-Meir, "meyerson@msi.umn.edu"} +% There are three kinds of things we can print: envelopes (default) +% labels and big labels The differences are summarized in +% Table~\ref{tab:diffs}. +% \begin{table} +% \begin{center} +% \begin{tabular}{cccc} +% \hline +% Media & Number per page & Rotation & Return address \\ +% \hline +% Envelopes & One & Settable & Yes\\ +% Labels & Several & Not rotated & No\\ +% Big Labels & Several & Not rotated & Yes\\ +% \hline +% \end{tabular} +% \end{center} +% \caption{Differences between envelopes, labels and big labels} +% \label{tab:diffs} +% \end{table} +% +% \begin{macrocode} +\newif\if@envelope +\@envelopetrue +\newif\if@biglabel +\@biglabelfalse +% \end{macrocode} +% +% \DescribeMacro{\if@rotateenvelopes} +% \DescribeMacro{\if@printreturnaddress} +% Now we must determine whether we want to rotate envelopes and +% whether to include return address (both yes by default). +% \begin{macrocode} +\newif\if@rotateenvelopes +\@rotateenvelopestrue +\newif\if@printreturnaddress +\@printreturnaddresstrue +% \end{macrocode} +% +% \DescribeMacro{\@envelopeposition} +% Now let us decide how to print envelopes. They can be either centered +% (default) \emph{or} shifted to the left or to the right of the paper +% tray. The +% counter "\@envelopeposition" can be, correspondingly, either 0 or 1 +% or 2. The value of +% 3 corresponds to the ``custom placing'', when the user sets +% "\EnvelopeLeftMargin" manually. +% +% \begin{macrocode} +\newcount\@envelopeposition +\@envelopeposition=0\relax +% \end{macrocode} +% +% \begin{macro}{\if@pswait} +% \changes{v1.1}{1996/07/08}{Added \cs{if@pswait}} +% \begin{macro}{\if@psautotray} +% \changes{v1.1}{1997/07/13}{Added \cs{if@psautotray}} +% \begin{macro}{\PSEnvelopeTray} +% \changes{v1.1}{1997/07/13}{Added \cs{PSEnvelopeTray}} +% The switches "\if@pswait" and "\if@psautotray" control optional manual +% feeding of envelopes and labels in \textsl{Postscript} printers +% (see Section~\ref{sec:Print} for details). The register +% "\PSEnvelopeTray" contains the name of the required tray. +% \begin{macrocode} +\newif\if@pswait +\@pswaitfalse +\newif\if@psautotray +\@psautotrayfalse +\newtoks\PSEnvelopeTray +\PSEnvelopeTray={/otherenvelopetray } +% \end{macrocode} +% +% \end{macro} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\if@barcodes} +% \begin{macro}{\if@alwaysbarcodes} +% We can either print bar codes (default) or not. The second switch +% forces to print barcodes even if they are not last in the address +% (like "Pa 16801\\USA") +% \begin{macrocode} +\newif\if@barcodes +\newif\if@alwaysbarcodes +\@barcodestrue +\@alwaysbarcodesfalse +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\if@EL@redefine@opening} +% \changes{v1.2}{1997/07/14}{Wrote new command} +% Now let us decide whether to mess with the "\opening" command. +% \begin{macrocode} +\newif\if@EL@redefine@opening +\@EL@redefine@openingfalse +% \end{macrocode} +% \end{macro} +% +% +% \begin{macro}{\if@capitalizeaddress} +% Also, we can either capitalize the address (default) or not. +% \begin{macrocode} +\newif\if@capitalizeaddress +\@capitalizeaddresstrue +% \end{macrocode} +% \end{macro} +% +% \subsection{Lengths and numbers} +% +% We want all lengths to be user settable, so no "@" in the names. +% +% +% \DescribeMacro{\EnvelopeWidth} +% \DescribeMacro{\EnvelopeHeight} +% \DescribeMacro{\EnvelopeTopMargin} +% \DescribeMacro{\EnvelopeLeftMargin} +% An envelope has four basic lengths. +% The first two are self-evident. The third is the distance between the +% edge of the paper and the leading edge of the envelope. All +% pre-defined envelope sizes set this to zero. The fourth is the distance +% between the left edge of the paper and the envelope. Its value depends +% on the value of the "\@envelopeposition" variable. We will preset it to +% zero +% \begin{macrocode} +\newlength{\EnvelopeWidth} +\newlength{\EnvelopeHeight} +\newlength{\EnvelopeTopMargin} +\newlength{\EnvelopeLeftMargin} +\setlength{\EnvelopeLeftMargin}{0pt} +% \end{macrocode} +% +% +% \DescribeMacro{\LabelWidth} +% \DescribeMacro{\LabelHeight} +% \DescribeMacro{\LabelTopMargin} +% \DescribeMacro{\LabelLeftMargin} +% \DescribeMacro{\LabelRightMargin} +% A label has more parameters. +% The first two are the same as for the envelopes. The next two define the +% distances from the paper edges to the beginning of the labels. The +% last one describes the distance between the labels. +% \begin{macrocode} +\newlength{\LabelWidth} +\newlength{\LabelHeight} +\newlength{\LabelTopMargin} +\newlength{\LabelLeftMargin} +\newlength{\LabelRightMargin} +% \end{macrocode} +% +% \DescribeMacro{\c@LabelMaxCol} +% \DescribeMacro{\c@LabelMaxRow} +% The following numbers define, how many labels are in each row and how +% many rows are on each page +% \begin{macrocode} +\newcounter{LabelMaxCol} +\newcounter{LabelMaxRow} +% \end{macrocode} +% +% The lengths above are \emph{external} parameters that determine an +% envelope or a label. Now we will describe \emph{internal} lengths. We +% define them here because the commands "\SetEnvelope" and "\SetLabel" +% determine them basing on the given envelope or label type. +% +% +% \DescribeMacro{\FromAddressTopMargin} +% \DescribeMacro{\FromAddressLeftMargin} +% \DescribeMacro{\FromAddressHeight} +% \DescribeMacro{\FromAddressWidth} +% \DescribeMacro{\ToAddressTopMargin} +% \DescribeMacro{\ToAddressLeftMargin} +% \DescribeMacro{\ToAddressWidth} +% The following lengths are self-evident. +% \begin{macrocode} +\newlength{\FromAddressTopMargin} +\newlength{\FromAddressLeftMargin} +\newlength{\FromAddressHeight} +\newlength{\FromAddressWidth} +\newlength{\ToAddressTopMargin} +\newlength{\ToAddressLeftMargin} +\newlength{\ToAddressWidth} +% \end{macrocode} +% +% \subsection{Main setting commands} +% +% OK, we are ready to set up envelopes and labels. +% +% \begin{macro}{\SetEnvelope} +% \changes{v1.2}{1997/07/14}{Added \cs{@biglabelfalse}} +% The command "\SetEnvelope" has three parameters: optional top Margin, +% width and height of the envelope. +% \begin{macrocode} +\DeclareRobustCommand{\SetEnvelope}[3][0pt]{% + \@envelopetrue% + \@biglabelfalse% + \setlength{\EnvelopeTopMargin}{#1}% + \setlength{\EnvelopeWidth}{#2}% + \setlength{\EnvelopeHeight}{#3}% + \setlength{\FromAddressTopMargin}{0.5in}% + \setlength{\FromAddressLeftMargin}{0.5in}% + \setlength{\FromAddressHeight}{0.33\EnvelopeHeight}% + \setlength{\FromAddressWidth}{0.5\EnvelopeWidth}% + \setlength{\ToAddressTopMargin}{0.5in}% + \setlength{\ToAddressLeftMargin}{0.5in}% + \setlength{\ToAddressWidth}{3in}} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\SetLabel} +% \changes{v1.2}{1997/07/14}{Added \cs{@biglabelfalse}} +% The command "\SetLabel" has seven parameters: five lengths and two +% numbers. All are mandatory: +% \begin{macrocode} +\DeclareRobustCommand{\SetLabel}[7]{% + \@envelopefalse% + \@biglabelfalse% + \setlength{\LabelWidth}{#1}% + \setlength{\LabelHeight}{#2}% + \setlength{\LabelTopMargin}{#3}% + \setlength{\LabelLeftMargin}{#4}% + \setlength{\LabelRightMargin}{#5}% + \setcounter{LabelMaxCol}{#6}% + \setcounter{LabelMaxRow}{#7}% + \setlength{\ToAddressTopMargin}{0.1in}% + \setlength{\ToAddressLeftMargin}{0.2in}% + \setlength{\ToAddressWidth}{\LabelWidth}% + \addtolength{\ToAddressWidth}{-\ToAddressLeftMargin}% + \addtolength{\ToAddressWidth}{-\LabelRightMargin}} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\SetBigLabel} +% \changes{v1.2}{1997/07/14}{Wrote new command} +% The command "\SetBigLabel" has seven parameters: five lengths and two +% numbers. All are mandatory: +% \begin{macrocode} +\DeclareRobustCommand{\SetBigLabel}[7]{% + \@envelopefalse% + \@biglabeltrue% + \setlength{\LabelWidth}{#1}% + \setlength{\LabelHeight}{#2}% + \setlength{\LabelTopMargin}{#3}% + \setlength{\LabelLeftMargin}{#4}% + \setlength{\LabelRightMargin}{#5}% + \setcounter{LabelMaxCol}{#6}% + \setcounter{LabelMaxRow}{#7}% + \setlength{\FromAddressTopMargin}{0.0in}% + \setlength{\FromAddressLeftMargin}{0.5in}% + \setlength{\FromAddressHeight}{0.33\LabelHeight}% + \setlength{\ToAddressTopMargin}{0.1in}% + \setlength{\ToAddressLeftMargin}{0.5in}% + \setlength{\ToAddressWidth}{\LabelWidth}% + \addtolength{\ToAddressWidth}{-\ToAddressLeftMargin}% + \addtolength{\ToAddressWidth}{-\LabelRightMargin}% + \setlength{\FromAddressWidth}{\ToAddressWidth}} +% \end{macrocode} +% \end{macro} +% +% \section{Defining options} +% +% \subsection{Envelope Sizes} +% \changes{v1.2}{1996/07/22}{Added new option: dlenvelope (thanks to +% "J.P.Jansen@net.HCC.nl")} +% \changes{v1.2}{1997/07/13}{Added \cs{PSEnvelopeTray} to envelope +% options} +% \begin{macrocode} +\DeclareOption{businessenvelope}{\SetEnvelope{9.5in}{4.125in}% + \PSEnvelopeTray={/com10envelopetray }} +\DeclareOption{executiveenvelope}{\SetEnvelope{7.5in}{3.875in}% + \PSEnvelopeTray={/monarcenvelopetray }} +\DeclareOption{bookletenvelope}{\SetEnvelope{10.5in}{7.5in}} +\DeclareOption{personalenvelope}{\SetEnvelope{6.5in}{3.625in}} +\DeclareOption{c6envelope}{\SetEnvelope{162mm}{114mm}} +\DeclareOption{c65envelope}{\SetEnvelope{224mm}{114mm}} +\DeclareOption{c5envelope}{\SetEnvelope{229mm}{162mm}% + \PSEnvelopeTray={/162x229cenvelopetray }} +\DeclareOption{dlenvelope}{\SetEnvelope{220mm}{110mm}% + \PSEnvelopeTray={/dlenvelopetray }} +% \end{macrocode} +% +% \subsection{Labels sizes} +% +% \changes{v1.2}{1996/07/22}{Added new option: herma4625label (thanks to +% "J.P.Jansen@net.HCC.nl")} +% \changes{v1.2}{1996/09/06}{Added new option: avery5262label (thanks to +% Uri Blumenthal "uri@ibm.net")} +% \changes{v1.2}{1997/07/13}{Added new option: avery5164biglabel} +% \changes{v1.2}{1997/07/13}{Added new option: avery5163biglabel} +% +% \begin{macrocode} +\DeclareOption{avery5160label}{% + \SetLabel{2.75in}{1in}{0.5in}{0.19in}{0.12in}{3}{10}} +\DeclareOption{avery5161label}{% + \SetLabel{4.19in}{1in}{0.5in}{0.16in}{0.19in}{2}{10}} +\DeclareOption{avery5162label}{% + \SetLabel{4.19in}{1.33in}{0.83in}{0.16in}{0.19in}{2}{7}} +\DeclareOption{avery5163label}{% + \SetLabel{4.19in}{2in}{0.5in}{0.16in}{0.19in}{2}{5}} +\DeclareOption{avery5164label}{% + \SetLabel{4.19in}{3.33in}{0.5in}{0.16in}{0.19in}{2}{3}} +\DeclareOption{herma4625label}{% + \SetLabel{105mm}{42.3mm}{0mm}{5mm}{5mm}{2}{7}} +\DeclareOption{avery5262label}{% + \SetLabel{110mm}{34mm}{21mm}{4mm}{5mm}{2}{7}} +\DeclareOption{avery5163biglabel}{% + \SetBigLabel{4.19in}{2in}{0.5in}{0.16in}{0.19in}{2}{5}% + \setlength{\ToAddressTopMargin}{0.1in}}% +\DeclareOption{avery5164biglabel}{% + \SetBigLabel{4.19in}{3.33in}{0.5in}{0.16in}{0.19in}{2}{3}}% +% \end{macrocode} +% +% \subsection{Optional switches} +% +% \changes{v1.1}{1996/07/08}{Added new options: "printreturnaddress", +% "noprintreturnaddress"} +% \changes{v1.1}{1996/07/08}{Added new options: "pswait", +% "nopswait"} +% \changes{v1.2}{1997/07/13}{Added new options: "psautotray", +% "nopsautotray"} +% \changes{v1.2}{1997/07/14}{Added new options: "re", "nore"} +% All this should be evident\dots +% +% \begin{macrocode} +\DeclareOption{rotateenvelopes}{\@rotateenvelopestrue} +\DeclareOption{norotateenvelopes}{\@rotateenvelopesfalse} +\DeclareOption{centerenvelopes}{\@envelopeposition=0\relax} +\DeclareOption{leftenvelopes}{\@envelopeposition=1\relax} +\DeclareOption{rightenvelopes}{\@envelopeposition=2\relax} +\DeclareOption{customenvelopes}{\@envelopeposition=3\relax} +\DeclareOption{printbarcodes}{\@barcodestrue} +\DeclareOption{noprintbarcodes}{\@barcodesfalse\@alwaysbarcodesfalse} +\DeclareOption{alwaysbarcodes}{\@alwaysbarcodestrue\@barcodestrue} +\DeclareOption{noalwaysbarcodes}{\@alwaysbarcodesfalse} +\DeclareOption{capaddress}{\@capitalizeaddresstrue} +\DeclareOption{nocapaddress}{\@capitalizeaddressfalse} +\DeclareOption{printreturnaddress}{\@printreturnaddresstrue} +\DeclareOption{noprintreturnaddress}{\@printreturnaddressfalse} +\DeclareOption{pswait}{\@pswaittrue\@psautotrayfalse} +\DeclareOption{nopswait}{\@pswaitfalse} +\DeclareOption{psautotray}{\@psautotraytrue\@pswaitfalse} +\DeclareOption{nopsautotray}{\@psautotrayfalse} +\DeclareOption{re}{\@EL@redefine@openingtrue} +\DeclareOption{nore}{\@EL@redefine@openingfalse} +% \end{macrocode} +% +% \subsection{Unknown options} +% +% All options we did not declare above are probably the options for the +% "graphics" package; let us send them there. +% \begin{macrocode} +\DeclareOption*{\PassOptionsToPackage{\CurrentOption}{graphics}} +% \end{macrocode} +% +% \subsection{Default options}\label{sec:DefOpt} +% +% \changes{v1.1}{1996/07/08}{Fixed typo in "businessenvelope" option} +% \changes{v1.1}{1996/07/09}{Added default options: "nopswait", +% "printreturnaddress"} +% +% \begin{macrocode} +\ExecuteOptions{businessenvelope,rotateenvelopes,centerenvelopes} +\ExecuteOptions{printbarcodes,capaddress} +\ExecuteOptions{nopswait,printreturnaddress,nopsautotray,nore} +% \end{macrocode} +% +% \section{Configuration file} +% +% At this point we will look for the configuration file. This file is +% named "envlab.cfg". The options declared in this file will supersede +% the ones declared in Section~\ref{sec:DefOpt}, but will be in their +% turn be superseded by the options explicitly defined when the package +% is loaded. +% \begin{macrocode} +\InputIfFileExists{envlab.cfg}{% + \typeout{Loading configuration file envlab.cfg}}{% + \typeout{Configuration file envlab.cfg is not found}} +% \end{macrocode} +% +% Now let us discuss the structure of the configuration file. We want it +% to contain default options, and therefore to be loaded before the +% "\ProcessOptions" command. On the other hand we want it to contain +% some definitions that \emph{supersede} the ones in this package. The +% hook "\AtEndOfPackage" helps to do this: we will just delay all +% definitions until later. +% +% OK, let's construct an example of "envlab.cfg" file. The commands here +% essentially repeat Section~\ref{sec:DefOpt}, but we want to be +% foolproof\dots +% \begin{macrocode} +% +%<*cfg> +%% +%% The default options go here +%% +\ExecuteOptions{businessenvelope,rotateenvelopes,centerenvelopes} +\ExecuteOptions{printbarcodes,capaddress} +\ExecuteOptions{nopswait,printreturnaddress,nopsautotray,nore} +%% +\AtEndOfPackage{\relax % Customization goes here +} +% +%<*package> +% \end{macrocode} +% +% \section{Processing options and loading packages} +% \changes{v0.92}{1996/06/06}{Added \cs{IfFileExists} when loading packages} +% \begin{macrocode} +\ProcessOptions +\IfFileExists{graphics.sty}{% + \RequirePackage{graphics}}{% + \PackageWarning{envlab}{% + You don't have the graphics package!\MessageBreak + Probably you will not be able to print\MessageBreak + envelopes sidewise. \MessageBreak}} +% \end{macrocode} +% +% \section{Document layout} +% +% \subsection{Printer specific commands} +% \label{sec:Print} +% +% \DescribeMacro{\@beginlabelshook} +% \changes{v1.1}{1996/07/09}{Replaced \cs{@printpreamble} with +% \cs{@beginlabelshook}} +% The command "\@beginlabelshook" is called at the beginning of the +% printing of envelopes and labels. We define it to be a no-op, but it +% is possible to introduce some printer-specific commands (like paper +% change). +% \begin{macrocode} +\def\@beginlabelshook{\relax} +% \end{macrocode} +% +% \DescribeMacro{\@beginlabelpagehook} +% \changes{v1.1}{1996/07/09}{Introduced new command +% \cs{@beginlabelpagehook}} +% The command "\@beginlabelpagehook" is like "\@beginlabelshook", but is +% called at the beginning of each \emph{page} +% of envelopes and labels. +% \begin{macrocode} +\def\@beginlabelpagehook{\relax} +% \end{macrocode} +% +% \begin{macro}{\AtBeginLabels} +% \changes{v1.1}{1996/07/08}{Made \cs{AtBeginLabels} cumulative} +% \begin{macro}{\AtBeginLabelPage} +% \changes{v1.1}{1996/07/09}{Introduced \cs{AtBeginLabelPage}} +% The hooks "\AtBeginLabels" and "\AtBeginLabelPage" redefine +% "\@beginlabelshook" and "\@beginlabelpagehook". They are built like +% the standard \LaTeXe\ hooks +% "\AtBeginDocument", "\AtBeginDvi", etc. In the implementation we use the +% \emph{internal} \LaTeXe\ command "\g@addto@macro". In the current +% (June~1996) \LaTeXe\ release it is defined as: +% \DescribeMacro{\g@addto@macro} +% \begin{verbatim} +% \long\def\g@addto@macro#1#2{{% +% \toks@\expandafter{#1#2}% +% \xdef#1{\the\toks@}}} +% \end{verbatim} +% We quote this definition in case \emph{They} change Their minds\dots\ +% \begin{macrocode} +\def\AtBeginLabels{\g@addto@macro\@beginlabelshook} +\def\AtBeginLabelPage{\g@addto@macro\@beginlabelpagehook} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\PSwait} +% \changes{v1.1}{1996/07/09}{Put William Slough's code in a separate macro} +% \textsl{PostScript} printers can be switched to the manual feeding mode +% with the following code by \emph{William Slough} "". +% \begin{macrocode} +\def\PSwait{\special{ps: clear grestore @manualfeed 0 0 bop}} +% \end{macrocode} +% The author explains his code in the following way: +% \begin{quotation} +% Here is a possible explanation: +% +% The clear removes operands from the PostScript stack, which has the +% effect of reversing some actions from the *previous* bop. Unfortunately, +% it reverses other important actions too (such as font size), but the +% grestore seems to get these back. Then the desired @manualfeed, followed +% by the ``bop'' for the beginning of page. The pair of 0's are used for +% bop and are completely bogus. However, from what I could detect, 0's are +% as good as anything. The values that DVIPS provides for bop seem to be +% related to DVI page numbers. +% +% I make no guarantee about the reliability of this solution, but initial +% tests indicate it will work for my environment. +% \end{quotation} +% \end{macro} +% +% \begin{macro}{\PSautotray} +% \changes{v1.2}{1997/07/13}{Wrote new command} +% This implements the code by \emph{Uri Blumenthal} +% "". +% \begin{macrocode} +\edef\PSautotray{% + \special{ps:clear grestore + statusdict begin false setduplexmode + /manualfeed true def + \the\PSEnvelopeTray end 0 0 bop }} +% \end{macrocode} +% \end{macro} +% +% \changes{v1.1}{1996/07/08}{Added implementation of the "pswait" option} +% \changes{v1.1}{1996/07/09}{Moved \cs{PSwait} code to \cs{AtBeginLabelPage}} +% \changes{v1.1}{1996/07/15}{Moved \cs{PSwait} code to +% \cs{AtBeginLabels}} +% \changes{v1.1}{1997/07/13}{Added implementation of the "psautotray" option} +% The option "pswait" puts the "\PSwait" code in the beginning of each +% page. The option "\psautotray" puts there the "\PSautotray" code. +% \begin{macrocode} +\if@pswait + \AtBeginLabels{\PSwait}% +\else + \if@psautotray + \AtBeginLabels{\PSautotray}% + \fi +\fi +% \end{macrocode} +% +% +% \subsection{Some useful counters for labels} +% +% +% +% \DescribeMacro{\c@LabelCountCol} +% \DescribeMacro{\c@LabelCountRow} +% These counters store the position of the currently printed label: +% \begin{macrocode} +\newcounter{LabelCountCol} +\newcounter{LabelCountRow} +% \end{macrocode} +% +% +% \DescribeMacro{\c@LabelOffsetCol} +% \DescribeMacro{\c@LabelOffsetRow} +% And these counters provide the offset for the label printed on a +% partially used sheet: +% \begin{macrocode} +\newcounter{LabelOffsetCol} +\newcounter{LabelOffsetRow} +\setcounter{LabelOffsetCol}{1} +\setcounter{LabelOffsetRow}{1} +% \end{macrocode} +% +% \begin{macro}{\FirstLabel} +% \changes{v1.1}{1996/07/08}{Introduced new command \cs{FirstLabel}} +% The command "\FirstLabel"\marg{Row}\marg{Col} sets the counters +% "LabelOffsetRow" and "LabelOffsetCol". +% \begin{macrocode} +\DeclareRobustCommand{\FirstLabel}[2]{% + \setcounter{LabelOffsetRow}{#1}% + \setcounter{LabelOffsetCol}{#2}} +% \end{macrocode} +% \end{macro} +% +% +% \subsection{Fonts} +% +% +% \begin{macro}{\@toaddressfont} +% \begin{macro}{\@fromaddressfont} +% \changes{v1.1}{1996/07/08}{Fixed documentation about \cs{@fromaddressfont}} +% We want the address to be printed in \textsf{\large 12pt sans serif} +% font. The return address will be printed in 10pt normal font. +% \begin{macrocode} +\def\@toaddressfont{% + \ifcase\@ptsize \large\or\normalsize\or\small\fi% + \sffamily\selectfont} +\def\@fromaddressfont{% + \ifcase\@ptsize \normalsize\or\small\or\footnotesize\fi% + \normalfont} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \subsection{Return address} +% +% \begin{macro}{\returnaddress} +% \changes{v1.2}{1997/07/13}{Deleted check for \cs{if@envelope}} +% The standard letter class defines "\returnaddress" to be null. This +% is sensible if we are printing labels, but not so good if we are +% printing \emph{envelopes}. Therefore let us redefine it: +% \begin{macrocode} +\def\returnaddress{\fromaddress} +% \end{macrocode} +% \end{macro} +% +% \subsection{Margins, page styles, etc.} +% +% +% \begin{macro}{\startlabels} +% \changes{v1.2}{1996/09/07}{Added \cs{clearpage}} +% \changes{v1.2}{1996/09/20}{Added percent signs} +% \changes{v1.2}{1997/07/10}{Moved here calculations for +% \cs{EnvelopeLeftMargin}} +% \changes{v1.2}{1997/07/10}{Added \cs{LabelLeftMargin}} +% The command "\startlabels" is the internal command that prepares +% the paper for labels or envelopes, resets the internal counters and +% calls "\@beginlabelshook". +% \begin{macrocode} +\def\startlabels{% + \clearpage% + \pagestyle{empty}% + \setlength{\topmargin}{-1.0in}% + \if@envelope% + \addtolength{\topmargin}{\EnvelopeTopMargin}% + \else \addtolength{\topmargin}{\LabelTopMargin}% + \fi% + \setlength{\headheight}{0pt}% + \setlength{\headsep}{0pt}% + \setlength{\footskip}{0pt}% + \setlength{\textheight}{200in}% + \setlength\paperheight{\textheight}% + \global\vsize=200in\relax% + \addtolength{\textheight}{-\topmargin}% + \addtolength{\textheight}{-1.0in}% + \setlength{\oddsidemargin}{-1.0in}% + \if@envelope\relax% + \else% + \addtolength{\oddsidemargin}{\LabelLeftMargin}% + \fi% + \setlength{\evensidemargin}{\oddsidemargin}% + \setlength{\textwidth}{20in}% + \hsize=20in% + \baselineskip=0pt% + \lineskip=0pt% + \parindent=0pt% + \if@envelope +% \end{macrocode} +% +% Now we can calculate "\EnvelopeLeftMargin" +% +% \begin{macrocode} + \ifcase\the\@envelopeposition% + \setlength{\EnvelopeLeftMargin}{\paperwidth}% + \if@rotateenvelopes% + \addtolength{\EnvelopeLeftMargin}{-\EnvelopeHeight}% + \else% + \addtolength{\EnvelopeLeftMargin}{-\EnvelopeWidth}% + \fi% + \setlength{\EnvelopeLeftMargin}{0.5\EnvelopeLeftMargin}% + \or% + \setlength{\EnvelopeLeftMargin}{0pt}% + \or% + \setlength{\EnvelopeLeftMargin}{\paperwidth}% + \if@rotateenvelopes% + \addtolength{\EnvelopeLeftMargin}{-\EnvelopeHeight}% + \else% + \addtolength{\EnvelopeLeftMargin}{-\EnvelopeWidth}% + \fi% + \else% + \relax% + \fi% + \else% +% \end{macrocode} +% +% Initializing labels counters\ldots +% +% \begin{macrocode} + \setcounter{LabelCountCol}{\theLabelOffsetCol}% + \setcounter{LabelCountRow}{\theLabelOffsetRow}% + \ifnum\theLabelOffsetRow>1% + \null% + \loop \vspace*{\LabelHeight}% + \addtocounter{LabelOffsetRow}{-1} \ifnum\theLabelOffsetRow>1% + \repeat% + \fi% + \ifnum\theLabelOffsetCol>1% + \loop \hspace*{\LabelWidth}\nolinebreak% + \addtocounter{LabelOffsetCol}{-1} \ifnum\theLabelOffsetCol>1% + \repeat% + \fi% + \nopagebreak% + \fi% + \spaceskip0pt\relax% + \xspaceskip 0pt\relax% + \clubpenalty=0% + \widowpenalty=0% + \raggedbottom% + \sloppy% + \setlength\hfuzz{5in}% + \setlength\vfuzz{5in}% + \ignorespaces% + \@beginlabelshook% + \@beginlabelpagehook% + \nopagebreak}% +% \end{macrocode} +% \end{macro} +% +% \subsection{Printing of the addresses} +% +% \DescribeMacro{\PrintReturnAddress} +% This macro uses the text as an argument and prints it according to +% the conventions. +% \begin{macrocode} +\newcommand{\PrintReturnAddress}[1]{% + \vspace*{\FromAddressTopMargin} + \null\hspace{\FromAddressLeftMargin} + \parbox[t][\FromAddressHeight]{\FromAddressWidth}% + {\@fromaddressfont \lineskip=1pt + \if@printreturnaddress #1\else\relax\fi}} +% \end{macrocode} +% +% \DescribeMacro{\PrintAddress} +% This macro works like "\PrintReturnAddress", with several important +% differences: it prints barcodes if necessary \emph{and} +% capitalizes the address. +% \begin{macrocode} +\newcommand{\PrintAddress}[1]{% + \vspace*{\ToAddressTopMargin} + \leavevmode + \null\hspace*{\ToAddressLeftMargin} + \parbox[t]{\ToAddressWidth}{% + \lineskip=1pt + \if@barcodes \PrintBarCode{#1} \fi + \@toaddressfont + \if@capitalizeaddress \@make@capitalize{#1} \else #1 \fi}} +% \end{macrocode} +% +% \subsection{Label setup} +% +% \begin{macro}{\PrintLabel} +% \changes{v1.2}{1996/09/20}{Added percent signs} +% This macro prints a label in a parbox +% \begin{macrocode} +\newcommand{\PrintLabel}[1]{% + \parbox[t][\LabelHeight]{\LabelWidth}{% + \PrintAddress{#1}}} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\PrintBigLabel} +% \changes{v1.2}{1997/07/13}{Wrote new command} +% This macro makes a minipage with addresses on it, similarly to +% "\PrintEnvelope" below. +% \begin{macrocode} +\newcommand{\PrintBigLabel}[2]{% + \begin{minipage}[t][\LabelHeight]{\LabelWidth}% + \baselineskip=0pt% + \lineskip=0pt% + \parindent=0pt% + \begin{center}% + \PrintReturnAddress{#1}\\% + \rule{\ToAddressWidth}{0.1pt}% + \PrintAddress{#2}% + \end{center}% + \end{minipage}} +% \end{macrocode} +% +% +% \subsection{Envelope setup} +% +% Labels include one box per label, so their setup is simple. The +% situation with envelopes is different: they contain several boxes, and +% could be rotated, centered, etc. +% +% \begin{macro}{\PrintEnvelope} +% \changes{v1.2}{1996/09/20}{Added percent signs} +% This macro makes a minipage with addresses on it. +% \begin{macrocode} +\newcommand{\PrintEnvelope}[2]{% + \begin{minipage}[t][\EnvelopeHeight]{\EnvelopeWidth}% + \baselineskip=0pt% + \lineskip=0pt% + \parindent=0pt% + \PrintReturnAddress{#1}\\% + \begin{center}% + \PrintAddress{#2}% + \end{center}% + \end{minipage}} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\@PrintEnvelope} +% The following macro checks for rotation: +% \begin{macrocode} +\newcommand{\@PrintEnvelope}[2]{% + \if@rotateenvelopes\rotatebox{90}{\PrintEnvelope{#1}{#2}}% + \else\PrintEnvelope{#1}{#2}% + \fi} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \section{Printing of envelopes and labels} +% +% \subsection{Main Command} +% +% \begin{macro}{\mlabel} +% Now we are prepared to print actual envelopes and labels. It is done by +% the "\mlabel" command. It has two forms: for labels and envelopes. +% \begin{macrocode} +\renewcommand{\mlabel}[2]{\ignorespaces% + \spaceskip 0pt\relax% + \xspaceskip 0pt\relax% +% \end{macrocode} +% +% \subsection{Printing of one envelope} +% \changes{v1.1}{1996/07/09}{Put \cs{@beginlabelpagehook} in the envelope +% printing} +% \begin{macrocode} + \if@envelope% + \leavevmode% + \hspace*{\EnvelopeLeftMargin}% + \@PrintEnvelope{#1}{#2}% + \clearpage% + \@beginlabelpagehook% +% \end{macrocode} +% \subsection{Printing of one label} +% \changes{v1.1}{1996/07/09}{Put \cs{@beginlabelpagehook} in the label +% printing} +% \changes{v1.2}{1997/07/14}{Added printing of big labels} +% \begin{macrocode} + \else% + \ignorespaces% + \ifnum\theLabelCountCol>\theLabelMaxCol% + \\\nopagebreak% + \stepcounter{LabelCountRow}% + \setcounter{LabelCountCol}{1}% + \fi% + \ifnum\theLabelCountRow>\theLabelMaxRow% + \vfill\eject\@beginlabelpagehook% + \setcounter{LabelCountRow}{1}% + \setcounter{LabelCountCol}{1}% + \fi% + \if@biglabel% + \PrintBigLabel{#1}{#2}% + \else% + \PrintLabel{#2}% + \fi% + \ignorespaces\nolinebreak% + \stepcounter{LabelCountCol}% + \fi}% +% \end{macrocode} +% \end{macro} +% +% \subsection{Printing of return labels} +% +% We print only mailing addresses on labels. The user is supposed to have +% preprinted return labels. Here we describe a utility for printing them. +% This utility should be used in a separate document. +% +% \DescribeMacro{\@numreturnlabels} +% The counter "\@numreturnlabels" stores the number of return labels to +% be printed. Note that it is a \TeX\ counter, not a \LaTeX\ one. +% \begin{macrocode} +\newcount\@numreturnlabels +% \end{macrocode} +% +% \DescribeMacro{\printreturnlabels} +% This macro has two parameters: the number of labels to be printed and +% the text that is printed. It is the same on all labels. +% \begin{macrocode} +\newcommand{\printreturnlabels}[2]{% + \@numreturnlabels=#1 + \def\@toaddressfont{\@fromaddressfont} + \@capitalizeaddressfalse + \@barcodesfalse + \startlabels + \loop \mlabel{\relax}{#2} \advance\@numreturnlabels by -1 + \ifnum\@numreturnlabels>0\repeat} +% \end{macrocode} +% +% \section{Barcodes} +% +% \subsection{Main command} +% +% The USPS Postnet codes are printed accordingly to the specifications +% Ref.~\cite{Pub25}. The scanning algorithm +% is stolen from David Carlisle's \textsf{enumerate} package~\cite{Enum}. +% +% \DescribeMacro{\PrintBarCode} +% First, we extract barcodes by the command "\@extractbarcode". Then +% we print them by "\@printbarcode". +% \begin{macrocode} +\newcommand{\PrintBarCode}[1]{% + \@extractbarcode{#1} + \@printbarcode} +% \end{macrocode} +% +% \subsection{Extraction of barcodes}\label{sec:Extract} +% \changes{v1.2}{1996/07/10}{Deleted \cs{global} from zipcode +% extracting commands} +% We define zipcode as a sequence of digits (0--9) that: +% \begin{itemize} +% \item Has no characters other than digits and dashes (-) inside it +% \item Has no bracketed groups inside it and is not bracketed itself +% \item Is the last in the address field unless "\if@alwaysbarcodes=true" +% \end{itemize} +% +% We print this sequence plus the \emph{control character}. +% The latter is defined as minus sum of digits of the +% zip code +% modulo 10 (that is, the complement of the sum of digits to a +% multiple of 10). +% +% First, some internal registers. +% \DescribeMacro{\@zipcode} +% \DescribeMacro{\@zipcodesum} +% \DescribeMacro{\@zipcodefound} +% The token list "\@zipcode" contains barcode found so far. The register +% "\@zipcodesum" first contains the sum of digits of the barcode, and +% then the control character. The +% switch "\@zipcodefound" shows whether we found zip code so far. +% \begin{macrocode} +\newtoks\@zipcode +\newcount\@zipcodesum +\newif\if@zipcodefound +% \end{macrocode} +% +% +% +% There are two modes for gobbling tokens: +% \begin{enumerate}[{State} A:] +% \item We are outside a potential zipcode sequence +% ("\if@zipcodefound=false")\label{state:notfound} +% \item We are inside a potential zipcode sequence +% ("\if@zipcodefound=true")\label{state:found} +% \end{enumerate} +% +% \begin{itemize} +% +% \item \DescribeMacro{\@endaddress} \DescribeMacro{\@finishzipcode} +% If we meet in any state the special token "\@endaddress", we +% gobble it and finish the loop. +% \begin{macrocode} +\long\def\@finishzipcode#1{} +% \end{macrocode} +% +% \item \DescribeMacro{\@firstzipcode} If we meet a number (0--9) in +% state~\ref{state:notfound}, we initialize registers, process the +% token and go to state~\ref{state:found} +% \begin{macrocode} +\long\def\@firstzipcode#1{% + \@zipcode{#1} + \@zipcodesum=#1\relax + \@zipcodefoundtrue + \@zipcodeloop} +% \end{macrocode} +% +% \item \DescribeMacro{\@continuezipcode} If we meet a number (0--9) +% in state~\ref{state:found}, we just process it. +% \begin{macrocode} +\long\def\@continuezipcode#1{% + \@zipcode=\expandafter{\the\@zipcode#1} + \advance\@zipcodesum by #1 + \@zipcodeloop} +% \end{macrocode} +% +% \item \DescribeMacro{\@dashzipcode} If we meet a dash in +% state~\ref{state:found}, we gobble it. +% \begin{macrocode} +\long\def\@dashzipcode#1{\@zipcodeloop} +% \end{macrocode} +% +% \item \DescribeMacro{\@spacezipcode} If we meet a space in any +% state, we gobble it and go to the state~\ref{state:notfound}. The +% trick is from Carlisle's \textsf{enumerate} package. +% \begin{macrocode} +\def\@spacezipcode{% + \@zipcodefoundfalse + \afterassignment\@zipcodeloop\let\EL@temp= } +% \end{macrocode} +% +% \item \DescribeMacro{\@abortzipcode} If we meet anything else in any +% mode, we gobble it and go to state~\ref{state:notfound} +% \begin{macrocode} +\long\def\@abortzipcode#1{% + \@zipcodefoundfalse + \@zipcodeloop} +% \end{macrocode} +% +% \end{itemize} +% +% +% \DescribeMacro{\@zipcodeloop} +% \DescribeMacro{\EL@temp} +% \changes{v1.2}{1997/07/14}{Changed \cs{@temp} to \cs{EL@temp} to +% avoid clashes with amsmath} +% This macro is simple. We just put the next token into "\EL@temp" and +% process it through "\@zipcodeloop@". +% \begin{macrocode} +\def\@zipcodeloop{\futurelet\EL@temp\@zipcodeloop@} +% \end{macrocode} +% +% \DescribeMacro{\@zipcodeloop@} +% \DescribeMacro{\EL@tempa} +% \changes{v1.2}{1997/07/14}{Changed \cs{@tempa} to \cs{EL@tempa} to +% avoid clashes with amsmath} +% This macro performs actual processing\dots We put the command +% that gobbles the next token into "\EL@tempa" +% \begin{macrocode} +\def\@zipcodeloop@{% + \ifx \@endaddress\EL@temp \def\EL@tempa{\@finishzipcode} \else + \ifx 0\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 1\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 2\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 3\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 4\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 5\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 6\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 7\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 8\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 9\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx -\EL@temp \if@zipcodefound \def\EL@tempa{\@dashzipcode} + \else \def\EL@tempa{\@abortzipcode} \fi \else + \ifx \@sptoken\EL@temp \def\EL@tempa{\@spacezipcode} \else + \def\EL@tempa{\@abortzipcode} + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi + \EL@tempa} +% \end{macrocode} +% +% +% \DescribeMacro{\@extractbarcode} +% The command "\@extractbarcode" puts barcode into the "\@zipcode", +% and calculates the control character (10 minus sum of the digits +% of the barcode). +% \begin{macrocode} +\long\def\@extractbarcode#1{% + \@zipcodefoundfalse + \@zipcodeloop#1\@endaddress + \if@alwaysbarcodes \@zipcodefoundtrue \fi + \if@zipcodefound + \ifnum\the\@zipcodesum>0 + \loop \advance \@zipcodesum by -10 \ifnum\the\@zipcodesum>0 + \repeat + \fi + \multiply\@zipcodesum by -1 + \fi} +% \end{macrocode} +% +% \subsection{Printing barcodes} +% +% \DescribeMacro{\@barcodewidth} +% \DescribeMacro{\@barcodeLheight} +% \DescribeMacro{\@barcodeSheight} +% \DescribeMacro{\@barcodeskip} +% First, some lengths. ``L'' and ``S'' below refer to ``long'' and +% ``short'' bars correspondingly. +% \begin{macrocode} +\newlength{\@barcodewidth} +\newlength{\@barcodeLheight} +\newlength{\@barcodeSheight} +\newlength{\@barcodeskip} +\setlength{\@barcodewidth}{0.020in} +\setlength{\@barcodeLheight}{0.125in} +\setlength{\@barcodeSheight}{0.050in} +\setlength{\@barcodeskip}{0.026in} +% \end{macrocode} +% +% \DescribeMacro{\@barL} +% \DescribeMacro{\@barS} +% The following macros print long and short bars. +% \begin{macrocode} +\DeclareRobustCommand{\@barL}{% + \rule{\@barcodewidth}{\@barcodeLheight}\hspace{\@barcodeskip}} +\DeclareRobustCommand{\@barS}{% + \rule{\@barcodewidth}{\@barcodeSheight}\hspace{\@barcodeskip}} +% \end{macrocode} +% +% \DescribeMacro{\@printonezip} +% \DescribeMacro{\@printbarcode} +% The scanning of "\@zipcode" is simpler than the scanning of the address: +% the only tokens we can meet are digits. Well, we will add an end marking +% token to the list. Let it be the letter ``S'' (from ``Stop''). +% \begin{macrocode} +\def\@printonezip#1{% + \ifx1#1\@barS\@barS\@barS\@barL\@barL\else + \ifx2#1\@barS\@barS\@barL\@barS\@barL\else + \ifx3#1\@barS\@barS\@barL\@barL\@barS\else + \ifx4#1\@barS\@barL\@barS\@barS\@barL\else + \ifx5#1\@barS\@barL\@barS\@barL\@barS\else + \ifx6#1\@barS\@barL\@barL\@barS\@barS\else + \ifx7#1\@barL\@barS\@barS\@barS\@barL\else + \ifx8#1\@barL\@barS\@barS\@barL\@barS\else + \ifx9#1\@barL\@barS\@barL\@barS\@barS\else + \ifx0#1\@barL\@barL\@barS\@barS\@barS\else + \ifx S#1\def\EL@tempa{\relax}% + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi% + \EL@tempa} +\def\@printbarcode{% + \if@zipcodefound + \mbox{% + \@barL% + \def\EL@tempa{\@printonezip}% + \expandafter\EL@tempa\the\@zipcode S% + \def\EL@tempa{\@printonezip}% + \expandafter\EL@tempa\the\@zipcodesum S% + \@barL} + \\[1ex] + \fi} +% \end{macrocode} +% +% +% +% \section{Capitalization} +% +% +% \changes{v1.2}{1996/07/10}{Deleted \cs{global} from capitalization commands} +% +% +% +% These macros process the address (actually, any string) according to the +% USPS recommendations. Specifically, they: +% \begin{itemize} +% \item Strip dots (.) and commas (,) from the address unless they are +% enclosed in brackets +% \item Make all letters uppercase +% \item Add 1pt space between letters +% \item Add 1em space between words +% \end{itemize} +% An interesting question is whether we should de-accent accented +% letters. USPS says nothing about it. In the present version accents +% are \emph{not} stripped. However due to the scanning algorithm they +% should be enclosed by brackets, like this: +% "{\u S}andor {\c C}edi". +% +% +% +% \DescribeMacro{\@addr@cap} +% We store the capitalized address in the token list "\@addr@cap". +% \begin{macrocode} +\newtoks\@addr@cap +% \end{macrocode} +% +% The following macros process the tokens one by one. +% +% \DescribeMacro{\@finishaddrcap} +% If we meet the special token "\@endaddress", we gobble it and stop. +% \begin{macrocode} +\long\def\@finishaddrcap#1{} +% \end{macrocode} +% +% \DescribeMacro{\@dotcommaaddrcap} +% If we meet comma or dot, we gobble it and do \emph{not} stop. This macro +% is also useful for gobbling \LaTeXe\ \textsf{letter} commands like +% "\voidb@x" and "\unhbox". +% \begin{macrocode} +\long\def\@dotcommaaddrcap#1{% + \@addrcaploop} +% \end{macrocode} +% +% \DescribeMacro{\@newlineaddrcap} +% If we meet "\\", we add it to the list +% \begin{macrocode} +\long\def\@newlineaddrcap#1{% + \@addr@cap=\expandafter{\the\@addr@cap #1} + \@addrcaploop} +% \end{macrocode} +% +% \DescribeMacro{\@bgroupaddrcap} +% If we meet "\bgroup", we add it to the list the complete group (uppercase) +% \begin{macrocode} +\long\def\@bgroupaddrcap#1{% + \@addr@cap=\expandafter{\the\@addr@cap {\MakeUppercase{#1}}} + \@addrcaploop} +% \end{macrocode} +% +% \DescribeMacro{\@spaceaddrcap} +% If we meet a space we gobble it (oh-oh) and add it to the list. +% \begin{macrocode} +\def\@spaceaddrcap{% + \@addr@cap=\expandafter{\the\@addr@cap\hspace{0.6em}} + \afterassignment\@addrcaploop\let\EL@temp= } +% \end{macrocode} +% +% \DescribeMacro{\@otheraddrcap} +% And if we meet anything else, we make it uppercase and add to the +% list +% \begin{macrocode} +\def\@otheraddrcap#1{% + \@addr@cap=\expandafter{\the\@addr@cap% + \MakeUppercase{#1}\kern1pt\relax} + \@addrcaploop} +% \end{macrocode} +% +% +% \DescribeMacro{\@addrcaploop} +% This macro is simple. We just put the next token into "\EL@temp" and +% process it through "\@addrcaploop@". +% \begin{macrocode} +\def\@addrcaploop{\futurelet\EL@temp\@addrcaploop@} +% \end{macrocode} +% +% \DescribeMacro{\@addrcaploop@} +% This macro performs actual processing\dots +% \begin{macrocode} +\def\@addrcaploop@{% + \ifx \@endaddress\EL@temp \def\EL@tempa{\@finishaddrcap} \else + \ifx .\EL@temp \def\EL@tempa{\@dotcommaaddrcap} \else + \ifx ,\EL@temp \def\EL@tempa{\@dotcommaaddrcap} \else + \ifx \voidb@x\EL@temp \def\EL@tempa{\@dotcommaaddrcap} \else + \ifx \unhbox\EL@temp \def\EL@tempa{\@dotcommaaddrcap} \else + \ifx \\\EL@temp \def\EL@tempa{\@newlineaddrcap} \else + \ifx \bgroup\EL@temp \def\EL@tempa{\@bgroupaddrcap} \else + \ifx \@sptoken\EL@temp \def\EL@tempa{\@spaceaddrcap} \else + \def\EL@tempa{\@otheraddrcap} + \fi\fi\fi\fi\fi\fi\fi\fi + \EL@tempa} +% \end{macrocode} +% +% \DescribeMacro{\@make@capitalize} +% \begin{macrocode} +\long\def\@make@capitalize#1{% + \@addr@cap={\relax} + \@addrcaploop#1\@endaddress + \the\@addr@cap} +% \end{macrocode} +% +% +% \section{Games with \texttt{.aux} file} +% +% The commands described in this section write something to the +% |.aux| file, and thus change the way \EL\ treats the labels and +% envelopes. Since the action is delayed till the |.aux| file is +% processed, these commands affect only the labels automatically +% extracted from the |letter| environment, and do not affect the +% labels explicitly defined by the |\mlabel| commands in the main +% file. +% +% +% \changes{v1.2}{1996/09/07}{Added \cs{@@mlabel}} +% \DescribeMacro{\@@mlabel} +% The macro |\@@mlabel| stores the status of the |\@mlabel| as +% determined by |\makelabels|. It is a no-op at the start. +% If |\makelabels| redefines |\@mlabel|, we catch it through the +% |\AtEndDocument| hook. Note that since |\makelabel| is allowed +% only in the preamble, we are not in danger of redefining commands too +% early. +% \begin{macrocode} +\let\@@mlabel=\@gobbletwo +\AtEndDocument{\let\@@mlabel=\@mlabel} +% \end{macrocode} +% +% +% The next four commands redefine |\@mlabel| to suppress or resume +% printing mailing labels. +% +% \begin{macro}{\suppresslabels} +% \changes{v1.2}{1996/09/06}{Wrote new command} +% This command suppress printing labels and envelopes until it is +% resumed by |\resumelabels| or similar commands. +% \begin{macrocode} +\def\suppresslabels{\if@filesw\immediate\write\@auxout{% + \string\@suppresslabels}\fi} +% \end{macrocode} +% +% \begin{macro}{\@suppresslabels} +% \changes{v1.2}{1996/09/07}{Deleted the \cs{AtBeginDocument} hook} +% This is the internal command that performs the actual +% processing. +% \begin{macrocode} +\def\@suppresslabels{\let\@mlabel=\@gobbletwo} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\resumelabels} +% \changes{v1.2}{1996/09/06}{Wrote new command} +% \begin{macro}{\@resumelabels} +% \changes{v1.2}{1996/09/07}{Changed \cs{mlabel} to \cs{@@mlabel} and +% deleted the \cs{AtBeginDocument} hook} +% These commands resume printing labels and envelopes if it was +% suppressed by |\suppresslabels| or similar commands. +% \begin{macrocode} +\def\resumelabels{\if@filesw\immediate\write\@auxout{% + \string\@resumelabels}\fi} +\def\@resumelabels{\let\@mlabel=\@@mlabel} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% +% \begin{macro}{\suppressonelabel} +% \changes{v1.2}{1996/06/09}{Wrote new command} +% \begin{macro}{\@suppressonelabel} +% \changes{v1.2}{1996/09/07}{Deleted the \cs{AtBeginDocument} hook} +% \begin{macro}{\@old@mlabel} +% These commands suppress printing of one label or envelope. +% The macro |\@old@mlabel| is used to store the +% system state. +% \begin{macrocode} +\def\suppressonelabel{\if@filesw\immediate\write\@auxout{% + \string\@suppressonelabel}\fi} +\def\@suppressonelabel{\let\@old@mlabel=\@mlabel% + \def\@mlabel{% + \let\@mlabel=\@old@mlabel% + \@gobbletwo}} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\printonelabel} +% \changes{v1.2}{1996/06/09}{Wrote new command} +% \begin{macro}{\@printonelabel} +% \changes{v1.2}{1996/09/07}{Changed \cs{mlabel} to \cs{@@mlabel} and +% deleted the \cs{AtBeginDocument} hook} +% These commands resume printing for one label or envelope +% The macro |\@old@mlabel| is used to store the +% system state. +% \begin{macrocode} +\def\printonelabel{\if@filesw\immediate\write\@auxout{% + \string\@printonelabel}\fi} +\def\@printonelabel{\let\@old@mlabel=\@mlabel% + \def\@mlabel{% + \let\@mlabel=\@old@mlabel% + \@@mlabel}} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% +% \begin{macro}{\ChangeEnvelope} +% \changes{v1.2}{1996/09/07}{Wrote new command} +% \begin{macro}{\@ChangeEnvelope} +% \begin{macro}{\@ChangeEnvelopeStar} +% This macro writes |\@SetEnvelope| to the |.aux| file. It has +% two forms: starred and and unstarred. In the unstarred mode it also +% writes |\@startlabels| to the |.aux| file. In the unstarred form it +% does not. +% Since we want to treat \emph{both} stars and optional arguments, we +% introduce two internal commands that can be invoked by the main +% macro. +% \begin{macrocode} +\def\ChangeEnvelope{\@ifstar{\@ChangeEnvelopeStar}{\@ChangeEnvelope}} +\newcommand\@ChangeEnvelopeStar[3][0pt]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetEnvelope[#1]{#2}{#3}}% + \fi} +\newcommand\@ChangeEnvelope[3][0pt]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetEnvelope[#1]{#2}{#3}} + \immediate\write\@auxout{\string\@startlabels} + \fi} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\@SetEnvelope} +% We define this command as no-op at beginning, and then redefine it +% before reading |.aux| file. +% \begin{macrocode} +\def\@SetEnvelope[#1]#2#3{} +\AtEndDocument{\let\@SetEnvelope=\SetEnvelope} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\ChangeLabel} +% \changes{v1.2}{1997/07/11}{Wrote new command} +% \begin{macro}{\@ChangeLabel} +% \begin{macro}{\@ChangeLabelStar} +% This macro writes |\@SetLabel| to the |.aux| file. It has +% two forms: starred and and unstarred. In the unstarred mode it also +% writes |\@startlabels| to the |.aux| file. In the unstarred form it +% does not. +% Since we want to treat \emph{both} stars and optional arguments, we +% introduce two internal commands that can be invoked by the main +% macro. +% \begin{macrocode} +\def\ChangeLabel{\@ifstar{\@ChangeLabelStar}{\@ChangeLabel}} +\newcommand\@ChangeLabelStar[7]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetLabel{#1}{#2}{#3}{#4}{#5}{#6}{#7}}% + \fi} +\newcommand\@ChangeLabel[7]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetLabel{#1}{#2}{#3}{#4}{#5}{#6}{#7}} + \immediate\write\@auxout{\string\@startlabels} + \fi} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\@SetLabel} +% We define this command as no-op at beginning, and then redefine it +% before reading |.aux| file. +% \begin{macrocode} +\def\@SetLabel#1#2#3#4#5#6#7{} +\AtEndDocument{\let\@SetLabel=\SetLabel} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\ChangeBigLabel} +% \changes{v1.2}{1997/07/13}{Wrote new command} +% \begin{macro}{\@ChangeBigLabel} +% \begin{macro}{\@ChangeBigLabelStar} +% This macro writes |\@SetBigLabel| to the |.aux| file. It has +% two forms: starred and and unstarred. In the unstarred mode it also +% writes |\@startlabels| to the |.aux| file. In the unstarred form it +% does not. +% Since we want to treat \emph{both} stars and optional arguments, we +% introduce two internal commands that can be invoked by the main +% macro. +% \begin{macrocode} +\def\ChangeBigLabel{\@ifstar{\@ChangeBigLabelStar}{\@ChangeBigLabel}} +\newcommand\@ChangeBigLabelStar[7]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetBigLabel{#1}{#2}{#3}{#4}{#5}{#6}{#7}}% + \fi} +\newcommand\@ChangeBigLabel[7]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetBigLabel{#1}{#2}{#3}{#4}{#5}{#6}{#7}} + \immediate\write\@auxout{\string\@startlabels} + \fi} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\@SetLabel} +% We define this command as no-op at beginning, and then redefine it +% before reading |.aux| file. +% \begin{macrocode} +\def\@SetBigLabel#1#2#3#4#5#6#7{} +\AtEndDocument{\let\@SetBigLabel=\SetBigLabel} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \section{Reimplementation of the \cs{opening} command} +% \DescribeMacro{\re} +% Some people like to put below the address information like +% \begin{quote} +% Re: our recent talk +% \end{quote} +% A way to do this is to include it in the address like this: +% \begin{verbatim} +% \begin{letter}{% +% Dr.~Austin Tankel\\ +% Some University\\ +% Anytown, Pa 12345\\[1ex] +% Re: Our recent talk} +% \opening{Dear Austin:} +% \end{verbatim} +% However, this additional info will be put in the mailing label, +% which is wrong. Here we describe a macro that works like this: +% \begin{verbatim} +% \begin{letter}{% +% Dr.~Austin Tankel\\ +% Some University\\ +% Anytown, Pa 12345} +% \re{Our recent talk} +% \opening{Dear Austin:} +% \end{verbatim} +% +% +% Now, the implementation. +% First, lets us check whether the option "re" is chosen (otherwise we +% don't bother to redefine the commands): +% \begin{macrocode} +\if@EL@redefine@opening +% \end{macrocode} +% +% \begin{macro}{\re} +% \changes{v1.2}{1997/07/14}{Wrote new command} +% \begin{macro}{\recontentents} +% \changes{v1.2}{1997/07/14}{Wrote new command} +% The command "\re" just defines "\recontents". Also, we initialize +% "\recontents" to be initially empty +% \begin{macrocode} + \newcommand*{\re}[1]{\def\recontents{#1}}% +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% +% \begin{macro}{\ReName} +% \changes{v1.2}{1997/07/14}{Wrote new command} +% By default it is just plain style ``Re: '' (note the space!) +% \begin{macrocode} + \def\ReName{Re: }% +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\opening} +% \changes{v1.2}{1997/07/14}{Reimplemented standard command +% \cs{opening}} +% Now we redefine the standard "\opening" command to include the "\re" +% info. Here is the quote from the standard "letter" +% class~\cite{letter}: +% \begin{quotation} +% Text is begun with the |\opening| command, whose argument +% generates the salutation, as in +%\begin{verbatim} +% \opening{Dear Henry,} +%\end{verbatim} +% This should produce everything up to and including the +% `Dear Henry,' and a |\par| command that follows. +% Since there's a |\vfil| at the bottom of every page, +% it can add vertical fill to position a short letter. +% It should use the following commands: +% \begin{itemize} +% \item |\toname| : name part of `to' address. +% Will be one line long. +% \item |\toaddress| : address part of `to' address. +% The lines separated by |\\|. +% \item |\fromname| : name of sender. +% \item |\fromaddress| : argument of current |\address| +% declaration-- null if none. Should use standard institutional +% address if null. +% \item |\fromlocation| : argument of current |\location| +% declaration--null if none. +% \item |\telephonenum| : argument of current |\telephone| +% declaration--null if none. +% \end{itemize} +% \end{quotation} +% We just "\ReName" and "\recontents" here\ldots +% \begin{macrocode} + \renewcommand*{\opening}[1]{\ifx\@empty\fromaddress + \thispagestyle{firstpage}% + {\raggedleft\@date\par}% + \else % home address + \thispagestyle{empty}% + {\raggedleft\begin{tabular}{l}\ignorespaces + \fromaddress \\*[2\parskip]% + \@date \end{tabular}\par}% + \fi + \vspace{2\parskip}% + {\raggedright \toname \\ \toaddress \par}% + \ifx\@empty\recontents\relax + \else + {\raggedright \ReName \recontents \par}% + \fi + \vspace{2\parskip}% + #1\par\nobreak}% +% \end{macrocode} +% \end{macro} +% +% Now we close \cs{if@EL@redefine@opening}: +% \begin{macrocode} +\fi +% \end{macrocode} +% +% And the last line: +% \begin{macrocode} +% +% \end{macrocode} +% +% \Finale +% +% \clearpage +% \addcontentsline{toc}{section}{\protect\refname} +% \begin{thebibliography}{1} +% \bibitem{Enum} +% David Carlisle. +% \newblock {\em The \textsf{enumerate} package}. +% \newblock {CTAN}, v2.02 edition, January 1994. +% \bibitem{letter} +% Leslie Lamport, Frank Mittelbach, and Rainer Sch{\"o}pf. +% \newblock Standard letter document class for {\LaTeX} version 2e. +% \newblock CTAN, 199c. +% \bibitem{Pub25} +% USPS. +% \newblock {\em Designing Business Letter Mail (Pub 25)}, August 1995. +% \end{thebibliography} +% +% \clearpage +% \addcontentsline{toc}{section}{Change History} +% \PrintChanges +% +% \clearpage +% \addcontentsline{toc}{section}{Index} +% \PrintIndex +% +\endinput + diff --git a/envlab.ins b/envlab.ins new file mode 100644 index 0000000..68e4ced --- /dev/null +++ b/envlab.ins @@ -0,0 +1,25 @@ +\def\batchfile{envlab.ins} +\input docstrip +\keepsilent + + +\declarepreamble\cfg + +You are allowed and encouraged to modify THIS file. + +The first part of this file contains default options for your site. +The second part (inside AtEndOfPackage declaration) should contain +customization commands specific to your site. + +Good luck + +\endpreamble + +\generate{% + \file{envlab.drv}{\from{envlab.dtx}{driver}} + \file{envlab.sty}{\from{envlab.dtx}{package}} + \usepreamble\empty\usepreamble\cfg\file{envlab.cfg}{\from{envlab.dtx}{cfg}}} + + + + diff --git a/envlab.sty b/envlab.sty new file mode 100644 index 0000000..9d63b5a --- /dev/null +++ b/envlab.sty @@ -0,0 +1,617 @@ +%% +%% This is file `envlab.sty', +%% generated with the docstrip utility. +%% +%% The original source files were: +%% +%% envlab.dtx (with options: `package') +%% +%% IMPORTANT NOTICE: +%% +%% For the copyright see the source file. +%% +%% Any modified versions of this file must be renamed +%% with new filenames distinct from envlab.sty. +%% +%% For distribution of the original source see the terms +%% for copying and modification in the file envlab.dtx. +%% +%% This generated file may be distributed as long as the +%% original source files, as listed above, are part of the +%% same distribution. (The sources need not necessarily be +%% in the same archive or directory.) +\ProvidesPackage{envlab} +[1997/07/16 v1.2 Envelopes and Labels] +%% +%% Copyright Boris Veytsman 1996, 1997 +%% +%% +%% \CharacterTable +%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z +%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z +%% Digits \0\1\2\3\4\5\6\7\8\9 +%% Exclamation \! Double quote \" Hash (number) \# +%% Dollar \$ Percent \% Ampersand \& +%% Acute accent \' Left paren \( Right paren \) +%% Asterisk \* Plus \+ Comma \, +%% Minus \- Point \. Solidus \/ +%% Colon \: Semicolon \; Less than \< +%% Equals \= Greater than \> Question mark \? +%% Commercial at \@ Left bracket \[ Backslash \\ +%% Right bracket \] Circumflex \^ Underscore \_ +%% Grave accent \` Left brace \{ Vertical bar \| +%% Right brace \} Tilde \~} +%% \changes{v1.2}{1996/07/16}{Updated User Guide} +\NeedsTeXFormat{LaTeX2e} +\def\envlab@oops{% + \PackageError{envlab}% + {Envlab is used outside of \MessageBreak% + a letter-compatible documentclass}% + {You are trying to use Envelopes & Labels\MessageBreak% + package, but your documentclass does not\MessageBreak% + understand address formatting commands.\MessageBreak% + Try standard document class letter\MessageBreak}} +\def\envlab@ok{% + \PackageInfo{envlab}% + {Envelopes & Labels package: found makelabels...\MessageBreak% + Seems everything is OK. Good luck.}} +\@ifundefined{makelabels}{\envlab@oops}{\envlab@ok} +\newif\if@envelope +\@envelopetrue +\newif\if@biglabel +\@biglabelfalse +\newif\if@rotateenvelopes +\@rotateenvelopestrue +\newif\if@printreturnaddress +\@printreturnaddresstrue +\newcount\@envelopeposition +\@envelopeposition=0\relax +\newif\if@pswait +\@pswaitfalse +\newif\if@psautotray +\@psautotrayfalse +\newtoks\PSEnvelopeTray +\PSEnvelopeTray={/otherenvelopetray } +\newif\if@barcodes +\newif\if@alwaysbarcodes +\@barcodestrue +\@alwaysbarcodesfalse +\newif\if@EL@redefine@opening +\@EL@redefine@openingfalse +\newif\if@capitalizeaddress +\@capitalizeaddresstrue +\newlength{\EnvelopeWidth} +\newlength{\EnvelopeHeight} +\newlength{\EnvelopeTopMargin} +\newlength{\EnvelopeLeftMargin} +\setlength{\EnvelopeLeftMargin}{0pt} +\newlength{\LabelWidth} +\newlength{\LabelHeight} +\newlength{\LabelTopMargin} +\newlength{\LabelLeftMargin} +\newlength{\LabelRightMargin} +\newcounter{LabelMaxCol} +\newcounter{LabelMaxRow} +\newlength{\FromAddressTopMargin} +\newlength{\FromAddressLeftMargin} +\newlength{\FromAddressHeight} +\newlength{\FromAddressWidth} +\newlength{\ToAddressTopMargin} +\newlength{\ToAddressLeftMargin} +\newlength{\ToAddressWidth} +\DeclareRobustCommand{\SetEnvelope}[3][0pt]{% + \@envelopetrue% + \@biglabelfalse% + \setlength{\EnvelopeTopMargin}{#1}% + \setlength{\EnvelopeWidth}{#2}% + \setlength{\EnvelopeHeight}{#3}% + \setlength{\FromAddressTopMargin}{0.5in}% + \setlength{\FromAddressLeftMargin}{0.5in}% + \setlength{\FromAddressHeight}{0.33\EnvelopeHeight}% + \setlength{\FromAddressWidth}{0.5\EnvelopeWidth}% + \setlength{\ToAddressTopMargin}{0.5in}% + \setlength{\ToAddressLeftMargin}{0.5in}% + \setlength{\ToAddressWidth}{3in}} +\DeclareRobustCommand{\SetLabel}[7]{% + \@envelopefalse% + \@biglabelfalse% + \setlength{\LabelWidth}{#1}% + \setlength{\LabelHeight}{#2}% + \setlength{\LabelTopMargin}{#3}% + \setlength{\LabelLeftMargin}{#4}% + \setlength{\LabelRightMargin}{#5}% + \setcounter{LabelMaxCol}{#6}% + \setcounter{LabelMaxRow}{#7}% + \setlength{\ToAddressTopMargin}{0.1in}% + \setlength{\ToAddressLeftMargin}{0.2in}% + \setlength{\ToAddressWidth}{\LabelWidth}% + \addtolength{\ToAddressWidth}{-\ToAddressLeftMargin}% + \addtolength{\ToAddressWidth}{-\LabelRightMargin}} +\DeclareRobustCommand{\SetBigLabel}[7]{% + \@envelopefalse% + \@biglabeltrue% + \setlength{\LabelWidth}{#1}% + \setlength{\LabelHeight}{#2}% + \setlength{\LabelTopMargin}{#3}% + \setlength{\LabelLeftMargin}{#4}% + \setlength{\LabelRightMargin}{#5}% + \setcounter{LabelMaxCol}{#6}% + \setcounter{LabelMaxRow}{#7}% + \setlength{\FromAddressTopMargin}{0.0in}% + \setlength{\FromAddressLeftMargin}{0.5in}% + \setlength{\FromAddressHeight}{0.33\LabelHeight}% + \setlength{\ToAddressTopMargin}{0.1in}% + \setlength{\ToAddressLeftMargin}{0.5in}% + \setlength{\ToAddressWidth}{\LabelWidth}% + \addtolength{\ToAddressWidth}{-\ToAddressLeftMargin}% + \addtolength{\ToAddressWidth}{-\LabelRightMargin}% + \setlength{\FromAddressWidth}{\ToAddressWidth}} +\DeclareOption{businessenvelope}{\SetEnvelope{9.5in}{4.125in}% + \PSEnvelopeTray={/com10envelopetray }} +\DeclareOption{executiveenvelope}{\SetEnvelope{7.5in}{3.875in}% + \PSEnvelopeTray={/monarcenvelopetray }} +\DeclareOption{bookletenvelope}{\SetEnvelope{10.5in}{7.5in}} +\DeclareOption{personalenvelope}{\SetEnvelope{6.5in}{3.625in}} +\DeclareOption{c6envelope}{\SetEnvelope{162mm}{114mm}} +\DeclareOption{c65envelope}{\SetEnvelope{224mm}{114mm}} +\DeclareOption{c5envelope}{\SetEnvelope{229mm}{162mm}% + \PSEnvelopeTray={/162x229cenvelopetray }} +\DeclareOption{dlenvelope}{\SetEnvelope{220mm}{110mm}% + \PSEnvelopeTray={/dlenvelopetray }} +\DeclareOption{avery5160label}{% + \SetLabel{2.75in}{1in}{0.5in}{0.19in}{0.12in}{3}{10}} +\DeclareOption{avery5161label}{% + \SetLabel{4.19in}{1in}{0.5in}{0.16in}{0.19in}{2}{10}} +\DeclareOption{avery5162label}{% + \SetLabel{4.19in}{1.33in}{0.83in}{0.16in}{0.19in}{2}{7}} +\DeclareOption{avery5163label}{% + \SetLabel{4.19in}{2in}{0.5in}{0.16in}{0.19in}{2}{5}} +\DeclareOption{avery5164label}{% + \SetLabel{4.19in}{3.33in}{0.5in}{0.16in}{0.19in}{2}{3}} +\DeclareOption{herma4625label}{% + \SetLabel{105mm}{42.3mm}{0mm}{5mm}{5mm}{2}{7}} +\DeclareOption{avery5262label}{% + \SetLabel{110mm}{34mm}{21mm}{4mm}{5mm}{2}{7}} +\DeclareOption{avery5163biglabel}{% + \SetBigLabel{4.19in}{2in}{0.5in}{0.16in}{0.19in}{2}{5}% + \setlength{\ToAddressTopMargin}{0.1in}}% +\DeclareOption{avery5164biglabel}{% + \SetBigLabel{4.19in}{3.33in}{0.5in}{0.16in}{0.19in}{2}{3}}% +\DeclareOption{rotateenvelopes}{\@rotateenvelopestrue} +\DeclareOption{norotateenvelopes}{\@rotateenvelopesfalse} +\DeclareOption{centerenvelopes}{\@envelopeposition=0\relax} +\DeclareOption{leftenvelopes}{\@envelopeposition=1\relax} +\DeclareOption{rightenvelopes}{\@envelopeposition=2\relax} +\DeclareOption{customenvelopes}{\@envelopeposition=3\relax} +\DeclareOption{printbarcodes}{\@barcodestrue} +\DeclareOption{noprintbarcodes}{\@barcodesfalse\@alwaysbarcodesfalse} +\DeclareOption{alwaysbarcodes}{\@alwaysbarcodestrue\@barcodestrue} +\DeclareOption{noalwaysbarcodes}{\@alwaysbarcodesfalse} +\DeclareOption{capaddress}{\@capitalizeaddresstrue} +\DeclareOption{nocapaddress}{\@capitalizeaddressfalse} +\DeclareOption{printreturnaddress}{\@printreturnaddresstrue} +\DeclareOption{noprintreturnaddress}{\@printreturnaddressfalse} +\DeclareOption{pswait}{\@pswaittrue\@psautotrayfalse} +\DeclareOption{nopswait}{\@pswaitfalse} +\DeclareOption{psautotray}{\@psautotraytrue\@pswaitfalse} +\DeclareOption{nopsautotray}{\@psautotrayfalse} +\DeclareOption{re}{\@EL@redefine@openingtrue} +\DeclareOption{nore}{\@EL@redefine@openingfalse} +\DeclareOption*{\PassOptionsToPackage{\CurrentOption}{graphics}} +\ExecuteOptions{businessenvelope,rotateenvelopes,centerenvelopes} +\ExecuteOptions{printbarcodes,capaddress} +\ExecuteOptions{nopswait,printreturnaddress,nopsautotray,nore} +\InputIfFileExists{envlab.cfg}{% + \typeout{Loading configuration file envlab.cfg}}{% + \typeout{Configuration file envlab.cfg is not found}} +\ProcessOptions +\IfFileExists{graphics.sty}{% + \RequirePackage{graphics}}{% + \PackageWarning{envlab}{% + You don't have the graphics package!\MessageBreak + Probably you will not be able to print\MessageBreak + envelopes sidewise. \MessageBreak}} +\def\@beginlabelshook{\relax} +\def\@beginlabelpagehook{\relax} +\def\AtBeginLabels{\g@addto@macro\@beginlabelshook} +\def\AtBeginLabelPage{\g@addto@macro\@beginlabelpagehook} +\def\PSwait{\special{ps: clear grestore @manualfeed 0 0 bop}} +\edef\PSautotray{% + \special{ps:clear grestore + statusdict begin false setduplexmode + /manualfeed true def + \the\PSEnvelopeTray end 0 0 bop }} +\if@pswait + \AtBeginLabels{\PSwait}% +\else + \if@psautotray + \AtBeginLabels{\PSautotray}% + \fi +\fi +\newcounter{LabelCountCol} +\newcounter{LabelCountRow} +\newcounter{LabelOffsetCol} +\newcounter{LabelOffsetRow} +\setcounter{LabelOffsetCol}{1} +\setcounter{LabelOffsetRow}{1} +\DeclareRobustCommand{\FirstLabel}[2]{% + \setcounter{LabelOffsetRow}{#1}% + \setcounter{LabelOffsetCol}{#2}} +\def\@toaddressfont{% + \ifcase\@ptsize \normalsize\or\small\fi% + \rmfamily\selectfont} +\def\@fromaddressfont{% + \ifcase\@ptsize \normalsize\or\small\or\footnotesize\fi% + \normalfont} +\def\returnaddress{\fromaddress} +\def\startlabels{% + \clearpage% + \pagestyle{empty}% + \setlength{\topmargin}{-1.0in}% + \if@envelope% + \addtolength{\topmargin}{\EnvelopeTopMargin}% + \else \addtolength{\topmargin}{\LabelTopMargin}% + \fi% + \setlength{\headheight}{0pt}% + \setlength{\headsep}{0pt}% + \setlength{\footskip}{0pt}% + \setlength{\textheight}{200in}% + \setlength\paperheight{\textheight}% + \global\vsize=200in\relax% + \addtolength{\textheight}{-\topmargin}% + \addtolength{\textheight}{-1.0in}% + \setlength{\oddsidemargin}{-1.0in}% + \if@envelope\relax% + \else% + \addtolength{\oddsidemargin}{\LabelLeftMargin}% + \fi% + \setlength{\evensidemargin}{\oddsidemargin}% + \setlength{\textwidth}{20in}% + \hsize=20in% + \baselineskip=0pt% + \lineskip=0pt% + \parindent=0pt% + \if@envelope + \ifcase\the\@envelopeposition% + \setlength{\EnvelopeLeftMargin}{\paperwidth}% + \if@rotateenvelopes% + \addtolength{\EnvelopeLeftMargin}{-\EnvelopeHeight}% + \else% + \addtolength{\EnvelopeLeftMargin}{-\EnvelopeWidth}% + \fi% + \setlength{\EnvelopeLeftMargin}{0.5\EnvelopeLeftMargin}% + \or% + \setlength{\EnvelopeLeftMargin}{0pt}% + \or% + \setlength{\EnvelopeLeftMargin}{\paperwidth}% + \if@rotateenvelopes% + \addtolength{\EnvelopeLeftMargin}{-\EnvelopeHeight}% + \else% + \addtolength{\EnvelopeLeftMargin}{-\EnvelopeWidth}% + \fi% + \else% + \relax% + \fi% + \else% + \setcounter{LabelCountCol}{\theLabelOffsetCol}% + \setcounter{LabelCountRow}{\theLabelOffsetRow}% + \ifnum\theLabelOffsetRow>1% + \null% + \loop \vspace*{\LabelHeight}% + \addtocounter{LabelOffsetRow}{-1} \ifnum\theLabelOffsetRow>1% + \repeat% + \fi% + \ifnum\theLabelOffsetCol>1% + \loop \hspace*{\LabelWidth}\nolinebreak% + \addtocounter{LabelOffsetCol}{-1} \ifnum\theLabelOffsetCol>1% + \repeat% + \fi% + \nopagebreak% + \fi% + \spaceskip0pt\relax% + \xspaceskip 0pt\relax% + \clubpenalty=0% + \widowpenalty=0% + \raggedbottom% + \sloppy% + \setlength\hfuzz{5in}% + \setlength\vfuzz{5in}% + \ignorespaces% + \@beginlabelshook% + \@beginlabelpagehook% + \nopagebreak}% +\newcommand{\PrintReturnAddress}[1]{% + \vspace*{\FromAddressTopMargin} + \null\hspace{\FromAddressLeftMargin} + \parbox[t][\FromAddressHeight]{\FromAddressWidth}% + {\@fromaddressfont \lineskip=1pt + \if@printreturnaddress #1\else\relax\fi}} +\newcommand{\PrintAddress}[1]{% + \vspace*{\ToAddressTopMargin} + \leavevmode + \null\hspace*{\ToAddressLeftMargin} + \parbox[t]{\ToAddressWidth}{% + \lineskip=1pt + \if@barcodes \PrintBarCode{#1} \fi + \@toaddressfont + \if@capitalizeaddress \@make@capitalize{#1} \else #1 \fi}} +\newcommand{\PrintLabel}[1]{% + \parbox[t][\LabelHeight]{\LabelWidth}{% + \PrintAddress{#1}}} +\newcommand{\PrintBigLabel}[2]{% + \begin{minipage}[t][\LabelHeight]{\LabelWidth}% + \baselineskip=0pt% + \lineskip=0pt% + \parindent=0pt% + \begin{center}% + \PrintReturnAddress{#1}\\% + \rule{\ToAddressWidth}{0.1pt}% + \PrintAddress{#2}% + \end{center}% + \end{minipage}} +\newcommand{\PrintEnvelope}[2]{% + \begin{minipage}[t][\EnvelopeHeight]{\EnvelopeWidth}% + \baselineskip=0pt% + \lineskip=0pt% + \parindent=0pt% + \PrintReturnAddress{#1}\\% + \begin{center}% + \PrintAddress{#2}% + \end{center}% + \end{minipage}} +\newcommand{\@PrintEnvelope}[2]{% + \if@rotateenvelopes\rotatebox{90}{\PrintEnvelope{#1}{#2}}% + \else\PrintEnvelope{#1}{#2}% + \fi} +\renewcommand{\mlabel}[2]{\ignorespaces% + \spaceskip 0pt\relax% + \xspaceskip 0pt\relax% + \if@envelope% + \leavevmode% + \hspace*{\EnvelopeLeftMargin}% + \@PrintEnvelope{#1}{#2}% + \clearpage% + \@beginlabelpagehook% + \else% + \ignorespaces% + \ifnum\theLabelCountCol>\theLabelMaxCol% + \\\nopagebreak% + \stepcounter{LabelCountRow}% + \setcounter{LabelCountCol}{1}% + \fi% + \ifnum\theLabelCountRow>\theLabelMaxRow% + \vfill\eject\@beginlabelpagehook% + \setcounter{LabelCountRow}{1}% + \setcounter{LabelCountCol}{1}% + \fi% + \if@biglabel% + \PrintBigLabel{#1}{#2}% + \else% + \PrintLabel{#2}% + \fi% + \ignorespaces\nolinebreak% + \stepcounter{LabelCountCol}% + \fi}% +\newcount\@numreturnlabels +\newcommand{\printreturnlabels}[2]{% + \@numreturnlabels=#1 + \def\@toaddressfont{\@fromaddressfont} + \@capitalizeaddressfalse + \@barcodesfalse + \startlabels + \loop \mlabel{\relax}{#2} \advance\@numreturnlabels by -1 + \ifnum\@numreturnlabels>0\repeat} +\newcommand{\PrintBarCode}[1]{% + \@extractbarcode{#1} + \@printbarcode} +\newtoks\@zipcode +\newcount\@zipcodesum +\newif\if@zipcodefound +\long\def\@finishzipcode#1{} +\long\def\@firstzipcode#1{% + \@zipcode{#1} + \@zipcodesum=#1\relax + \@zipcodefoundtrue + \@zipcodeloop} +\long\def\@continuezipcode#1{% + \@zipcode=\expandafter{\the\@zipcode#1} + \advance\@zipcodesum by #1 + \@zipcodeloop} +\long\def\@dashzipcode#1{\@zipcodeloop} +\def\@spacezipcode{% + \@zipcodefoundfalse + \afterassignment\@zipcodeloop\let\EL@temp= } +\long\def\@abortzipcode#1{% + \@zipcodefoundfalse + \@zipcodeloop} +\def\@zipcodeloop{\futurelet\EL@temp\@zipcodeloop@} +\def\@zipcodeloop@{% + \ifx \@endaddress\EL@temp \def\EL@tempa{\@finishzipcode} \else + \ifx 0\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 1\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 2\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 3\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 4\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 5\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 6\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 7\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 8\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx 9\EL@temp \if@zipcodefound \def\EL@tempa{\@continuezipcode} + \else \def\EL@tempa{\@firstzipcode} \fi \else + \ifx -\EL@temp \if@zipcodefound \def\EL@tempa{\@dashzipcode} + \else \def\EL@tempa{\@abortzipcode} \fi \else + \ifx \@sptoken\EL@temp \def\EL@tempa{\@spacezipcode} \else + \def\EL@tempa{\@abortzipcode} + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi + \EL@tempa} +\long\def\@extractbarcode#1{% + \@zipcodefoundfalse + \@zipcodeloop#1\@endaddress + \if@alwaysbarcodes \@zipcodefoundtrue \fi + \if@zipcodefound + \ifnum\the\@zipcodesum>0 + \loop \advance \@zipcodesum by -10 \ifnum\the\@zipcodesum>0 + \repeat + \fi + \multiply\@zipcodesum by -1 + \fi} +\newlength{\@barcodewidth} +\newlength{\@barcodeLheight} +\newlength{\@barcodeSheight} +\newlength{\@barcodeskip} +\setlength{\@barcodewidth}{0.020in} +\setlength{\@barcodeLheight}{0.125in} +\setlength{\@barcodeSheight}{0.050in} +\setlength{\@barcodeskip}{0.026in} +\DeclareRobustCommand{\@barL}{% + \rule{\@barcodewidth}{\@barcodeLheight}\hspace{\@barcodeskip}} +\DeclareRobustCommand{\@barS}{% + \rule{\@barcodewidth}{\@barcodeSheight}\hspace{\@barcodeskip}} +\def\@printonezip#1{% + \ifx1#1\@barS\@barS\@barS\@barL\@barL\else + \ifx2#1\@barS\@barS\@barL\@barS\@barL\else + \ifx3#1\@barS\@barS\@barL\@barL\@barS\else + \ifx4#1\@barS\@barL\@barS\@barS\@barL\else + \ifx5#1\@barS\@barL\@barS\@barL\@barS\else + \ifx6#1\@barS\@barL\@barL\@barS\@barS\else + \ifx7#1\@barL\@barS\@barS\@barS\@barL\else + \ifx8#1\@barL\@barS\@barS\@barL\@barS\else + \ifx9#1\@barL\@barS\@barL\@barS\@barS\else + \ifx0#1\@barL\@barL\@barS\@barS\@barS\else + \ifx S#1\def\EL@tempa{\relax}% + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi% + \EL@tempa} +\def\@printbarcode{% + \if@zipcodefound + \mbox{% + \@barL% + \def\EL@tempa{\@printonezip}% + \expandafter\EL@tempa\the\@zipcode S% + \def\EL@tempa{\@printonezip}% + \expandafter\EL@tempa\the\@zipcodesum S% + \@barL} + \\[1ex] + \fi} +\newtoks\@addr@cap +\long\def\@finishaddrcap#1{} +\long\def\@dotcommaaddrcap#1{% + \@addrcaploop} +\long\def\@newlineaddrcap#1{% + \@addr@cap=\expandafter{\the\@addr@cap #1} + \@addrcaploop} +\long\def\@bgroupaddrcap#1{% + \@addr@cap=\expandafter{\the\@addr@cap {\MakeUppercase{#1}}} + \@addrcaploop} +\def\@spaceaddrcap{% + \@addr@cap=\expandafter{\the\@addr@cap\hspace{0.6em}} + \afterassignment\@addrcaploop\let\EL@temp= } +\def\@otheraddrcap#1{% + \@addr@cap=\expandafter{\the\@addr@cap% + \MakeUppercase{#1}\kern1pt\relax} + \@addrcaploop} +\def\@addrcaploop{\futurelet\EL@temp\@addrcaploop@} +\def\@addrcaploop@{% + \ifx \@endaddress\EL@temp \def\EL@tempa{\@finishaddrcap} \else + \ifx .\EL@temp \def\EL@tempa{\@dotcommaaddrcap} \else + \ifx ,\EL@temp \def\EL@tempa{\@dotcommaaddrcap} \else + \ifx \voidb@x\EL@temp \def\EL@tempa{\@dotcommaaddrcap} \else + \ifx \unhbox\EL@temp \def\EL@tempa{\@dotcommaaddrcap} \else + \ifx \\\EL@temp \def\EL@tempa{\@newlineaddrcap} \else + \ifx \bgroup\EL@temp \def\EL@tempa{\@bgroupaddrcap} \else + \ifx \@sptoken\EL@temp \def\EL@tempa{\@spaceaddrcap} \else + \def\EL@tempa{\@otheraddrcap} + \fi\fi\fi\fi\fi\fi\fi\fi + \EL@tempa} +\long\def\@make@capitalize#1{% + \@addr@cap={\relax} + \@addrcaploop#1\@endaddress + \the\@addr@cap} +\let\@@mlabel=\@gobbletwo +\AtEndDocument{\let\@@mlabel=\@mlabel} +\def\suppresslabels{\if@filesw\immediate\write\@auxout{% + \string\@suppresslabels}\fi} +\def\@suppresslabels{\let\@mlabel=\@gobbletwo} +\def\resumelabels{\if@filesw\immediate\write\@auxout{% + \string\@resumelabels}\fi} +\def\@resumelabels{\let\@mlabel=\@@mlabel} +\def\suppressonelabel{\if@filesw\immediate\write\@auxout{% + \string\@suppressonelabel}\fi} +\def\@suppressonelabel{\let\@old@mlabel=\@mlabel% + \def\@mlabel{% + \let\@mlabel=\@old@mlabel% + \@gobbletwo}} +\def\printonelabel{\if@filesw\immediate\write\@auxout{% + \string\@printonelabel}\fi} +\def\@printonelabel{\let\@old@mlabel=\@mlabel% + \def\@mlabel{% + \let\@mlabel=\@old@mlabel% + \@@mlabel}} +\def\ChangeEnvelope{\@ifstar{\@ChangeEnvelopeStar}{\@ChangeEnvelope}} +\newcommand\@ChangeEnvelopeStar[3][0pt]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetEnvelope[#1]{#2}{#3}}% + \fi} +\newcommand\@ChangeEnvelope[3][0pt]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetEnvelope[#1]{#2}{#3}} + \immediate\write\@auxout{\string\@startlabels} + \fi} +\def\@SetEnvelope[#1]#2#3{} +\AtEndDocument{\let\@SetEnvelope=\SetEnvelope} +\def\ChangeLabel{\@ifstar{\@ChangeLabelStar}{\@ChangeLabel}} +\newcommand\@ChangeLabelStar[7]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetLabel{#1}{#2}{#3}{#4}{#5}{#6}{#7}}% + \fi} +\newcommand\@ChangeLabel[7]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetLabel{#1}{#2}{#3}{#4}{#5}{#6}{#7}} + \immediate\write\@auxout{\string\@startlabels} + \fi} +\def\@SetLabel#1#2#3#4#5#6#7{} +\AtEndDocument{\let\@SetLabel=\SetLabel} +\def\ChangeBigLabel{\@ifstar{\@ChangeBigLabelStar}{\@ChangeBigLabel}} +\newcommand\@ChangeBigLabelStar[7]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetBigLabel{#1}{#2}{#3}{#4}{#5}{#6}{#7}}% + \fi} +\newcommand\@ChangeBigLabel[7]{% + \if@filesw\immediate\write\@auxout{% + \string\@SetBigLabel{#1}{#2}{#3}{#4}{#5}{#6}{#7}} + \immediate\write\@auxout{\string\@startlabels} + \fi} +\def\@SetBigLabel#1#2#3#4#5#6#7{} +\AtEndDocument{\let\@SetBigLabel=\SetBigLabel} +\if@EL@redefine@opening + \newcommand*{\re}[1]{\def\recontents{#1}}% + \def\ReName{Re: }% + \renewcommand*{\opening}[1]{\ifx\@empty\fromaddress + \thispagestyle{firstpage}% + {\raggedleft\@date\par}% + \else % home address + \thispagestyle{empty}% + {\raggedleft\begin{tabular}{l}\ignorespaces + \fromaddress \\*[2\parskip]% + \@date \end{tabular}\par}% + \fi + \vspace{2\parskip}% + {\raggedright \toname \\ \toaddress \par}% + \ifx\@empty\recontents\relax + \else + {\raggedright \ReName \recontents \par}% + \fi + \vspace{2\parskip}% + #1\par\nobreak}% +\fi +\endinput +%% +%% End of file `envlab.sty'. diff --git a/figures/mitlogo.pdf b/figures/mitlogo.pdf new file mode 100644 index 0000000..76fb1f7 Binary files /dev/null and b/figures/mitlogo.pdf differ diff --git a/mitletter3.cls b/mitletter3.cls new file mode 100644 index 0000000..79255ba --- /dev/null +++ b/mitletter3.cls @@ -0,0 +1,141 @@ +\NeedsTeXFormat{LaTeX2e} +\ProvidesClass{mitletter3} +\DeclareOption*{\PassOptionsToClass{\CurrentOption}{letter}} +\ProcessOptions +\LoadClass{letter} +\usepackage{graphicx} +\usepackage[businessenvelope]{envlab} + +\usepackage{color} +\usepackage[usenames,dvipsnames,svgnames,table]{xcolor} +\definecolor{mitred}{RGB}{128,0,0} + +\raggedright + +\setlength{\topmargin}{-.80in} +\setlength{\oddsidemargin}{-.25in} +\setlength{\evensidemargin}{-.25in} +\setlength{\textwidth}{7in} +\setlength{\textheight}{8.3in} +\setlength{\headsep}{1in} +\setlength{\footskip}{0.45in} + +\DeclareFixedFont{\boldfont}{OT1}{cmss}{bx}{n}{8} +\DeclareFixedFont{\regularfont}{OT1}{cmss}{m}{n}{8} + \DeclareFixedFont{\italicfont}{OT1}{cmr}{m}{it}{10} + +\renewcommand*{\opening}[1]{\ifx\@empty\fromaddress + \thispagestyle{firstpage}% + {\raggedleft\@date\par}% + \else % home address + \thispagestyle{empty}% + {\raggedleft\begin{tabular}{l@{}}\ignorespaces + \fromaddress \\*[2\parskip]% + \@date \end{tabular}\par}% + \fi + \vspace{2\parskip}% + {\raggedright \toname \\ \toaddress \par}% + \vspace{2\parskip}% + #1\par\nobreak} +\renewcommand{\ps@headings}{% + \renewcommand{\@evenfoot}{\usebox{\footer}} + \renewcommand{\@oddfoot}{\usebox{\footer}} + \def\@oddhead{\slshape\headtoname{} \ignorespaces\toname + \hfil \pagename{} \thepage}% + \let\@evenhead\@oddhead} +\renewcommand*{\opening}[1]{\ifx\@empty\fromaddress + \thispagestyle{firstpage}% + \@date\\% + \else % home address + \thispagestyle{empty}% + {\raggedleft\begin{tabular}{l@{}}\ignorespaces + \fromaddress \\*[2\parskip]% + \@date \end{tabular}\par}% + \fi + \vspace{2\parskip}% + {\raggedright \toname \\ \toaddress \par}% + \vspace{2\parskip}% + #1\par\nobreak} +\renewcommand*{\signature}[1]{\def\fromsig{#1}} +\newcommand{\officename}{MIT Sloan School of Management\\MIT Media Lab} +\newcommand{\associateofficename}{} +\newcommand{\roomnumber}{E62-341} +\newcommand{\phonenum}{206.409.7191} +\newcommand{\faxnum}{815.361.7509} +\newcommand{\website}{http://mako.cc/academic/} +\newcommand{\email}{mako@mit.edu} +\newcommand{\person}{Benjamin Mako Hill} +\newcommand{\ID}{\officename} +\newsavebox{\OfficeStuff} +\newsavebox{\MITlogo} +\newsavebox{\contactinfo} +\newsavebox{\phonestuff} + + +\sbox{\OfficeStuff} + {\parbox[t]{7.41cm}{\setlength{\baselineskip}{9.2pt}{\boldfont \person}\\\regularfont{\officename}}} + +\sbox{\MITlogo} + {\parbox[t]{2.19cm} + {\raisebox{-7mm}{\scalebox{.3}{\includegraphics{figures/mitlogo.pdf}}}}} +\sbox{\contactinfo} + {\parbox[t]{7.37cm} + {\setlength{\baselineskip}{9.2pt}\vspace{-0.8em}{\boldfont{\color{mitred} Massachusetts Institute of Technology}}\\ + \regularfont{77 Massachusetts Avenue, \roomnumber\\ + Cambridge, Massachusetts 02139-4307}}} +\sbox{\phonestuff} + {\parbox[t]{7.37cm}{\setlength{\baselineskip}{9.2pt}\regularfont{Phone\hspace{2mm}\phonenum\\Fax\hspace{5.5mm}\faxnum\\Email\hspace{2mm} \email\\\website}}} +\newsavebox{\nameandtitle} +\sbox{\nameandtitle} + {\parbox[t]{3in}{\setlength{\baselineskip}{9.2pt}}} +\newsavebox{\header} +\arrayrulecolor{mitred} +\setlength{\arrayrulewidth}{2pt} +\sbox{\header} + {\parbox[t]{\textwidth} + {\begin{tabular*}{\textwidth}{lll@{\extracolsep{\fill}}} + \usebox{\OfficeStuff} & \raisebox{.05in}{\usebox{\MITlogo}} & \usebox{\contactinfo} \\ + &&\\ + \hline\\ + \usebox{\nameandtitle}&&\usebox{\phonestuff} + \end{tabular*}}} + +\newsavebox{\footer} + +\sbox{\footer} + {\parbox[t]{\textwidth}{\textcolor{mitred}{\rule{\textwidth}{3mm}}}} +\newsavebox{\envpic} +\sbox{\envpic} + {\parbox[t]{.75in} + {\scalebox{.33}{\includegraphics{figures/mitlogo.pdf}}}} +\newsavebox{\envtop} +\sbox{\envtop} + {\parbox[t]{2.5in} + {\setlength{\baselineskip}{9.2pt}\boldfont{{\color{mitred} \officename}\\\associateofficename}}} + +\newsavebox{\envbottom} +\sbox{\envbottom} + {\parbox[b]{2.5in} + {\setlength{\baselineskip}{9.2pt}\boldfont{\color{mitred} Massachusetts Institute of Technology}\\\regularfont{77 Massachusetts Avenue, Building \roomnumber}\\\regularfont{Cambridge, MA 02139-4307}}} + +\newsavebox{\envelope} +\sbox{\envelope} + {\parbox[t]{3.25in} + {\hspace{.75in}\raisebox{.125in}{\usebox{\envtop}}\\\textcolor{mitred}{\rule{3.25in}{2pt}}\\\\\usebox{\envpic}\usebox{\envbottom}}} + +\renewcommand{\returnaddress}{\protect\usebox{\envelope}} + +%make sure the header goes on the first page +\renewcommand{\ps@firstpage} + {\setlength{\headheight}{70pt}\setlength{\headsep}{25pt}% + \renewcommand{\@oddhead}{\usebox{\header}}% + \renewcommand{\@evenhead}{}\renewcommand{\@evenfoot}{\usebox{\footer}}\renewcommand{\@oddfoot}{\usebox{\footer}}} +\renewcommand{\ps@plain}{% +\renewcommand{\@evenfoot}{\usebox{\footer}}\renewcommand{\@oddfoot}{\usebox{\footer}} +} + +\providecommand{\@evenhead}{}\providecommand{\@oddhead}{} +\providecommand{\@evenfoot}{}\providecommand{\@oddfoot}{} + + +\pagestyle{headings} diff --git a/uw_comm_cover.tex b/uw_comm_cover.tex new file mode 100644 index 0000000..15737c9 --- /dev/null +++ b/uw_comm_cover.tex @@ -0,0 +1,194 @@ +\documentclass{mitletter3} + +\usepackage{ucs} +\usepackage[utf8x]{inputenc} + +\usepackage[T1]{fontenc} +\usepackage{textcomp} +\renewcommand{\rmdefault}{ugm} +\renewcommand{\sfdefault}{phv} +\usepackage[garamond]{mathdesign} + +\makelabels +\begin{document} +\name{\person} +\signature{\person\\ {\it \ID}} + +\begin{letter}{Prof. Patricia Moy\\ +Christy Cressey Professor of Communication\\ +University of Washington\\ +Box: 353740\\ +Seattle, WA 98195} + +\opening{Dear Professor Patricia Moy and the Assistant Professor + Search Committee,} + +\baselineskip 13.5pt + +I am writing to apply for a position as Assistant Professor of +Communication at the University of Washington. I have also included +the latest version of my curriculum vitæ. Letters of recommendation +from Professors Eric von Hippel, Yochai Benkler, Tom Malone, and Mitch +Resnick will arrive separately. As per the posted job notice, I have +not included writing samples but will happily provide them upon +request. + +My research and teaching interests are the social impact of +communication and information technologies, collective action, and +``big data'' quantitative research methods. Before graduate school, I +worked as a computer programmer and entrepreneur in volunteer-driven +``peer production'' projects. Some of my efforts -- like the +\emph{Ubuntu GNU/Linux} operating system which I helped found and +which is now used by over twelve million people, and \emph{Wikipedia} +where I contribute actively and serve on its non-profit advisory board +-- have become inspirational examples of the productive power of +online collective action. That said, through a series of less +successful ventures, I also learned that most similar attempts never +get off the ground. I returned to graduate school to learn how to +answer why. + + +I study collective action in online communities and seek to understand +why some attempts at collaborative production -- like Wikipedia and +Linux -- build large volunteer communities while the vast majority +never attract even a second contributor. I am particularly interested +in how the design of communication and information technologies shape +fundamental social outcomes with broad theoretical and practical +implications -- like the decision to join a community or contribute to +a public good. My research is deeply interdisciplinary, consists +primarily of ``big data'' quantitative analyses, and lies at the +intersection of communication, sociology, and human-computer +interaction. + +One major feature of my research is the comparison of failures to +build communities to rare successful attempts. The vast majority of +previous work on collective action -- on and offline -- has selected +on the dependent variable by only studying projects that +successfully mobilize volunteers. In one working paper, I compare +Wikipedia to seven attempts to create online collaborative +encyclopedia projects that were launched previously and propose four +hypotheses to explain why Wikipedia attracted many more +contributors. I have also followed this strategy in a series of +quantitative studies of the Scratch online community: a public website +where millions of users create, share, and collaborate on interactive +media. In one study, co-authored with Andrés Monroy-Hernández and +forthcoming in \emph{American Behavioral Scientist}, I test and find +support for several widely cited theories but also show that factors +associated with more collaboration are also associated with less +original and transformative types of joint-work. In an in-progress +analysis of a new dataset I have created from 80,000 attempts at +wikis, I have tested and found little support for a widely cited +ecological model of collective action from sociology that treats +volunteer labor as a fixed and finite resource. By looking at +failures, these studies provide tests of several of the most +influential theories of the conditions for collective action, suggest +important practical and theoretical limitations to existing models, +and point to previously untheorized mechanisms. + +A second major theme in my research is attention to the role of +reputation and status in the mobilization of volunteers. In a study of +status-based awards in Wikipedia called ``barnstars'' -- a +collaboration with Aaron Shaw and Yochai Benkler -- I provide an +empirical test of an influential status-based theory of collective +action from sociology and find that it is supported only for a +sub-population of contributors who show off their awards. In another +study of Scratch, written with a team at Microsoft Research and +nominated for best paper at the \emph{CHI 2011} conference, I present +both a quantitative analysis of a design change and in-depth +interviews of users to show that credit-giving is ineffective when it +stems from an automated system because systems fail to reinforce +status-ordering with credible human expressions of social deference +and gratitude. These studies, and my other work on status, suggest +important limits to previous theoretical work on status as a motivator +for collective action, and describe a more nuanced theoretical model. + +A third theme in my research is the analysis of design changes as +``natural experiments'' to offer a deeper, and often causal, +understanding from observational data. For example, in a study +evaluating the impact of status-based incentives to collaborate in +Scratch, I treat the creation of a new ``leaderboard'' for +collaboration as a exogenous ``shock.'' Framed in terms of motivation +crowding theory, the study finds that increased status for the +creators of collaborative projects resulted in more collaboration but +also caused a decrease in the amount of total effort exerted by +contributors. In other work with Leah Buechley published at +\emph{Design of Interactive Systems}, I have analyzed sales records of +hobbyist microcontrollers to argue that relatively simple design +changes in the \emph{LilyPad Arduino} -- a electronics toolkit +minimally re-designed for women and girls -- led to large increases in +the proportion of female contributors and drastic shifts in the type +of projects created. In addition to the important theoretical findings +in both studies, this type of work represents an important +methodological advance in that it allows for stronger causal claims +while also closing the gap between theory and design. + +In a new stream of work, I am using my existing datasets to compare +the performance of collaborative production to individually produced +works to understand when successful collection action leads to better +products -- and when it does not. For example, in an analysis using +data from Scratch which is currently under review at \emph{Computer + Supported Cooperative Work} -- done in collaboration with +Monroy-Hernández -- I find important limitations of collaboration +through remixing in regards to project quality, particularly for more +artistic or media-intensive works. These findings call into question +the wide applicability of the basic assumption in peer production that +collaboration leads to high performance and points to important areas +for improvement in the design of online community software. + +As is clear in my vitæ, my work is deeply interdisciplinary. My PhD is +from a self-designed interdepartmental program that brings together +social science faculty at the Sloan School of Management with design +and engineering faculty at the MIT Media Lab. I have collaborated with +co-authors across a range of academic departments. And although the +bulk of my current work is targeted at journals in communication and +sociology, my vitæ lists publications in social science, computer +science, and media studies. It also shows an eclectic and successful +record of fundraising. I have been generously funded by Sloan, the +Media Lab, the Berkman Center for Internet and Society at Harvard +University, and the NSF. I have successfully sought additional funding +for research assistants and computational resources with grants from +Amazon, Cisco, and MTV/Viacom. + +I also have experience and a passion for teaching. In addition to +acting as a teaching assistant, mentor, and advisor to undergraduate +and masters students, I am, to my knowledge, the only current PhD +student that is routinely invited to lecture in MIT Sloan's Executive +Education and Visiting MBA programs. Your department's undergraduate +courses on \emph{Computer-Mediated Communication} and +\emph{Organizational Communication} are both good matches for my +expertise as are your graduate courses on \emph{Theories of Technology + and Society}, quantitative research methods, and your course on +\emph{Internet Research}. With my experience with successful startups +and in executive education, I would be also be well positioned to +teach in your \emph{Masters in Communication in Digital Media} +program. + +Although the large majority of my energy is put toward research, +teaching, and service, my vitæ also shows evidence of the value that I +place on my role as a public intellectual. I blog actively for a +regular audience of thousands of readers and give regular talks at +conferences and universities around the world on my research. I am a +board member of the Free Software Foundation, sit on the advisory +board of the Wikimedia Foundation, and have advised One Laptop per +Child and several other organizations. + +I grew up in Seattle and love the city. Many years ago, I was +recruited by John Gastil to study as a doctoral student in your +department. Although I chose a different path, I have maintained and +fostered warm collegial relationships with several members of your +faculty and with others at University of Washington. Based on these +experiences, I believe that my skills would be an excellent match for +this job and for your department. I hope that you will consider giving +me an opportunity to join you. + +Sincerely, + +Benjamin Mako Hill\\ +\emph{MIT Sloan School of Management}\\ +\emph{MIT Program in Media Arts and Sciences (MIT Media Lab)} + +%\closing{Sincerely,} + +\end{letter} + +\end{document}